Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC 270 ADARSH NAGAR ROORKEE HARIDWAR 247667 | HARIDWAR | UTTARAKHAND | 247667 | L1 | Accepted-AOC Due to lowest bidder | |
| 2 | L2₹40.8 L+₹69,415 (1.73%)Rejected-Finance PEMASAR ROAD WARD NO 04 UDASAR BIKANER RAJ 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L2 | Rejected-Finance Due to not lowest bidder | |
| 3 | L3₹42.9 L+₹2.8 L (7.02%)Rejected-Finance | L3 | Rejected-Finance Due to not lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
21 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (N) BIKANER
GE (N) BIKANER (RAJASTHAN) PIN-334001
DOOR TO DOOR MAINT OF MD ACCN ZONE D IN AGE B R-II AT MIL STN UNDER GE (N) BIKANER
2023_MES_610314_1
GE (N) BKN-TOKEN/45/2023-24
Open Tender
Civil Works
Item Rate
335 days
GE (N) BIKANER
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (N) BIKANER
₹90,000
Yes
16 Jan 2024
22 Jul 2023
28 Aug 2023
22 Jul 2023
21 Aug 2023
7 Aug 2023
Amount
Demolition of cement conc. In any description and inc any position not otherwise specially provided complete all as specified and as directed by Engineer in charge.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessoriesas specified and as directed by Engineer in charge.
Dismanting floor, hearth or wall tiling including cement mortar bedding and removal of rubbish out of the premises as specified and as directed by Engineer in charge.
Taking down cement plaster on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water etc as specified and as directed by Engineer in charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) size n.exc 1.5 sqm each as specified and as directed by Engineer in charge.
Taking down old rusted and damaged steel window /vents incl.guard bar and grill where exists of size not exc.1.5 sqm each as specified and as directed by Engineer in charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) size exc 1.5 sqm and n.exc 4 sqm each as specified and as directed by Engineer in charge.
Taking down shutters of any description n exc 1 Sqm each pane as specified and as directed by Engineer in charge.
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each as specified and as directed by Engineer in charge.
Taking up or down steel tubing 15 mm dia and connections and stacking neatly for offering credit as specified and as directed by Engineer in charge.
Ditto all as per item Number 10 but 20 mm dia as specified and as directed by Engineer in charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone concrete or brick surrounds glazed with putty or fixed with beads as specified and as directed by Engineer in charge.
M&L for Figured glass, pin head type, 4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane as specified and as directed by Engineer in charge.
M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not execeeding 0.5 sqm in each pane for metal frames complete as specified and as directed by Engineer in charge.
S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns as specified and as directed by Engineer in charge.
S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns as specified and as directed by Engineer in charge.
M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in filling in chowkats, hold fast block etc. complete all as specified and as directed by Engineer-in-Charge.
S&F Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered partcile board medium density wood particle board with commercial faces venners supplied and fixed to chowkats as specified and as directed by Engineer in charge.
S& F 30 mm thick Flush shutters for door solid core construction, with block board core, and ply wood face panels with lipping to match complete all as specified and as directed by Engineer-in-Charge.
S&F Second class hard wood, glazed and skelleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members as directed supplied and fitted to chowkats as specified and as directed by Engineer in charge.
S&F Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples as specified and as directed by Engineer in charge.
S&F in repair Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples as specified and as directed by Engineer in charge.
M&L Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube suppling & fixing in opening all as specified and as directed by Engineer in charge.
M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bttom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all as specfied and as directed.
M&L Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) One side Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and including automatic lock, disgner handle , stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws ect all as per direction of Engineer -In-Charge
M&L A Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
M&L Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints as specified by Engineer in charge.
S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. With glazing bar dovtailed or welded including one shop coat of primeras specified by Engineer in charge .
S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. Without glazing bar dovtailed or welded including one shop coat of primer as specified by Engineer in charge.
S&F Steel ventilators with top hung shutter including hinges, steel peg stay , complete as specified by Engineer in charge.
S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0or Fe 310-0 as specified by Engineer in charge
S&F Butt hings, 100 mm long, extructed aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 as specified by Engineer in charge.
S&F Extruded aluminium alloy handles, 100 mm long, fabricated type anodisedas specified by Engineer in charge .
S&F Aluminium, anodised , 100 mm long, barrel tower bolts of extruded section and fixed as specified by Engineer in charge
S&F Aluminium alloy, anodised, slidding door bolt 300mm long, with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed as specified by Engineer in charge.
S&F in repair Butt hings, 100 mm long, extructed aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 as specified by Engineer in charge.
S&F in repair Extruded aluminium alloy handles, 100 mm long, fabricated type anodised as specified by Engineer in charge
S&F in repair Aluminium, anodised , 100 mm long, barrel tower bolts of extruded section and fixed as specified by Engineer in charge
S&F Teak wood beading 20x60mm half round complete supplied and fixed as specified by Engineer in charge.
S&F Prelaminated partical board 18/19mm medium density ,prelaminated with one side with decorative choice laqmination and other side balancing with white lamination fixed with screws as in shelves to kitchen almirah and cub board as specified and as directed by Engineer in charge.
S&F Hasp and staple 100mm aluminium anodised, safety type, with mild steel hinges pin including bolt to hinge plate and fixed with screws as specified and as directed by Engineer in charge.
S&F Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in repair as specified and as directed by Engineer in charge.
Mild steel work as in hold fasts, clamps, bands, straps etc conforming to Fe 410-0 as specified and as directed by Engineer in charge.
S&F Sinks with drainage board made of stainless steel 1mm thick kitchen or laboutery with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm 330 mm x 160mm as specified and as directed by Engineer in charge.
S&F in repair Stainless steel plate rack, tubular type, with fixing arrangement 900mm x 900 mm size all as specified and as directed by Engineer in charge.
S&F curtain rods, 20mm dia mild steel, chromium plated including brackets, stops etc and fixed in repairs as specified and as directed by Engineer in charge.
S & F in repair glass corner self of size 300mmx300mm with 5.5 mm thick glass and steelness steel clip and steelness steel railing allround the shelf complete all as specified and directed by engineer in charge .
M&L Non skid coloured Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors on 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete as specified and as directed by Engineer in charge.
M&L Glazed ceremic tiles coloured 450X300mmX7mm/350x250x7 mm thick coloured,set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floor tiles as on vertical surfaces laid over 10mm thick cement screed in 1:4as specified and as directed by Engineer in charge.
M and L for coloured Non skid ceramic tiles exceeding 0.11 sqm but not exceeding 0.18 sqm 7 to 8mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over 15mm thick screed in cement mortar 1:4 as specified and as directed by Engineer in charge..
Ditto all as per item No 51 above but on vertical surface over 10 mm thick rendering in CM (1:6) as specified and as directed by Engineer in charge..
M and L for 18- 20mm thick granite (of any type) work in steps, jambs,pillars, window cills, cooking platforms and like in 20 mm thick screed bed cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as specified and as directed by Engineer in charge.
M & L PCC 25 mm thick 1:2:4 type B0 (12.50 mm graded aggregate) in any position in ground floor/roof complete all as specified and as directed by engr-in-charge.
M&L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate finished even and smooth without using extra cement laid in panels complete complete all as specifed and as directed by engineer in Charge.
S&F PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring jointed fixed to walls as specified and as directed by Engineer in charge.
S&F PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring jointed fixed to walls as specified and as directed by Engineer in charge.
S&F PVC (SWR) branch piece, single (single Y) equal or unequal, 75mm bore as specified and as directed by Engineer in charge.
S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm bore as specified and as directed by Engineer in charge.
S&F PVC (SWR) bends any radius 75mm bore as specified and as directed by Engineer in charge.
S&F PVC (SWR) bends any radius 110mm bore as specified and as directed by Engineer in charge.
S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement as specified and as directed by Engineer in charge.
S&F 75mm Aluminium mortice lock vertical type 4 lever complete all as specified and as directed by Engr-in-charge.
S&F in repair door closer of cast iron body, hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701mm to 850mm wide and of weight between 36 to 60 kg, ISI marked complete all as specified and as directed by Engr-in-charge.
S&F in repair 150 mm Floor door stopper of aluminium alloy and insulation and tounge, anodised with`hard steel spring in floor complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 15mm bore brass spindle of best quality suitable for bib tap and stop cock to make the bib tap and stop cock fully functional complete all as specified and as directed by Engineer- in - Charge.
Attending the complaints of AGE B/R like fixing screws to tower bolt/Aldrop bolt/ stoppers,Handle/ Hings in respect of Easening of ( Steel/wooden/Aluminum) door/Windows of any description and size , by cleaning ,adjusting in position and making the same functional incl small repairs if reqd. with and incl greasing , oiling.complete all as specified and as directed by Engineer- in - Charge.
