C/O Science Lab at Govt S.S.SCHOOL Bangana distt una H.P.

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (SSK/L&T/Anchor make)

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Finolex/KEI/Anchor/L&T make)

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Finolex/KEI/Anchor/L&T make)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(Finolex/KEI/Anchor/L&T make)

2x1.5 Sq. mm.

2x10 Sq. mm.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.(Finolex/KEI/Anchor/L&T make)

3x1.5 Sq. mm.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-(Diplast/Polycab make)

25 mm. dia

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required. (SSK/L&T/Anchor make)

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required. (SSK/L&T/Anchor make)

Supplying and fixing bakelite batten/angle holder including connections etc. as required:- (SSK/Anchor make)

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required:-

Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx350mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-(Legrand/Schneider/Siemens make)

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-(Hagger/ABB/L&T make)

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-(Hagger/ABB/L&T make)

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Hagger/ABB/L&T make)

63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- (Hagger/ABB/L&T make)

Double door-12 way

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. Below ground level for earth electrode conductor, including soldering etc. as required.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- (Usha - SPH Turbo HDEF 900 RPMISI or its Equivalent make)

Exhaust Fan, light duty, 300 mm sweep

Exhaust Fan, Heavy duty, 300 mm sweep

Supplying and fixing Step type fan regulator (Socket type) 100 watts on the existing switch box/cover complete making connections etc,as required.(SSK make, Touch model Cat.No..TU 614 or its equivalent make)

Providing, Installation, testing and commissioning of ceiling fan without regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- ( Usha-Technixplus BEE 3 Star rated model) or its equivalent make)

Ceiling Fan 1200 mm sweep, Category-A

S/F Computer board comprising 3 No.5 amps.switch (piano) and 3 No.3 pin 5 amps. Socket out let (piano) and 250mmX300X100mm deep switch board with cover plate including connections etc,as required,complete in all respects..(SSK/L&T/Anchor make)

Supplying and fixing Fan box of M.S.sheet with iron rod hook 12 mm.in place of junction box complete as required.

Supplying and fixing exhaust fan louver shutter for 300 mm.exhaust fan on the existing wall,painting etc, as required.(National or its equivalent make)

Providing and fixing MCCB four pole 32 amps to 63 amps.rating and 18 KA breaking capacity 415 volts AC.supply 50 HZ four pole DU 100 D type in the existing enclosure including making connections etc,as required. (L&T/ABB/Siemens make)

Providing and fixing LED Street light 60 watts aluminium Black/grey body ,AC 85-270 volts ,available color temperature 5700 K,CRI 80,IP rating 66, up to 10KVA electric surge protection and diamensions 375x144x108 mm. complete with all Bracket, accessories, connections testing and commissioning etc,as required. (Pansonic Code No.PSTM16608/Clair/Philips make)

Providing and fixing LED surface/pendent mounting Tube fixture 20 watts LED batten anodized extruded aluminium housing high transmissibility diffuser and it should be compatible with specifications i.e.Power factor >0.9,Harmonic distortion <10% & efficacy >100 Lumen per watts,CRI >80 ,5700 K suitable for input voltage 220-240 Volts,50 HZ, Lenght 1175X30X36 mm.complete with connections and as per best satisfaction of Engineer-in-Charge complete as required.(Panasonic Harrowal Code No.PBTM08208/Philips/Jaquor/Tisva make)

Supplying and fixing surface mounting LED 18 watts metal square/Round down light for soft diffuse lighting cool white and it should be compatible with specifications i.e.Power factor >0.9,Harmonic distortion <10% & efficacy >100 Lumen per watts,CRI >80 ,4000 K suitable for input voltage 220-240 Volts,50 HZ,IP rating 20,Surge rating up to 3 KV,diamensions 19.5X19.5x3.0 mm. complete with connections etc,as required. (Tisva Hector Pro Code No.DLP1832402/Pansonic/Philips/Jaquor make)

Supply of IP40 Led fixture 40 W with Surface Mounted 4 Feet with Polycarbonate diffuser with aluminium housing minimum lumen output 4000 lumens with P.F.>0.95 with THD<10% ,CRI 80,Surge Protection 2 Kv with IP Protection of IP20 .The LEDs with minium life of 50000 burning hours.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80. LEDs used must be tested as per EN62471 for Photobiological Safety of humans. The Input voltage range shall be 150V to 270V . Driver Output voltage shall be less than SELV Limits for safe operation and maintenance.Wipro Cat. No LL24-541-XXX-57-XX or Equivalent in Philips : BN308C LED40S-6500 L120 PSU WH or Trilux:TRL-X F OTA 4000-857 ET

Supplying and fixing surface mounting LED 36 watts metal Square down light for soft diffuse lighting cool white and it should be compatible with specifications i.e.Power factor >0.9,Harmonic distortion <10% & efficacy >100 Lumen per watts,CRI >80 ,CCT 5700 K suitable for input voltage 220-240 Volts,50 HZ,IP rating 20,Surge rating up to 3 KV,diamensions 600X600 mm. complete with connections etc,as required. (WiproNo.CRCO10S038HP57GL1Tisva/Pansonic/Philips orits equivalent make)

Supplying & fixing, testing, commisioning of storage type water cooler with reciprocating compressor of ISI marked, environment friendly new age refigerant of rugged stainless steel/ galvanized steel body. Total storage capacity 120 Lt. and cooling capacity 60 Lt/Hr with 2 Nos of faucets and all accessories etc. . Make Usha, Blue Star, Carrier or its euivalent make.

Supplying and drawing Lan cable Cat.6,solid copper conductor protected with PVC.sheath in the existing surface/recessed steel/PVC conduit as required.( D-Link or its equivalent make)

Supplying and fixing of Bulk head fitting LED 10 watts and it should be compatible with specifications i.e.Power factor >0.9,Harmonic distortion <10% & efficacy >100 Lumen per watts,CRI >80 ,6500 K suitable for input voltage 220-240 Volts,50 HZ, Length 232x Width 105x Height 50 mm size complete with connections etc,as required.(Panasonic Ellipto Code No.PBHM01107/Philips/ Jaquor/Tisva make )

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-(Finolex/KEI/Polycab or its equivalent make)

Armoured cable 25 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, unarmoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-(Finolex/KEI/Polycab or its equivalent make)

Armoured cable 25 sq. mm (3.5 core)

KISHORI LAL SHARMA GOVT. CONTRACTOR