Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC 2 LOCKHART ROAD NEAR PCDA P OFFICE PRAYAGRAJ U P PIN 211014 | PRAYAGRAJ | UTTAR PRADESH | 211014 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹42.2 L+₹7.0 L (19.8%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹46.1 L+₹10.9 L (31.0%)Rejected-Finance | L3 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | M/S Garg Sons L2 | Technological Associates L3 | Jahanvi enterprises L1 |
|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed. | 36 | Each | 125 ₹4,500 | 200 ₹7,200 | 100 ₹3,600 Lowest |
| 2.00 | Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. | 34 | Each | 150 ₹5,100 | 230 ₹7,820 | 125 ₹4,250 Lowest |
| 3.00 | S&F for Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. | 60 | RM | 650 ₹39,000 | 360 ₹21,600 Lowest | 400 ₹24,000 |
| 4.00 | S&F for Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. | 100 | RM | 600 ₹60,000 | 340 ₹34,000 Lowest | 380 ₹38,000 |
| 5.00 | M&L for Solid PVC Frame for door,kitchen cabinet,cupboard of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. | 40 | RM | 350 ₹14,000 Lowest | 400 ₹16,000 | 360 ₹14,400 |
| 6.00 | S&F Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. | 26.4 | Sqm | 2,200 ₹58,080 | 2,100 ₹55,440 | 1,800 ₹47,520 Lowest |
| 7.00 | S&F Second class hardwood Flush shutters 35mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. | 61.6 | Sqm | 2,000 ₹1,23,200 | 1,850 ₹1,13,960 | 1,450 ₹89,320 Lowest |
| 8.00 | S&F Factory made solid panel PVC door shutter 30 mm thick (style)both side prelam pvc sheet of decortive choice consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed. | 15.2 | Sqm | 2,200 ₹33,440 | 2,100 ₹31,920 Lowest | 2,500 ₹38,000 |
| 9.00 | M&L in repair Aluminium (powder coated) sliding glazed shutter of suitable size of 3 lane with necessary joining cleats, glazing clips, rubber gasket, aluminium snap beading and locking arrangement at both end all as specified and as shown and drawing.
Notes : (i)Quotated rate inclusive of Frame and Glass filling in panels to windows
(ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron
(iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE.
(iv) Aluminium section shall be as per drg. No. CE/ALD/TD-194 sheet No. 1/2 & 2/2 | 30 | Sqm | 4,800 ₹1,44,000 | 5,500 ₹1,65,000 | 4,000 ₹1,20,000 Lowest |
| 10.00 | S&F for powder coating aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. (minimum thickness of powder coating 50 micron). | 10 | Kg | 650 ₹6,500 Lowest | 725 ₹7,250 | 650 ₹6,500 Lowest |
Tender Value
₹49.8 L
EMD Value
₹99,500
Closing Date
18 Oct 2025, 6:00 pmClosed
GE WEST PRAYAGRAJ
Garrison Engineer (West), New Canttt, Prayagraj-211001
SPECIAL REPAIR TO OR MD ACCN NO P-610 TO P-613 (MH QTRS) AT VD ROAD AND PROVN OF 05 X SPLIT AC (2 TON), 45 X GEYSERS AND 34 X EXHAUST FANS WITH CONNECTED ITEMS AT VARIOUS UNITS OF NEW CANTT PRAYAGRAJ
2025_MES_732949_1
8864/E8
Open Tender
Civil Works
Item Rate
180 days
NEW CANTT PRAYAGRAJ
As per Tender Documents
7 documents required · 7 mandatory
₹500
GE WEST PRAYAGRAJ
₹99,500
Yes
19 Dec 2025
27 Sept 2025
25 Oct 2025
27 Sept 2025
18 Oct 2025
11 Oct 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.10 MB
TenderDocuments8864.pdf
Tender Documents • 0.90 MB
BOQ_820662.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .