WORKS

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

FABRICATION & ERECTION FROM OLD ANGLE - Making Angle frame for concertina coil 600 mm dia , by using old MS angle, fabrication, erection on the approximate 3.5-meter heighted boundary wall Note- old angle will provide by HCL/TCP free of cost and rest materials like tools, tackles, welding rod, welding machine, cutting machine, material, manpower , erection etc to be done/provide by the contractor for completing of job in all respect- 100 no QTY approximate (qty may be increase /decrease as per site requirement) ,with prime coat on the frame

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required-making frame for 600 mm dia concertina coil

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

White washing with lime to give an even shade : 13.87.1 Old work (two or more coats) including surface cleaning, prepartion surface & painting , complete in all respect

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : 13.90.1 Old work (one or more coats) including surface cleaning, preparation with lambi/pop and smooth painting , complete in all respect

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m/3.5m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. Meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand)