Comprehensive maintenance and repairs of BR and EM services at CIJW School Vairengte under GE Silchar

Amount

B/R WORKS

Taking down chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frame) and disposing off

Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4sqm each but with shutters (without taking off shutters from the frame) and disposing off

Taking down wooden shutters of size not exceeding 1.0sqm and disposing off complete all as specified and directed

Taking down wooden shutters of size exceeding 1.0sqm but not exceeding 2.0sqm and disposing off complete all as specified and directed

Taking down wooden shutters of size not exceeding 1.0sqm and refixing in same opening after minor repairs, easing out, etc. complete all as specified and directed

Taking down wooden shutters of size exceeding 1.0sqm but not exceeding 2.0sqm and refixing in same opening after minor repairs, easing out, etc. complete all as specified and directed

Dismantling of timber scantling 40sqcm and over in section, in any position in unframed works complete all as specified and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc. or insulation boards/slabs/blankets, any thickness including cover fillets, frameworks, etc. complete all as specified and as directed

Dismantling boarding any description fixed in any position with nails complete all as specified and as directed

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed

Taking down cement or cement/lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed

Demolition of reed, lathing, single or double including battens and plaster or chiken wire lathing complete all as specified and as directed

Taking up or down 15mm bore steel water tubing and connections from any location / position including disposing off, etc. complete all as specified and as directed

Taking up or down 20mm bore steel water tubing and connections from any location / position including disposing off, etc. complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius as in half brick thick walls built in CM (1:4) complete all as specified and as directed

M&L for for 15mm thick rendering in cement mortar (1:4) on one side of lathing, surface finished even and smooth without using extra cement complete all as specified and as directed

M&L for for 10mm thick rendering in cement mortar (1:6) on other side of lathing, surface finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 15mm thick, in cement mortar (1:6) on brick masonry or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed

M&L rendering 15mm thick, in cement mortar (1:4) on brick masonry or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain / printed coloured PVC sheet (as approved) reinforced with MS square tube all as per specifications and drawing given in SSR Part-I 2009 all as per manufacturer's instructions and making good the disturbed surfaces complete all as specified and as directed

S&F factory made solid panel PVC paneled door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width, stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2020) complete all as specified and as directed

S&F factory made solid PVC gauged door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width, stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2020) complete all as specified and as directed

S&F factory fabricated solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with but 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed

M&L 35mm thick factory made plain framed paneled door shutter (two panels) 2nd class HW rail and style with lock rail and panels of 12mm thick ISI marked veeneered particle board with commercial veeneering on both faces, with size of rail and style shall be as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F 35mm thick 2nd class hard wood glazed, skeleton shutters, open rebated and prepared to receive glass, gauge, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, sizes of members of shutters as specified in clause 8.20 9(b) of SSR Part-I, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., supplied and fitted to chowkats complete all as specified and as directed

S&F 30mm thick 2nd class hard wood glazed, skeleton shutters, open rebated and prepared to receive glass, gauge, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, sizes of members of shutters as specified in clause 8.20 9(b) of SSR Part-I, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. supplied and fitted to chowkats complete all as specified and as directed

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, smooth finish with lipping of teak wood on edges complete all as specified and as directed

S&F alluminium anodized glazed door shutter including frame, door frame of size 50x65x1.5mm thick, door shutter with stiles of size 85x45x1.5mm thick, top and bottom rails sizes 100x43x1.5mm and lock rails size 85x43x1.5mm, upper panel glazed with 5mm thick coloured glass and lower panel provided with prelaminated particle board (cost of glass and prelaminated particle board shall be included) including cleat type aluminium handles, stainless steel hinges, lugs and suitable locking arrangements, all necessary accessorries complete all as specified and as directed

S&F 3 way sliding anodised aluminium glazed window shutter with frame with the following specifications complete all as specified and as directed. (a) Frame 50x65x1.5mm thick (b) 35x35x1.5mm Z section in stiles, rails (c) 50x35x1.5mm T section mullion (d) PVC gasket and with 4.8mm thick coloured glass pane one side mirror finished, area not exceeding 0.5sqm each with aluminium handles and necessary locking arangements (e) Stainless steel wire mesh for mosquito proofing arrangement all as directed

S&F 2 way sliding anodized aluminium glazed ventilator shutter with frame consists of following specification complete all as specified and as directed: (a) Ventilator frame 2 track of size 60x25x1.5mm thick (b) Stiles and rails of size 35x25x1.5mm (c) 35x35x1.5mm T section mullion (d) PVC gasket with 4mm thick tinted glass, including aluminium handles with necessary locking arrangement

Notes for item Nos. 32 & 33: (a) Area of opening shall only be considered for meaurement purposes (b) All necessary accessories including tinted glass, PLPB, fittings, fixtures for assembling / fixing as per drawing complete shall be included in the quoted rate

M&L for 2nd class hard wood timber scantling wrought in section, timber framed & fixed complete all as specified and as directed

M&L for 2nd class hard wood timber scantling clean sawn in section, timber framed & fixed complete all as specified and as directed

S&F GI wire netting 0.71mm dia and 25mm mesh fixed to wood or metal studding joints, etc. in walls, ceiling stanchion, beams, etc. including all laps, cutting and wastes, etc. complete all as specified and as directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

S&F 3mm thick sheet glass ordinary quality and glazing with oil putting square not exceeding 0.5sqm in each pane including hacking out old glass complete all as specified and as directed

S&F 3mm thick sheet glass ordinary quality and glazing with oil putting square not exceeding 0.5sqm in each pane complete all as specified and as directed

S&F 5mm thick sheet glass ordinary quality and glazing with oil putting square exceeding 0.5sqm in each pane including hacking out old glass and rubber packing and aluminium beading all round complete all as specified and as directed

S&F 4mm thick sheet glass ordinary quality and glazing with oil putting including hacking out old broken glass (any thickness, size quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads square not exceeding 0.5sqm in each pane complete all as specified and as directed

S&F 300mm aluminium anodised sliding door bolt with hasp and staple, bolt type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F in repairs 300mm aluminium anodised sliding door bolt with hasp and staple, bolt type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed

S&F in repairs 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed

S&F 100mm long aluminum anodised barrel tower bolt of extruded section complete all as specified and as directed

S&F in repairs 100mm long aluminum anodised barrel tower bolt of extruded section complete all as specified and as directed

S&F 100mm extruded aluminum alloy handles, cast type, anodized complete all as specified and as directed

S&F in repairs 100mm extruded aluminum alloy handles, cast type, anodized complete all as specified and as directed

S&F 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and as directed

S&F in repairs 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and as directed

S&F 150mm floor door stopper aluminium alloy body and tongue, anodized with hard drawn steel spring fixed on floor complete all as specified and as directed

S&F 100mm MS butt hinges, medium weight, cold rolled complete all as specified and as directed

S&F in repairs 100mm MS butt hinges, medium weight, cold rolled complete all as specified and as directed

S&F 75mm MS butt hinges, medium weight, cold rolled complete all as specified and as directed

S&F in repairs 75mm MS butt hinges, medium weight, cold rolled complete all as specified and as directed

S&F in repairs aluminium 4 levers mortice lock, vertical type, size 75mm complete all as specified and as directed

S&F in repairs door closer hydraulically regulated, designation No. 3 universal type of aluminium (extruded section body) of weight 61 to 80kg, suitable for door shutters of 851-1000mm in width complete all as specified and as directed

S&F in repairs 20mm dia fancy type stainless steel curtain / drapery rods, etc. with fancy type funnel at both ends of rod, wall thickness 1mm (min) complete all as specified and as directed

S&F in repairs MS chromium plated brackets, holders of approved design, type and fininsh suitable for 20mm dia curtain / drapery rods complete all as specified and as directed

M&L for 2nd class hardwood fillets square, rectangular or tringular in section clean sawn screwed with nails exceeding 6sqcm and not exceeding 13sqcm in section complete all as specified and as directed

M&L for 2nd class hardwood fillets square, rectangular or tringular in section clean sawn screwed with nails exceeding 13sqcm and not exceeding 25sqcm in section complete all as specified and as directed

M&L 2nd class hard wood beading, straight (any size) for glazed or gauzed joinery, renewed, including mitres, etc. inlcuding taking off old beads and disposing off complete all as specified and as directed

M&L pieces of 2nd class hard wood, small let in for making good where hinges, etc. have been removed from chowkhats or frames, joinery, etc. including painting or oiling to match the existing complete all as specified and as directed

S&F solid PVC wall lining consisting of 5mm thick plain coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as shown on drawing complete all as specified and as directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and as shown on drawing complete all as specified and as directed

S&F 4mm thick asbestos cement plain building boards, fixed to timber framework with screws complete all as specified and as directed

S&F 4mm thick non-asbestos fibre cement building boards fixed or laid or inserted to timber/GI/aluminium framework with screws, fixed in ceiling flat or sloping complete all as specified and as directed

M&L for suspended false ceiling using E-grid 2430, 180GSM (exposed ceiling suspension system) as per IS-14862, of grid size 600x600mm with main runner 38x24mm and wall angle 24x24mm using 4mm thick high pressure stean crude non-asbestos fiber cement plain board in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning vents, diffuser and ducts, sprinkler, smoke detectors, etc., main runners secured to structural soffits by hanger @1220mm maximum c/c and the last hanger at the end of each main runner placed at more than 450mm from the adjucent wall, flush fitting 1220mm cross tee interlocked between main runners @610mm c/c forming 600x600mm grid and painting with two coats of acrylic emulsion paint (of approved shade) over a coat of cement primer before installing it on the grid complete all as specified and as directed

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and as directed

M&L preparation of newly plastered / unplastered surfaces and applying two coats of oil bound distemper over a coat of wall prmer on walls, etc. complete all as specified and as directed

M&L for preparing of new wood / wood based surfaces of any description not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, tint as approved complete all as specified and as directed

M&L for preparing of new wood / wood based surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, tint as approved complete all as specified and as directed

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistant, dirt resistant, exterior paint of approved shade (company depot tinted) with silicon additives @1.43litre/10sqm over and including a priming coat of exterior primer applied @0.90 litre/10sqm over new surfaces of brickwork,concrete, etc. including all necessary staging, scaffolding, etc.required complete all as specified as as directed

S&F bitumen based water proofing tape reinforced with polyester film below aluminium film having 95mm width and minimum thickness of 1.5mm laid on roof surfaces by forced application including cleaning and preparation of surfaces complete all as specified and as directed

Supply and lay bitumen based water proofing film reinforced with PVC film having minimum thickness of 0.6mm laid on roof surfaces by forced application including cleaning and preparation of surfaces complete all as specified and as directed

Fixing only steel water tubing, medium grade, galvanised with screwed and socketed joints, including supply and fixing all fittings, ISI marked conforming to IS-1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed for the following bores: Notes: (a) Serviceable tubings obtained from dismantling herein before will be reused under this item (b) Tubings shall be thoroughly cleaned off from dirt, mud, silt, rust, etc., duly de-scaled and threaded before reuse

15mm bore

20mm bore

S&F steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed of the following bores:

15mm bore

20mm bore

S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed

S&F in repairs 15mm dia bib taps, fancy type, chromium plated cast copper alloy with long flange, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm dia bib taps, PTMT, weighing minimum 90gm, any colour, fixed to iron pipe complete all as specified and as directed

S&F 15mm dia pillar taps, fancy type, chromium plated cast copper alloy, with capstain heads, screwed down, high pressure, with or without lettered 'HOT'/'COLD', with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed

S&F in repairs 15mm dia angle stop cock, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm dia angle valves, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, long shank, concealed type, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed

S&F in repairs for 15mm bore brass CP basin mixer, fancy type, of approved design, for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed

S&F in repairs 15mm PVC connections, 450mm long with brass couplings, PTMT nuts, etc. complete all as specified and as directed

S&F in repairs 32mm waste fitting, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed

S&F in repairs 100mm dia grating, brass crhomium plated with waste hole complete all as specified and as directed

S&F in repairs 125mm dia grating, brass chromium plated, with waste hole complete all as specified and as directed

S&F in repairs 150mm dia grating, brass chromium plated, with waste hole complete all as specified and as directed

S&F in repairs tubular towel rail, 20mm dia, brass chromium plated, D type, 1000mm long (distance between flanges) fixed with stainless steel screws and wooden/rawl plugs complete all as specified and as directed

S&F soap dish, brass chromium plated, 160x160x90mm (minimum), of approved design, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed

S&F in repairs toilet paper holder with flap, 6'' wide, brass chromium plated, of approved deisgn and finish and fixed with steel screws and wooden/rawl plugs complete all as specified and as directed

S&F 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45o with flange of CP brass of approved design and pattern complete all as specified and as directed

S&F health faucet, 15mm bore, brass head chromium plated, telephone type, with CP arms, flexible pipe (ABS body) with 1.2m long stainless steel flexible braided hose tube and wall hook of approved finish complete all as specified and as directed

S&F in repairs corner shelf, with 6mm thick plain glass and stainless steel rail, of size 300mm fixed with stainless steel screws in each bracket and wooden/plastic cleats complete all as specified

S&F in repairs gun metal globe or gate valve, 15mm dia with iron wheel head, screwed both ends for iron pipe and fixed including necessary cutting into existing pipe, threading, inserting new piece of GI pipe of existing size, breaking/cutting into cement concrete, masonry, etc. and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs gun metal globe or gate valve, 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed including necessary cutting into existing pipe, threading, inserting new piece of GI pipe of existing size, breaking/cutting into cement concrete, masonry, etc. and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs single piece vitreous China wash down water closet pan (Pedestal pattern), white, with 'P' or 'S' trap, including flush pipe, trap, connection to drain or outgoing pipe, anti-syphonic pipe, seat cover, closed pattern with flat bottom & cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and as directed Make: Cat part No. 20125 of Hindware or equivalent of Kohler, Duravit, Grohe, Roca, Jaquar

S&F in repairs vitreous China urinal, bowl type urinal, half stall, flat back, of size 465x355x265mm white, with grating and union for discharge pipe (back or corner wall type), including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed

S&F in repairs wash hand basin, vitreous China, coloured, flat back type, of size 630x450mm, including CI brackets, cutting for and pinning in ends of brackets with coupling and including PVC connection 60cm key with brass union complete all as specified and as directed

S&F 10litres capacity PVC flushing tank, white / coloured, syphonic action type, low level, valveless, with PVC inlet ball valve, PVC flush pipe, float and suitable sized brackets including cutting of floor / wall and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing and taking down of old PVC flush tank and disposing off complete all as specified and as directed

E/M WORKS

Taking down copper / aluminium point wiring (light, fan, socket or power) including fixture and fittings viz. switches, ceiling roses, light fittings, pendants, regulators, sockets, etc. and disposing off complete all as specified and as directed

M&L for point wiring with 1.5sqmm, two single core, FRLS PVC insulated, ISI-694 marked, unsheathed cable 1100V grade with multi-stranded copper conductor, drawn through and including non-metallic PVC conduit not less than 20mm dia and accessories concealed in walls, ceiling etc. and including MS sunken box with cover plate, provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly, etc. complete all as specified and as directed for the following:

One light point controlled by one 5A one way switch

One ceiling fan / exhaust fan point controlled by one 5A one way switch

One switch socket outlet 3 pin 5A controlled by one switch on independent board

One switch socket outlet 3 pin 5A controlled by one switch on same board

M&L for point wiring with 2.5sqmm, two single core, FRLS PVC insulated, ISI-694 marked, unsheathed cable 1100V grade with multi-stranded copper conductor, drawn through and including non-metallic PVC conduit not less than 20mm dia and accessories concealed in walls, ceiling etc. and including provision of 2.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly, including MS sunken box, etc. complete all as specified and as directed for one switch socket combination outlet 3 pin 15A multipurpose complete all as specified and as directed

M&L for point wiring with 1.5sqmm, two single core, FRLS PVC insulated, ISI-694 marked, unsheathed cable 1100V grade with multi-stranded copper conductor, drawn through and including non-metallic PVC casing caping not less than 20mm wide and accessories surface on walls, ceiling etc. and including surface box with cover plate, provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly, etc. complete all as specified and as directed for the following:

One light point controlled by one 5A one way switch

One ceiling fan / exhaust fan point controlled by one 5A one way switch

One switch socket outlet 3 pin 5A controlled by one switch on independent board

One switch socket outlet 3 pin 5A controlled by one switch on same board

M&L for point wiring with 2.5sqmm, two single core, FRLS PVC insulated, ISI-694 marked, unsheathed cable 1100V grade with multi-stranded copper conductor, drawn through and including non-metallic PVC casing capping not less than 20mm wide and accessories surface on walls, ceiling etc. and including provision of 2.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly, including surface box, etc. complete all as specified and as directed for one switch socket combination outlet 3 pin 15A multipurpose complete all as specified and as directed

S&F ceiling rose surface bakelite 65x50mm, ISI marked, with three terminals complete all as specified and as directed

S&F switch piano flush button type, single pole, ISI marked, one way 5A, 230V complete all as specified and as directed

S&F switch socket combination outlet, 2 in 1, 5 & 15A flush type, universal, ISI marked, 230V complete all as specified and as directed

S&F switch socket combination outlet, 5 in 1, 5 & 16A flush type, universal, ISI marked, 240V complete all as specified and as directed

S&F electronic fan regulator, electronic stepped type (5 steps), 100W, 50Hz, 240V, ISI marked complete all as specified and as directed

S&F electronic fan regulator, electronic dimmer type, 100W, 50Hz, 240V, ISI marked complete all as specified and as directed

S&F PVC / polycarbonate lamp holder, insulated body, bracket holder / angle holder with back plate 240V complete all as specified and as directed

S&F bell buzzer, ding dong type, 230V, single pole, 50Hz, AC complete all as specified and as directed

S&F bell push flush type, single pole, ISI marked, one way 5A, AC 230V complete all as specified and as directed

S&F switch piano flush modular type, single pole, ISI marked, one way 6A, 1 module, 230V complete all as specified and as directed

S&F switch piano flush modular type, single pole, ISI marked, one way 16A, 1 module, 230V complete all as specified and as directed

S&F socket outlet, 2/3 pin, 6A modular type, ISI marked, combined 2 module, 230V complete all as specified and as directed

S&F socket outlet, 5 pin, 6/16A modular type, ISI marked, 2 module, 230V complete all as specified and as directed

S&F electronic fan regulator, modular type, stepped type (5 steps), 100W, 230V, 2 module, ISI marked duly connected up complete all as specified and as directed

S&F in repairs modular white cover plate with frame ISI marked complete all as specified and as directed suitable of the following modules:

2 modules

4 modules

6 modules

M&L for taking down carefully ceiling fans, 1200/1400mm sweep from any position / location, rewinding with super enameled copper winding wire of same gauge, including insulating, varnishing, baking, etc., cleaning the fans, greasing moving parts, replacing rubber reel, split pins, check nuts, PVC connectors, etc. refixing the fan in position by providing nuts / bolts as required, replacing old worn out connecting cable with 3core 1.5sqmm, 1.5m long from fan to ceiling rose, testing fans for workability and cleaning off the premises complete all as specified and as directed

M&L for disconnecting and taking down exhaust fans/wall mounted fans 300/380/400mm, from any location / position, removing old worn out paint from fan and blades by rubbing with suitable emery paper, etc. and spray painting with two coats of synthetic enamel paint (tint as approved) and writing MES number of fans (tint as approved and in suitable sized font) in body of fan, refixing fan in old/new position, connecting up and cleaning off the premises complete all as specified and as directed

M&L for disconnecting and taking down ceiling fans 1200/1400mm, from any location / position, removing old worn out paint from fan and blades by rubbing with suitable emery paper, etc. and spray painting with two coats of synthetic enamel paint (tint as approved) and writing MES number of fans (tint as approved and in suitable sized font) in body of fan, refixing fan in old/new position, connecting up and cleaning off the premises complete all as specified and as directed

S&F in repairs fan capaitors 2.5MFD complete all as specified and as directed

S&F fan hook fabricated in MS flat iron 40x6mm 300mm long, bent to shape with drilled holes to accommodate nuts suitable for hanging ceiling fans, entirely painted with two coats of synthetic enamel paint complete all as specified and as directed

S&F heavy duty, PVC body with PVC blades, legs, ISI marked energy efficient, 240V exhaust fan, 250mm sweep with lauvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including grouting the nuts and bolts including taking down old / unserviceable fan any type and disposing off complete all as specified and as directed

S&F MCB SP, 240V, 6 to 40A, 10kA, 50Hz, C curve, complete all as specified and as directed

S&F MCB SPN, 240V, 32 to 40A, 10kA, 50Hz, C curve, complete all as specified and as directed

S&F MCB TPN, 415V, 63A, 16kA, 50Hz, B curve, complete all as specified and as directed

S&F metal clad socket outlet with single pole enclosure with 5 pin and earth plug socket including 1No. MCB SP 10A 10kA 240V and taking down and disposing off old/unserviceable socket complete all as specified and as directed

S&F powder coated CRCA sheet metal enclosures for 8 way MCB DB, 240V, SPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces including taking down of old enclosure and disposing off complete all as specified and as directed

S&F powder coated CRCA sheet metal enclosures for 4 way MCB DB, 415V, TPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces including taking down of old enclosure and disposing off complete all as specified and as directed

S&F powder coated CRCA sheet metal enclosures for 4 way MCB DB, 240V, SPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces including taking down of old enclosure and disposing off complete all as specified and as directed

S&F powder coated CRCA sheet metal enclosures for 2 way MCB DB, 240V, SPN, double door, IP 43 protection class conforming to relevant IS, with neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces including taking down of old enclosure and disposing off complete all as specified and as directed

S&F 1100V grade heavy duty PVC insulated aluminium multistranded conductor cable, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1m apart including 4mm suspension wire, two twin core cable flat or circular including taking down old unserviceable wire and disposing off complete all as specified and as directed of the following sizes:

S&F surface mounted compact 20W LED tube light fitting box type, 230V, 2' long, single side connection, all accessories pre-wired internally, with 20W LED tube rod nd connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose including taking down and disposing off old fitting complete all as specified and as directed

S&F 25W post-top lantern, opal light fitting, IP-65, new generation, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source including taking down old / unserviceable fitting and disposing off complete all as specified and as directed

S&F in repairs bulk head fitting LED, 10W, with pressure die cast housing, acrylic diffuser with frame and connecting accessories and connecting up complete all as specified and as directed

S&F in repairs panel down lights, 1x15W, aesthetically designed, 1x1' recess LED flat panel, with high bright LED for glare free homogeneous illumination with all connecting accessories and connecting up complete all as specified and as directed

S&F recess/surface mounting LED flat panel 2'x2' luminaire with high efficient LED & glare free full window opal diffuser of 36W, input voltage 90-300V, PF 0.95, CRI> 70, L 80 with drivers and all accessories pre-wired and connecting up with twin core twisted flexible copper conductor cable of suitable size and taking down and disposing off old fitting complete all as specified and as directed

S&F in repairs recess mounting 15W LED light fitting, pressure die cast alminium housing powder coated white, with drop down PC diffuser, optimized heat sink, efficient heat dissipation, replaceable electronic driver and all connecting accessories and connecting up complete all as specified and as directed

S&F in repairs recess mounting 10W LED light fitting, pressure die cast alminium housing powder coated white, with drop down PC diffuser, optimized heat sink, efficient heat dissipation, replaceable electronic driver and all connecting accessories and connecting up complete all as specified and as directed

S&F LED driver suitable for 2x2' recessed mounting LED fitting complete all as specified and as directed

S&F LED bulb 10W, 5 star rated, and connecting to lamp holder complete all as specified and as directed

S&F LED bulb 7W, 5 star rated, and connecting to lamp holder complete all as specified and as directed

S&F LED tube rods, 20W, single side connection, 5 star rated, 4' long and connecting to battens complete all as specified and as directed

S&F in repairs modular starter switch 2 module 20A suitable for AC units as per site complete all as specified and as directed

S&F in repairs PVC insulated single core copper conductor 1.5sqmm FRLS with life guard compound complete all as specified and as directed

S&F in repairs PVC insulated single core copper conductor 2.5sqmm FRLS with life guard compound complete all as specified and as directed

S&F in repairs PVC insulated single core copper conductor 4sqmm FRLS with life guard compound complete all as specified and as directed

S&F in repairs PVC insulated single core flexible copper wire 0.75sqmm FR grade complete all as specified and as directed

S&F PVC rectangular block for mounting switches, sockets, regulators, etc. with 3mm thick plastic laminated sheet cover complete all as specified and directed of following sizes:

100x100mm and 50mm deep

175x100mm and 50mm deep

200x150mm and 50mm deep

250x200mm and 50mm deep

M&L for taking down carefully geysers of any capacity any make after disconnecting electric & water connections for carrying out repairs by replacing worn out / damaged parts / components, cleaning the inner tan with descaling agents and preparing of surfaces viz. scrapping old paints, smoothening, etc. and painting with two coats of synthetic enamel paint (white tint) and refixing the same to original place and re-connecting electric & water supply lines complete all as specified and as directed Note: Replaced parts / components shall be measured under respective items hereunder

Supply only PVC flexible braided connecting pipe suitable for hot/cold water supply 450mm long with brass end plugs

Supply only thermostat switches of geyser 25litres capacity

Supply only heating element 2kW ISI marked triangular / round base mounting

Taking down old unserviceable submain wiring of any type, any size, from any location or position and disposing off including making god the disturbed surfaces, etc. complete all as specified and as directed

M&L for submain wring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 6sqmm and 1 run of 6sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC casing capping 20mm wide, heavy duty, ISI marked surface on wall/ceiling/roof, etc. with all required accessories complete all as specified and as directed

M&L for submain wring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 4sqmm and 1 run of 4sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC casing capping 20mm wide, heavy duty, ISI marked surface on wall/ceiling/roof, etc. with all required accessories complete all as specified and as directed

Notes for item Nos. 185 & 186: (i) 2 runs of 4/6sqmm main cable, 1 run of earth conductors and 1 run of PVC casings per item shall be measured as one length (ii) Separate casing shall be used for each sub-main wiring circuit irrespective of numbers of wire (iii) The minimum size of casing shall be as stipulated, however higher sizes shall be used as per number of cables passing through. The Engineer-in-charge shall ensure for proper size of conduit / casing as per requirement at site

M/S. N.A.BARBHUIYA (BID ID -3096877)

Bhuiya Construction (BID ID -3097502)

M/S R A ENTERPRISE (BID ID -3096940)

m/s builders and suppliers (BID ID -3098496)

NAGALAND AGENCIES CO (BID ID -3099023)

M/S LUIT CONSTRUCTION (BID ID -3096908)

M/S TAPAN KUMAR RAY (BID ID -3096842)

M/S SANJIB DEB (BID ID -3098582)