WBPWD/SEWEC /BED /NIQ-62/2022-23

Amount

SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd.

PART-A

Make : OTIS / KONE/SCHINDLER

Type: Bed cum passenger Lift .

Load : 20 Passenger / 1360 Kg

Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF)

Machine:- Energy efficient machine, Gearless, with Machine Room

Position of Machine Room: Directly above the lift shaft

Speed: 1Mtrs./ Sec

Floor served: B2+B1+G+3

Landing: 06 (Six), all on same side

Total Rise :23.4 Mtr (Approx) (Bidder should visit the site)

Operation: Microprocessor based simplex full collective with or without attendant.

Signals : Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button with braille. Button : All buttons on car & landing shall be luminous & encoded with braille on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendent mode of operation. Display type: Monochrome/Colour LCD/Segmented LCD/ Scroll. Operation Push Buttom for lift maintenance & service should be on top of the car.

Leveling accuracy:±5 mm(Micro levelling arrangement )

Car inside :1300 mm ( W ) x 2200 mm ( D ) x 2400mm(H)

Car Entrance : Clear Opening 1100 mm (W) x 2000 mm (H ) protected with car door

Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail.

Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan

Car Ventilation: Axial fan with anodised aluminium /SS grill.

Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order).

Car Door: Stainless Steel centre opening (COPD/TSPD)automatic door provided with V3F controlled door drive system with fire rating of 120min.

Landing Door:- Stainless Steel Center Opening Panel Door / Telescopic Sliding Panel Door(COPD/TSPD) synchronizing with car doorwith fire rating of 120min

Door Saftey: Full length Photocell assembly light curtain sensor

PROTECTIVE DEVICES & OTHER ACESSORIES

ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others.

Overload Protection:Fully loaded with overload protection. On overloading condition the lift car will not start with door remaining open and give audio & display indication

Emergency lighting in car: Battery operated emergency lighting in the lift car.

Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room

Emergency Alarm: Battery operated alarm bell system in lift car and control room

Fireman switch: Fireman switch at ground floor.

Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the lift.

Main Wire rope/Belt - As per manufacturer's standard conforming to IS

DIMENSION OF SHAFT & POWER SUPPLY

Available Shaft Dimension :2200 mm (Wide) X 3000(Depth) mm

Pit Depth : 1600 mm (Bidder should visit the site)

Overhead : 4500 mm(Bidder should visit the site)

Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS ,

L. T. ELEVATOR PRIVATE LIMITED

Escon Elevators Pvt. Ltd.