S&F in repair Spray jet, brass chromium plated, with and including 1.5 metre long PVC flexible reinforced pipe for EWC, for bore dia of pipe 15mm,complete all as specified and as directed by Engineer-in-Charge.
M& L GI Tubing, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors as specified and as directed by Engineer in charge.
Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed by Engineer in charge.
M& L GI Tubing , medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors as specified and as directed by Engineer in charge.
Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm as specified and as directed by Engineer in charge.
S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and as directed by Engineer-in-Charge.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 250 ltr and n exc 500 ltrs) as specified and as directed by Engineer in charge.
Dismantling Rotational Moulded plyethyelene water storage tank of capacity exc 250 lit but not exc 500 lit complete all as specified and as directed by Engineer-in-Charge.
M&L Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. (Notes : (i) The water storage tanks shall be 2 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.)
Dismantling Rotational moulded polyethylene water storage tanks of exc 500 nexc 1000 litres capacity as specified and as directed by Engineer in charge.
Ditto all as per Srl item No76 here in before but capacity of tank 1000 Litres as specified and as directed by Engineer in charge.
S&F in repair (Syphon internal fitting ) of PVC low level cistern as per existing pattern to make the PVC low level cistern fully functional complete all as specified and as directed by Engineer- in - Charge.
S & F in repair Ball valves 15 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15 mm dia and fixed complete all as specified and as directed by Engineer-in-Charge.
S&F Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm as specified and as directed by Engineer in charge.
S&F Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed in repair.of 25 mm as specified and as directed by Engineer in charge.
S&F in repair Brass chromium plated WHB mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15 mm bore complete all as specified and as directed by Engineer-in-Charge.
S&F in repair brass CP wall mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15mm bore as specified and as directed by Engineer in charge.
S&F in repair vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excluding flushing cistern and flush pipe) complete fixed in repairs as specified and as directed by Engineer in charge.
Supply and fix in repair vitreous china wash hand basin flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand etc complete fixed in repairs as specified and as directed by Engineer in charge.
S & F in repair PVC valveless syphonic action type flushing cistern, 10 ltr capacity low level , white with inlet, ball valve, float and handle including brackets fixed in repairs as specified and as directed by Engineer in charge.
S&F in repairPVC connections 15 mm size with PTMT nuts of length 450 mm as specified and as directed by Engineer in charge.
S&F 600mm long brass chromium plated towel rail fancey type as approved by Eng-in-Charge.
S&F In repair bib tap 15 mm bore, high pressure of PTMT (Minimum weight 90 Gms) colour approver by Engiineer in Charge , screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs Bib taps brass cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore GI pipe,complete all as specified and as directed by Engineer-in-Charge.
M&L in repair Bib tap 15 mm dia long body , fancy type, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed as specified and as directed by Engineer in charge.
M&L in repair Gate valve, 25 mm dia, fancy type, Chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs.
M&L in repairPillar taps, 15mm dia, Chromium plated fancy type, Swan neck , cast copper alloy with capstan heads, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe and fixedas specified and as directed by Engineer in charge.
M&L in repair Brass chromium plated shower rose 125 mm size including fixing to steel pipe or union fixed as directed by Engineer in charge .
S&F in repair PTMT mirror cabinet of size 600x450 mm complete all as specified and as directed by Engineer in charge.
S& F in repair Plastic water closet seat, any colour , closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as directed by Engineer in charge.
S&F in repair health faucet with 1 mtr silver foil connection long tube and hook and knob all as specified and directed by Engineer-in-Charge.. Cera Cat part No F8030104AB and equivalent .
S&F in repair CP toilet paper holder fancy type complete all as specified and directed by Engineer-in-charge. Cera Cat No:Cat. No. F5014109CH or equivalent
S&F in repair angle valve cast copper alloy fancy type CP with long shank and cup and screwed for 15 mm iron pipe fixed as directed by Engineer in charge. Cera cat Part No F8040204 or Equivalent
S&F PVC Waste pipe 32mm/40 mm for WHB /sink with coupling fixed in repairs as specified and as directed by Engineer in charge.
S&F grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) as specified and as directed by Engineer in charge.
M&L in repair Chromium plated soap dish complete all as specified and directed by Engineer-in-charge.
M& Lfor Rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge.
M&L for Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge.
M&L for Rendering 5mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling.as directed by engineer in charge.
M&L for preparing new surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint .over pink primer as directed by engineer in charge.
preparing new surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide as directed by engineer in charge.
M&L for Preparing old decorated surfaces of wall and applying one coat of white wash as directed by engineer in charge.
All as per item No 109 above but on ceiling as directed by engineer in charge.
M&L Preparing the old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint as directed by engineer in charge.
All as per item No 111 above but on steel surfaces as directed by engineer in charge.
M & L for preparation of old surfaces by complete removal of existing treatment of painted wall incl pillar etc by mechanical equipment like electric wall sander and applying white wall care putty for filling the undulations as required and finished with two coat of oil bound distemper white/ tinted with roller complete all as specified and as directed by Engr-in-Charge.
M&L for Preparing of old decorated surfaces of wall and applying one coat of distemper oil emuision with roller including applying white wall care putty for filling the undulations as required as directed by engineer in charge.
M&L, for Preparing surfaces of plaster or unplaster new and applying three coat of white wash on ceiling as directed by engineer in charge.
M&L for Preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer with roller , white or tinted complete all as specified and as directed by Engineer-in-Charge.
M & L for preparation of old surfaces by complete removal of existing treatment of painted wall incl pillar etc by mechanical equipment like electric wall sander and applying two coat of exterior emulsion/ weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks with roller all as specified in manufacturers instruction Make STP Ltd (Shallcry-215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) all as specified and directed by GE.
M & L for preparation of New surfaces applying two coat of exterior emulsion/ weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks with roller all as specified in manufacturers instruction Make STP Ltd (Shallcry-215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) all as specified and directed by GE.
M & L for preparation of New surfaces applying two coat of cement based paint of first quality by using over a coat of primer incl sealing the cracks with roller all as specified in manufacturers instruction all as specified and directed by Engineer in charge.
Dismantling structural steel work including door gates but excluding framed truss etc
S&F MS framed work as steel gates, chowkhats and other similar work of angle or other section with gusset plates rails, braces etc complete driling for fixing of steel sheeting or other covering etc, confirming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparing of old decorated surfaces of ceiling and applying one coat of distemper oil emuision as specified and as directed by Engineer in charge.
Providing and fixing in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any thickness in each pane for metal frames complete all as specified and as directed by Engineer in charge.
S&F in repair 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any thickness in each pane for metal frames complete as specified and as directed by Engineer in charge.
Dismantling of Roof tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Demolition of lime concrete of any description over roof slab complete all as specified and as directed by Engineer-in-Charge..
M&L for 10 mm thick Rendering in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns( WPC to be measured separately as supply only)
S&F for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg per sq m including cleaning surfaces complete all as specified and as directed by Engineer-in-Charge
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified
M&L Lime concrete terracing as in roof complete all as specified and as directed by Engineer-in-Charge.NOTE:- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used.
M&L 40 mm thick brick tiles bedded on 10mm thick CM 1:6 and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per Srl item No 132 but except tiles complete all as specified and as directed by Engineer-in-Charge.
M& L for cement mortar 1:3 for raking out joints/ pointing to brick tiles laid flat in roofs and flush pointing tiles 30 cm by 15 cm tiles laid flat in 1:3 cement mortar as specified by engineer in charge
S&F in repair towel ring with material brass with glossy finish with fitting all as specified and as directed by engineer in charge. Cera Cat. No. F5015115CH or equivalent
S&F in repair glass shelf 500 mmx60 mm with ABC brackets (450x125x6 mm) all as specified and as directedby Engr-in- charge.
Dismantling of stone slab and tiles of any description or thickness in floor, apron etc laid bedded and pointed in any mortar as directed and specified by engineer in charge.
Supply only liquid integral water proofing compound ISI Marked complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement Vitreous china squatting pan of orissa pattern, white of size 580x440mm with integral foot rest and P or S trap in cluding provision of lime concrete bedding min 150mm thick (1:2:5) inc taking out old WC complete.
S&F Plastic seat cover lid only for PVC water storage tank of capacity 500 Ltrs (sample as approved by EIC) complete with locking arrangement & hinges complete all as specified and as directed by Engr-in-charge.
Demolition of brick work built in cement mortar including all quions arches pillars etc
M&L for Fly ash Brick work with sub class ‘B’ old burnt brick , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete.
M&L Hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface as specified and as directed by Engineer in charge.
SUBHAM ENTERPRISES
vikas builders
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .