AS PER NIT WORK NO. 5

E/W cutting in or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5m lift and 30 m lead. The earth in form of cutting (b) to be used as spoil banks within 50 m distance as directed by the engineer-in-charge including royalty 9.00 cum. (SI No. 253(A)) Including Cartage of earth up to 8 km lead.

Providing and laying cement concrete in 1:3:6 (1 cement : 3 Fine Sand : 6 Graded Stone aggregate 40 mm nominal size) & curing complete, including cost of form work, in foundation & floors.Clause 12.04, 2100

Supply and Laying of Precast concrete Blocks (Interlocking Tiles) for paving of thickness 80mm Rubber Moulded Grey. (Compressive Strength not less then 30Mpa as specified in IS: 15658) Inculding 25 thick local sand base levelling and dressing of surface to required level and slope, filling joints with Local sand all complete work as specified ij IS 15658:2006. (S.No 16 Page No 52)

Supply and Laying of Precast concrete Blocks (Interlocking Tiles) for paving of thickness 80mm Rubber Moulded Colour. (Compressive Strength not less then 30Mpa as specified in IS: 15658) Inculding 25 thick local sand base levelling and dressing of surface to required level and slope, filling joints with Local sand all complete work as specified ij IS 15658:2006. (S.No 16 Page No 52)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. Chapter 20 Item No 1

M-150 Brick work in 1:4 with Cement and coarse sand including supply of all material, labor T & P etc. required for proper completion of work. (SI No. 02 Page No 17)

Plastering With cement mortar 1:3 on brick work in sub-structure complete as per drawing and Technical Specifications Clause No. 13.03, 1300 & 2200

12.08 CASE-II Plain Cement Concrete (PCC Grade M15) in Open Foundation complete as per drawing and Technical Specificatons. Clause 1500, 1700 & 2100

Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars). Item No 504 Analysis By As per Current market rate.

13.05, E Reinforced Cement Concrete (M-20) in sub-structure Complete as per drawing and Technical Specifications. Clause 1500, 1700 & 2100