Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAccepted-AOC 4 94D RAJA COTTAGE 1ST FLOOR KANYAKULAM PARVATHIPURAM NAGERCOIL KANNIYAKUMARI TAMILNADU 629 003 | KANNIYAKUMARI | TAMIL NADU | 629003 | L1 | Accepted-AOC L1 | |
| 2 | L2₹16.3 L+₹52,971.60 (3.35%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹16.6 L+₹82,359.60 (5.21%)Rejected-AOC NO 7 3RD MAIN ROAD MUNI REDDY LAYOUT HORAMAVU MAIN ROAD BANASAWADI BANGALORE 560043 | BENGALURU URBAN | KARNATAKA | 560043 | L3 | Rejected-AOC L3 | |
| 4 | L4₹17.0 L+₹1.2 L (7.41%)Rejected-AOC | L4 | Rejected-AOC L4 | |
| 5 | L5₹17.6 L+₹1.8 L (11.5%)Rejected-AOC 34 B A HOUSE NO 253 3 SECTOR C KALERHARI CHURCH ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L5 | Rejected-AOC L5 |
| Sl No | Description | Qty | Unit | chowdeshwariconstructionco L6 | SREE VARU ELECTRICALS L4 | ARUNOTHAYA TRADERS L3 | ADR ENTERPRISES L1 | SRINIDHI DIESELS & ELECTRICALS L7 | SRI AYYAPPA ENTERPRISES L2 | navreet construction L5 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Repairs and servicing of Split case centrifugal two stage, pump set 50 HP Pump Set DSM 100/36, with and including replacing the following worn out parts and re-erecting, testing and commissioning all as specified and as directed
(a) Coupling bolts
(b) Coupling rubber bushes
(c) Split casing gaskets
(d) Gland bolt and gland packing
(e) Shaft sleeves
(f) Replacing the air cock greasing nipples etc.,
(g) Replacing impeller and fixing of rubber mounting vibration pad mounting frame, foot valve leather with nuts and bolts etc., installed inside the pump house all as specified and directed. | 1 | Each Job | 17,500 ₹17,500 | 17,000 ₹17,000 | 20,000 ₹20,000 | 17,400 ₹17,400 | 18,000 ₹18,000 | 14,000 ₹14,000 Lowest | 16,000 ₹16,000 |
| 2.00 | All as per Item No.01 but pump set of capacity 30 HP TYPE DSM-3 all as specified and directed. | 1 | Each Job | 13,500 ₹13,500 | 12,000 ₹12,000 | 15,000 ₹15,000 | 13,500 ₹13,500 | 14,000 ₹14,000 | 11,000 ₹11,000 Lowest | 15,000 ₹15,000 |
| 3.00 | All as per Item No.01 but pump set of capacity 40 HP TYPE DSM-3 all as specified and directed. | 1 | Each Job | 15,000 ₹15,000 | 12,000 ₹12,000 Lowest | 17,000 ₹17,000 | 14,500 ₹14,500 | 15,000 ₹15,000 | 13,000 ₹13,000 | 16,000 ₹16,000 |
| 4.00 | Repairs and servicing to Squirrel cage induction motor SPDP type, 3 Phase 415 volts, AC, 50 HZ, 50 HP, driving the pump set DSM 100/36, cleaning the inside of stator, rotor, varnishing and drying, re-erecting, aligning with the pump, testing and commissioning, with and including replacement of DE and NDE bearings, grease nipples, any other minor parts required for proper functioning, over hauling, terminals etc and the motor after preparing the surface all as specified and directed. | 1 | Each Job | 15,000 ₹15,000 | 12,500 ₹12,500 | 18,000 ₹18,000 | 15,000 ₹15,000 | 15,500 ₹15,500 | 13,000 ₹13,000 | 10,000 ₹10,000 Lowest |
| 5.00 | All as per Item No.04 but for 40 HP TYPE DSM-3 all as specified and directed. | 1 | Each Job | 13,000 ₹13,000 | 11,500 ₹11,500 | 15,000 ₹15,000 | 12,000 ₹12,000 | 12,500 ₹12,500 | 11,000 ₹11,000 | 10,000 ₹10,000 Lowest |
| 6.00 | All as per Item No.04 but for 30 HP TYPE DSM-3 all as specified and directed. | 1 | Each Job | 11,500 ₹11,500 | 10,000 ₹10,000 | 12,500 ₹12,500 | 11,000 ₹11,000 | 11,500 ₹11,500 | 9,000 ₹9,000 Lowest | 10,000 ₹10,000 |
| 7.00 | Repairs and servicing of Centrifugal Monoblock pump set, KDS type, driven by Squirrel cage induction motor, TEFC, 3 Phase 415 volts, AC, 50 HZ, 15 HP, cleaning the inside of stator, rotor, varnishing and drying, re-erecting, testing and commissioning, with and including replacement of DE and NDE bearings, shaft seal, any other minor parts required for proper functioning and applying two coat of synthetic enamel paint after preparing the surface all as specified and directed. | 2 | Each Job | 20,000 ₹40,000 | 9,000 ₹18,000 | 15,000 ₹30,000 | 9,500 ₹19,000 | 10,000 ₹20,000 | 8,000 ₹16,000 Lowest | 12,000 ₹24,000 |
| 8.00 | Repairs and servicing of Centrifugal Monoblock pump set, KDS type, driven by Squirrel cage induction motor, TEFC, 3 Phase 415 volts, AC, 50 HZ, 12.5 HP, stripping out the burnt winding and rewinding with super enameled copper winding wire of the same gauge varnishing and drying, re-erecting, testing and commissioning, with and including replacement of DE and NDE bearings, shaft seal, any other minor parts required for proper functioning, and applying two coat of synthetic enamel paint after preparing the surface all as specified and directed. | 3 | Each Job | 45,000 ₹1,35,000 | 12,500 ₹37,500 | 13,500 ₹40,500 | 13,000 ₹39,000 | 15,500 ₹46,500 | 13,000 ₹39,000 | 12,000 ₹36,000 Lowest |
| 9.00 | Repair and servicing of Centrifugal Monoblock pump set, 3 Phase 415 volts, AC, 50 HZ,Capacity 0.5HP-2HP, stripping out the burnt winding and rewinding with super enameled copper winding wire of the same gauge varnishing and drying, re-erecting, testing and commissioning, with and including replacement of DE and NDE bearings if any, shaft seal, any other minor parts required for proper functioning and applying two coat of synthetic enamel paint after preparing the surface all as specified and directed. | 4 | Each Job | 4,800 ₹19,200 | 4,000 ₹16,000 | 5,000 ₹20,000 | 4,000 ₹16,000 | 4,500 ₹18,000 | 3,500 ₹14,000 Lowest | 5,000 ₹20,000 |
| 10.00 | All as per Item No.09 but of capacity 3 HP | 1 | Each Job | 7,800 ₹7,800 | 7,000 ₹7,000 | 6,500 ₹6,500 | 7,000 ₹7,000 | 7,500 ₹7,500 | 4,500 ₹4,500 | 3,000 ₹3,000 Lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
31 May 2025, 6:00 pmClosed
GE (AF) Yelahanka
GE (AF) Yelahanka Bangalore - 63
REPAIR/REPLACEMENT OF PUMP SETS, MOTOR, PANEL, FOOT VALVES AND ALLIED WORKS AT AFS YELAHANKA
2025_MES_706584_1
8372/E8
Open Tender
Civil Works
Item Rate
330 days
Yelahanka
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) Yelahanka
₹40,000
Yes
8 Aug 2025
3 May 2025
7 Jun 2025
3 May 2025
31 May 2025
17 May 2025
Amount
Repairs and servicing of Split case centrifugal two stage, pump set 50 HP Pump Set DSM 100/36, with and including replacing the following worn out parts and re-erecting, testing and commissioning all as specified and as directed (a) Coupling bolts (b) Coupling rubber bushes (c) Split casing gaskets (d) Gland bolt and gland packing (e) Shaft sleeves (f) Replacing the air cock greasing nipples etc., (g) Replacing impeller and fixing of rubber mounting vibration pad mounting frame, foot valve leather with nuts and bolts etc., installed inside the pump house all as specified and directed.
All as per Item No.01 but pump set of capacity 30 HP TYPE DSM-3 all as specified and directed.
All as per Item No.01 but pump set of capacity 40 HP TYPE DSM-3 all as specified and directed.
Repairs and servicing to Squirrel cage induction motor SPDP type, 3 Phase 415 volts, AC, 50 HZ, 50 HP, driving the pump set DSM 100/36, cleaning the inside of stator, rotor, varnishing and drying, re-erecting, aligning with the pump, testing and commissioning, with and including replacement of DE and NDE bearings, grease nipples, any other minor parts required for proper functioning, over hauling, terminals etc and the motor after preparing the surface all as specified and directed.
All as per Item No.04 but for 40 HP TYPE DSM-3 all as specified and directed.
All as per Item No.04 but for 30 HP TYPE DSM-3 all as specified and directed.
Repairs and servicing of Centrifugal Monoblock pump set, KDS type, driven by Squirrel cage induction motor, TEFC, 3 Phase 415 volts, AC, 50 HZ, 15 HP, cleaning the inside of stator, rotor, varnishing and drying, re-erecting, testing and commissioning, with and including replacement of DE and NDE bearings, shaft seal, any other minor parts required for proper functioning and applying two coat of synthetic enamel paint after preparing the surface all as specified and directed.
Repairs and servicing of Centrifugal Monoblock pump set, KDS type, driven by Squirrel cage induction motor, TEFC, 3 Phase 415 volts, AC, 50 HZ, 12.5 HP, stripping out the burnt winding and rewinding with super enameled copper winding wire of the same gauge varnishing and drying, re-erecting, testing and commissioning, with and including replacement of DE and NDE bearings, shaft seal, any other minor parts required for proper functioning, and applying two coat of synthetic enamel paint after preparing the surface all as specified and directed.
Repair and servicing of Centrifugal Monoblock pump set, 3 Phase 415 volts, AC, 50 HZ,Capacity 0.5HP-2HP, stripping out the burnt winding and rewinding with super enameled copper winding wire of the same gauge varnishing and drying, re-erecting, testing and commissioning, with and including replacement of DE and NDE bearings if any, shaft seal, any other minor parts required for proper functioning and applying two coat of synthetic enamel paint after preparing the surface all as specified and directed.
All as per Item No.09 but of capacity 3 HP
All as per Item No.09 but of capacity 5 HP
All as per Item No.09 but of capacity 10 HP
S&F gland packing of required size of gland of superior quality to centrifugal / monoblock pumps of following capacities all as specified and directed
(a)For 30 to 50 HP pump set
(b)For 3 to 15 HP pump sets
Repair and servicing of star delta starter 10 HP to 20 HP removing carbon with carbon remover and cleaning contactor parts smoothly with brush and replacing the burned wiring and thimbles all as specified and as directed.
Repair and servicing of star delta starter 30 HP to 50 HP removing carbon with carbon remover and cleaning contactor parts smoothly with brush and replacing the burned wiring and thimbles all as specified and as directed.
S&F in repairs fully automatic star delta starter complete suitable for centrifugal pump set 15 HP complete all as specified and directed.
S&F in repairs direct on line starter suitable for 3Phase ,440V & 5HP to 7.5HP along with single phase preventer all as specified and as directed.
S&F in repairs Cast Iron foot valve of 150 mm bore conforming to IS 4038 including provision of nuts bolts and washers etc., including taking out unserviceable existing foot valve complete all as specified and directed.
S&F in repairs Cast Iron foot valve of 100 mm bore conforming to IS 4038 including provision of nuts bolts and washers etc., including taking out unserviceable existing foot valve complete all as specified and directed.
S&F in repairs Cast Iron foot valve of 80 mm bore conforming to IS 4038 including provision of nuts bolts and washers etc., including taking out unserviceable existing foot valve, complete all as specified and directed.
S&F in repairs Cast Iron foot valve of 50 mm bore including nuts bolts and wahsers etc., including taking out unserviceable existing foot valve, complete all as specified and as directed.
Dismantling the delivery pipe line of submersible pump set from water mains, lifting/taking out of GI column pipes of 50mm dia, submersible cable, defective submersible pump sets any capacity from borewells up to 250 mtr depth for repairs and lowering of repaired pump sets with GI column pipe 50mm dia, cable etc complete in the borewell at various sites under GE (AF) Yel. The job is inclusive of M&L for jointing of submersible cable, reconnecting the delivery pipe line to water mains, testing for satisfactory running and continous flow of water complete all as directed. Note: Reparing/ Servicing of submersible pump set shall be mesured and paid separately.
Repairs and servicing of defective submersible pump of capacity of 5 HP, 7.5 HP and 10 HP by dismantling the pump and removing unserviceable parts, assemble the pump properly after replacement of unserviceable parts. Note : (a) The rates are inclusive of transportating the pump set to workshop and back to site. (b) The rates are inclusive of turning/finishing work for fixing of parts properly. (c) Unserviceable parts if any replaced shall be measured and paid separately as supply only under Item No-26. (d) The rates are inclusive of testing, installation and satisfactory functioning of the pump set.
Supply only of following parts of submersible pump sets of capacity upto 10 HP :-
(a) CI Stage casing
(b) GM Bush
(c) SS Sleeve
(d) suitable size impeller
(e) MS Key for Shaft
(f) SS studs with nuts of suitable size for pump
(g) SS coupling bush common for pump and motor with key
(h) High Tensile steel shaft
Rewinding of mono block pump set single phase of capacity 1 to 2 HP by taking out burnt copper winding from stator, cleaning the casing and slots with wire brush and washing with pressure water and dried it, re-winding the motor with required gauge of insulated copper wire and making the winding leak proof and connection lead suitable size of cable upto 2 mtr long all as specified and directed.
Rewinding of submersible motor 3 phase of capacity 3 HP by taking out burnt copper winding from stator, cleaning the casing and slots with wire brush and washing with pressure water and dried it , re-winding the motor required gauge of insulated copper wire and making the winding leak proof and connection lead suitable size of submersible cable upto 2 mtr long all as specified and directed.
All as per item No 26 but of capacity 5 HP
All as per item No 26 but of capacity 7.5 HP
All as per item No 26 but of capacity 10 HP/15 HP
Repairs to GI column pipe of 50mm bore, by cutting the worn out portion of threads and rethreading at each end of pipe all as specified and directed.
S&F in repairs flat cable PVC insulated and sheathed multi-stranded copper conductor water proof suitable for submersible pump set of size 6 Sqmm 3 core complete all as specified and directed.
S&F in repairs flat cable PVC insulated and sheathed multi-stranded copper conductor water proof suitable for submersible pump set of size 4 Sqmm 3 core complete all as specified and directed.
S&F in repairs flat cable PVC insulated and sheathed multi-stranded copper conductor water proof suitable for submersible pump set of size 10 Sqmm 3 core complete all as specified and directed.
Dismantling the electric connection from the induction motor and taking down the motor 50 HP after removing the necessary nuts/ bolts and coupling etc and transporting to local workshop and Dismantling and opening the AC motor by unscrewing the bolts / nuts end cover etc and taking out the burnt starter and rotor windings, cutting and removing the burnt out copper windings complete from the startor slots including necessary cleaning thoroughly with a wire brush and dried it . Material and labour for rewinding with super enameled copper wire as per the existing gauge including placing the fibre glass sleeves and insulating paper glass F (numen) and applying appropriate varnish drying, replacement of bearings 2 Nos and properly assembling including testing and transporting back to the Pump House , assembling the motor carefully to its original position including necessary electric and other connections and testing to the satisfaction complete all as specified and directed.
Dismantling the electric connection from the motor and taking down the motor 15 HP after removing the necessary nuts/ bolts and coupling etc and transporting to local workshop and Dismantling and opening the AC motor by unscrewing the bolts / nuts end cover etc and taking out the burnt starter and rotor windings, cutting and removing the burnt out copper windings complete from the startor slots including necessary cleaning thoroughly with a wire brush and drying and applying a coat of varnish etc all as specified and including material and labour for rewinding with super enameled copper wire as per the existing gauge including placing the fibre glass sleeves and insulating paper glass F (numen) and applying appropriate varnish drying, replacement and properly assembling including testing and transporting back to the Pump House , assembling the motor carefully to its original position including necessary electric and other connections and testing to the satisfaction of complete all as specified and directed.
All as per item No 35 but Capacity 10 to 12.5 HP
All as per item No 35 but Capacity 7.5 HP
All as per item No 35 but Capacity 5 HP
All as per item No 35 but Capacity 3 HP
Chemical and Bacteriogical analysis of water as per IS 10500 parmeter, sample collected from bore well /shallow wells /BWSSB water /user point all as directed. Note : water to be tested once in 06 months from approved NABL Lab.
Taking out the unserviceable /corroded GI pipe (Suction pipe ) 150 mm dia from UG sump/shallow well supply and fixing GI Pipe medium grade 150mm dia 3.5 mtr to 4 mtr length including bends and provn to fixing foot valve complete all as specified and directed.
Taking out the unserviceable /corroded GI pipe (Suction pipe ) 100 mm dia from UG sump/shallow well supply and fixing GI Pipe medium grade 100mm dia 3.5 mtr to 4 mtr length including bends and provn to fixing foot valve complete all as specified and directed.
Taking out the unserviceable /corroded GI pipe (Suction pipe ) 80 mm dia from UG sump/shallow well supply and fixing GI Pipe medium grade 80mm dia 3.5 mtr to 4 mtr length including bends and provn to fixing foot valve complete all as specified and directed.
Excavation in trenches in hard/dense soil not exceeding 1.5 mtr width and not exc 1.5 mtr deep for laying of pipe Hard dense soil etc and getting out all as specified.
Returning, filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick hard soil all as specified and directed.
Removing surplus soil to a distance 15mtr and deposit where directed at a level not exceeding 1.5 mtr above the starting point.
Taking out old unserviceable UG cable and Supply and laying 70 Sqmm, 3.5 Core LT UG cable grade PVC XLPE insulated, PVC sheathed armoured, heavy duty, in trenches / walls / poles / passing through pipes with multistranded aluminium conductor including lugs / thimbles / ferrules connection, testing and commissioning Complete all as specified and as directed.
Taking out old unserviceable UG cable and Supply and laying 35 Sqmm, 4 Core LT UG cable grade PVC XLPE insulated, PVC sheathed armoured, heavy duty, in trenches / walls / poles / passing through pipes with multistranded aluminium conductor including lugs / thimbles / ferrules connection, testing and commissioning Complete all as specified and as directed.
Taking out old unserviceable UG cable and Supply and laying 25 Sqmm, 4 Core LT UG cable grade PVC XLPE insulated, PVC sheathed armoured, heavy duty, in trenches / walls / poles / passing through pipes with multistranded aluminium conductor including lugs / thimbles / ferrules connection, testing and commissioning Complete all as specified and as directed.
Material and Labour for G.I. tubing light grade of size 50mm bore for protection of cables to be laid under roads, crossings / culverts Complete all as specified and as directed.
Repair and replacement of pressure gauge 4 inch diameter 0-21 Kgs rating for pump sets and complete all as specified and directed all as directed.
M&L for replacing unserviceable CI impeller suitable for 50 HP pump all as specified and directed.
M&L for replacing unserviceable fan blade suitable up to 50 HP Pump all as specified and directed.
S&F in repairs Voltmeter Analog size 4 inch x 4 inch , 0-500 Volts Complete all as specified and as directed.
S&F in repairs Cast Iron Non return valve 100mm bore conforming to IS including nuts bolts and washers packing etc., Complete all as specified and as directed.
S&F in repairs Cast Iron Non return valve 80mm bore, conforming to IS including nuts bolts and washers packing etc., Complete all as specified and as directed.
M&L for Plain Cement Concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in Coping, bands benching etc including finishing the concrete surfaces even and smooth without using extra cement including necessary form work Complete all as specified and directed.
S&F in repairs MCCB 3 Pole, 415 volts 50 HZ AC suitable for current carrying capacity 160 Amps rating, fixed and thermal magnetic release with rupturing capacity 25 KA all as specified and directed.
S&F in repairs MCCB 3 Pole, 415 volts 50 HZ AC suitable for current carrying capacity 25 Amp to 100 Amp rating, fixed and thermal magnetic release with rupturing capacity 16 KA all as specified and directed.
S&F in repairs MCCB 4 Pole, 415 volts 50 HZ AC suitable for current carrying capacity 200 Amps rating, fixed and thermal magnetic release with rupturing capacity 35 KA all as specified and directed.
Supply and Fixing in repairs Ammeter digital type 0-200 Amps Complete all as specified and as directed.
S&F synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m Complete all as specified and as directed.
S&F in repairs Gun metal gate valve with iron wheel head ISI marked screwed both ends complete for 20 mm dia iron pipes all as specified and as directed.
Washing/cleaning of deep bore well of standard size upto 50m deep in all kind of soil and rock in rural and urban area including cost of hydraulic machine, tools, drilling ring, air compressor and equipment as well as fuel, lubricant and all complete work for finishing all as specified and as directed.
All as per item No 64 but depth above 50m to 100m depth
All as per item No 64 but depth above 100m to 150m depth
All as per item No 64 but depth above 150m to 200m depth
Taking Up the existing LT Panel from its foundation and S&F in repair Outdoor panel without switch gear and covered with wood fitted inside for switchgear and equipment fixing etc and totally enclosed dust and vermin proof, free standing, for outdoor use with bottom cable entry with suitable cable glands made out of front framed structure of rolled folded steel channel section of minimum 3.15 mm thickness rigidly bolted/welded together with angle iron frame works with suitable legs of ISA 40x40x5mm with four legs grouted PCC (1:2:4) type B1, foundation block with suitable mounting arrangement suitable for 415 volts, 3 phase, 50 Hz, 4 wire AC system conforming to IS : 375 all as specified herein after and refixing the existing switchgear, electrical connections all as specified and directed
Repairs and servicing of horizontal Split type single delivery centrifugal pump set 100 HP PumpSet, duly replacing the following worn out parts and re-erecting, testing and commissioning all as specified and as directed (a) Coupling bolts (b) Coupling rubber bushes (c) Split casing gaskets (d) Gland bolt and gland packing (e) Shaft sleeves (f) Replacing the air cock greasing nipples etc. ,(g) Replacing of fan blade and fixing of rubber mounting vibration pad mounting frame, suction pipe up to the sump, delivery pipe, valves, meter, specials etc., installed inside the pump house all as directed.
S&F in repair seat washer suitable for fire hydrant valve of size 63mm all as specified and directed
S&F in repair coupling washer suitable for fire hydrant valve of size 63mm all as specified and directed
S&F in repair Fire hydrant Blank cap rust proof suitable for fire hydrant valve of size 63mm all as specified and directed
S&F in repair metal hydrant wheel suitable for fire hydrant valve of size 63mm all as specified and directed
Material and labour for repair in Stainless steel Single Headed Oblique Type Hydrant Valve (Type 'A') with Cast Iron operating wheel, Inlet 80mm & Outlet 63mm Instantaneous, IS:5290, ABS Blank Cap including taking down unserviceable hydrant valve of any description, complete all as specified and directed.
Material and labour for repair in Stainless steel Double Headed Oblique Type Hydrant Valve (Type 'B') with Cast Iron operating wheel, Inlet 100mm & Outlet 63mm Instantaneous, IS:5290, ABS Blank Cap including taking down unserviceable hydrant valve of any description, complete all as specified and directed.
Material and labour for repair in Fire brigade inlet connection 2way (2way inlet breaching) including taking down unserviceable fire brigade inlet of any description, complete all as specified and directed.
Material and labour for repair in Fire Hose Box fabricated from 18 gauge CR sheet with double door, with full front glass inspection window and locking arrangement (Common Key Lock), duly painted with PO Red colour outside and white colour from inside (two coats of synthetic enamel paint), Size 30"X24"X10", 3mm thick Acrylic glass, (Suitable to accommodate 2 lengths of 15mtr, Hoses & 1 no. branch pipe with Nozzle) including taking down unserviceable fire hose box of any description, complete all as specified and directed.
Material and labour for Thermoplastic Hose - 20mm dia, 30M length, IS:12585 Type 2 including taking down unserviceable rubber hose of any description, complete all as specified and directed.
Material and labour for PVC Hose Reel Nozzle for 20mm hose, jet spray type with serrated end for hose fitting with hose clamps including taking down unserviceable hose reel nozzle of any description, complete all as specified and directed.
Material and labour for stainless steel hand controlled Nozzle hydraulically crimped to hose with metal crimping, Spray and Shut off functions, Operating at 10 bar working pressure, with 20mm diameter including taking down unserviceable nozzle of any description, complete all as specified and directed
Material and labour for ISI marked non-percolating flexible firefighting delivery hose of length 15 meters, synthetic fiber circular woven jacketed, bearing IS:636-2018, 63 mm dia, complete with stainless steel instantaneous male & female coupling (IS:903), and Copper Wire binding including taking down unserviceable firefighting delivery hose of any description, complete all as specified and directed.
S&F in repair Hose pipe HDPE Laminated of size 4 Inch(100mm) for Fire filling point along with clamps for fixing all as specified and directed
All as per item No 82 but of size 3inch(80mm)
All as per item No 82 but of size 2inch(50mm)
SRI AYYAPPA ENTERPRISES (BID ID -3302828)
ARUNOTHAYA TRADERS (BID ID -3309825)
SREE VARU ELECTRICALS (BID ID -3309654)
navreet construction (BID ID -3304505)
chowdeshwariconstructionco (BID ID -3308581)
SRINIDHI DIESELS & ELECTRICALS (BID ID -3303595)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .