PROVN OF PARKING SHED IN FRONT OF SMQ S PH I AT AIR FORCE STATION PATHANKOT

Amount

Material and labour for surface excavation in any type of soil n.exc 30 cm and averaging 15cm deep including clearing away all grass vegetation, shrubs , roots and trees not exc 30cm girth complete and getting out complete all as specified and directed by Engineer-in-Charge.

Material and labour for excavation in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning filling and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil complete all as specified and directed by Engineer-in-Charge.

Material and labour for Hardcore using broken stone boulders not exceeding 63mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil not exc 1.50 mtr wide and not exc 1.50 mtr depth for foundation etc or for shafts, wells, cseepits, manholes, pier holes etc. not exc 1.5m in depth and getting out complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil material n exc 50m and depositing where directed at a level n. exc 1.50m above the starting point complete all as specified and directed by Engineer-in-Charge.

Removing excavated material beyond distance exc 50m and upto 250m and depositing where directed at a level n. exc 1.50m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete for post holes complete all as specified & directed.

Supply and fixing rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates and similar work,posts, conforming to Fe-410-W(Gde-250 quality B) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for MS plated (plain or chequred ) channel, cleats, square cut or notched (ordinary and counter sunk) forming holes complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws/ complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 Cm width and girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 Cm width and girth, not otherwise described and applying two coats of black bituminious paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75mm thick cement concrete (1:4:8) type D-2, using 40mm graded agg as in sub base to floors etc including complete all as specified and directed by Engineer-in-Charge.

Material and labour for 60 mm thick Machine pressed coloured (red/yellow combination) precast cement concrete interlocking paver block any shape and sizs as directed, confirming to IS 15658-2006, M-35 Grade as in floor etc. with grey cement and pigment , interscts to be filled with fine sand free from foreign particles complete all as specified and directed by Engineer-in-Charge.

Material and labour for sand filling under paver blocksor floors including watering and consolidation all as spd complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC 1:2:4, type B1 (using 20mm graded stone aggregate), as in coping, mud stopping, kerbs, kneelers and the like incl weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

Material and labour for brick work with sub class B bricks straight or curved on plan 6m mean radius built in cm 1:6 complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement as directed , complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered surfaces and applying two coats of weather proof acrylic exterior emulsion paint as approved of any shade/colour in camouflage pattern over a coat of primer including preparation of surfaces as per manufacture instructions complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Reinforced concrete pipes,of bore of pipe in 300 mm class NP2, laid & jointed complete with collars complete all as specified and directed by Engineer-in-Charge.

Material and labour for concrete bed to drain pipes of bore 300mm dia including packing under hunching against the sides of pipe after they are laid tested in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates complete all as specified and directed by Engineer-in-Charge.

PARVINDER BHARDWAJ

M/S MULTI ENGINEERS

M/S SINGH AND ASSOCIATES

JAGDISH SINGH ASSOCIATES

D R CONTRACTORS

kewal builders

M/s Shakti Electric Works

A R ENTERPRISES

KUMAR TRADING CO