SPL REP WKS TO BLDG NO P 10 02 AND S 13 AT 11 COMPO PL, PROVN OF RECREATION HALL FOR 2 9 GR AND PROVN OF MT FOL STORE AT 11 PARA UNDER GE 859 EWS

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil.

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in soft/loose soil.

Returning/filling in including spreading, levelling, watering and well remming in layers n.exc 25 cm in soft/loose soil.

M&L foe Sand filling under floors or in foundations including watering and consolidation in FOL store complete all as specified and directed

Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point.

M&L for Hardcore of gauge n exc. 63 mm, with broken stone/ boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

Material and labour for providing cement concrete 1:2:4 type B-1 using 20 mm graded aggregate ) in plinth walls or retaining walls,drain walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)

M&L for cement concrete type D-2, 1:4:8 in Cement concrete (40 mm graded aggregate ) in foundations, filling and mass concrete.

M&L for Cement concrete type B-2, 1:2:4 (using 40 mm graded agg) as in surface channels and drains complete all as specified and directed.

M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete.

M&L for RCC Nominal Mix type B-1, 1:2:4 (using 20mm graded stone agg) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.

M&L for RCC Nominal Mix Type B-1, 1:2:4, (using 20mm graded stone agg) as in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L for RCC Nominal Mix Type B-1, 1:2:4, (using 20mm graded stone agg) as in Columns, pillars, piers, posts and struts complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc

Supply only of Liquid water proofing compound for exteenal plastering complete all as specified and directed by engr in charge

Use & Waste of flat Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed

Use & Waste of flat Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Use & Waste of flat Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed complete all as specified and directed

M& L for cleansawn Second class hard-wood scantlings with framed work.

Material & labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area not exc. 3 sqcm complete all as specified and directed

S&F 2nd class Hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats.

S&F 2nd class HW 30mm thick Glazed and skeleton shutters, divided into squared, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats.

S& F for 30mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.

S&F 125 mm long aluminium anodized, barrel tower bolts extruded section.

S&F 125 mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

Ditto, itm no 29, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240

S&F 4mm Non Asbestos fibre cement bldg boards fixed or laid/inserted to GI/Aluminium framework with screws designer type as in false ceiling with & incl aluminium snap grid of size and fixed with hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia ,40mm long complete all as specified with allconnected accessories, fittings and fixtures complete all as specified and directed.

S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete, all as specified and directed.

S & F 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F of for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply and fixed 6 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to walls surface etc complete all as specified and directed.

Supply and fixed 4 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed.

M&L for 75mm thick Pcc type C-2, 1:3:6 (using 40mm graded stone agg) as in plinth protection complete all as specified and directed.

M&L for plain cement concrete 75mm thick type C-2, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement.

M&L for PCC 100mm thick, type D-2, 1:4:8 (using 40mm graded stone agg) in floors and pavings etc. complete all as specified and directed

M&L for PCC 40 mm thick, type B-1, 1:2:4 (using 20mm graded stone agg) in floors and pavings etc. and finishing surfaces even and smooth with out using extra cement complete all as specified and directed

M&L for 25mm thick Pcc type B-0, 1:2:4 (using 12.5 mm graded stone agg) as in floors and pavings complete all as specified and directed.

M&L for Glass dividing strips, 3 mm thick 38mm wide for constraction and expension joints complete all as specified and directed

M&L for First Quality, Glazed ceramic coloured tiles 450mm x 300mm x 7mm thick, in vertical surface such in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles complete & rendering 10 mm thick in cement mortar 1:4 on brick walls for laying tiles complete all as specified and directed by Engr-in-charge.

M&L for joint free Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Note: colour and pattern of tile will be decided by GE/ Engr-in-charge. Contractor will brought the tiles only after approval of colour and pattern by GE/Engr-in-charge).

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 complete all as specified.

M&L rendering 10 mm thick in CM 1:6 on concrete inner surfaces of wall finished even and smooth without using extra cement .

M&L rendering mixed with liquid wpc by 0.4% of cement weight 15mm thick in CM 1:4 on concrete outer surfaces finished even and smooth without using extra cement .

M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:6 for laying floor tiles etc all as specified.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified.

M&L for Prepairing surfaces plastered or unplastered newly surfaces with two coats of cement base paint over Primimg coat complete all as specified and directed by engr in charge

M&L for preparing plastered or unplasterd newly surface of any description with three coat of white wash on walls surfaces.

M&L for preparing plastered or unplasterd old surface of any description with two coat of white wash on walls surfaces.

Supply and fix of sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed.

Material and labour for new plywood and wood based material surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for newly steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Material and labour for preparing new galvanised surfaces to receive painting by coating with mordent solution including washing and cleaning and applying two coats of anticorrosive roof paint over a coat of red oxide primer over 10 cm width or girth on steel surface .

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground levelr all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed.

Dismantling Timber scantling with framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq cm in section , in any position all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed

Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed.

Use and waste flat form work to vertical faces of drain/retaining wall and similar work .

Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete, all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) not exc 1.50 Sqm each including iron mongeries complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed.

Supply & fix Aluminium anodised barrel tower bolt 100 mm long of extruded section etc complete all as specified and directed.

Supply & fix Aluminium anodised barrel tower bolt 150 mm long of extruded section etc complete all as specified and directed.

Supply & fix aluminium alloy, anodised, sliding door bolts 250mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed.

Supply and fix MS butt hinges medium weight, cold rolled 100mm size complete all as specified and directed.

Supply and fix MS butt hinges medium weight, cold rolled 75mm size complete all as specified and directed.

Supply & fix Extruded Aluminium anodised alloy handles fabricated type 100mm long complete all as specified and directed.

Supply & fix Extruded Aluminium anodised alloy handles fabricated type 150mm long complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M/L for point wiring in casing caping with 1.5sq mm FRLS PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl casing caping with its accessories and PVC Boxes for fixing switches/sockets etc for the following: One light/fan point controlled by one No piano type switch 5 Amps single pole one way

One socket outlet 5/3 pin 6 AMPS controlled by one switch on the same board.

One socket outlet 5/3 pin 6 AMPS controlled by one switch on independent board.

All as per item No 2 above but 3 pin socket out let 15/16 Amps on the independent Board all as spfd with single core unsheathed PVC insulated cable multistranded copper conductor of size 2.5 sq mm for phase & neutral & 2.5 sq mm for earth continuity conductor.

S&F Switch Piano Flush button single pole one way 5/6 Amp.

S&F Switch Piano Flush button single pole one way 15/16 Amp.

S & Fixing in replacement of Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V

Supply and fixing LED light fitting 2x8 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 15W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size.

Supply and fixing MCB 32 Amp SPN 240V, 10KA 'C' curve complete with connection testing and commissioning all as directed and as specified.

S&F socket outlet 2 in 1, 3 pin & 2 pin, 5/6 Amp, 240 volt.

S&F socket outlet 2 in 1 , 3 pin & 2 pin, 5/6 Amp and 15/16 Amp, 240 volt.

S&F ceiling rose surface bakelite 65mmx50mm 100watt three terminal.

S&F Lamp hoder/Batten holder PVC/Polycarbonate insulated body with metal ring and back plate for batten fitting.

S&F LED Lamp 9W B22 Type all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty 10 Sqmm cable PVC insulated aluminium stranded conductor , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular

S&F sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door (Metallic) type including taking down old Distribution Board and MCBs all as specified and directed .

S&F MCB SPN 40 Amps 240 volts 'C' series, 10 KA, 50 Hz. Make:- As approved Make of DB

S&F MCB SP 5 to 32 Amps 240 volts 'C' series, 10 KA, 50 Hz including connection in the DB and testing/commissioning. Make:- As approved Make of DB

Supply and fixing decorative ultra slim round profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient battend light fittting 1x20w, complete tube ling fitting with connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics including taking down old unserviceable light fitting any type complete with IP 65/66 protection complete.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC ( 1:2:4) type B-1 cover slab framed with 50X30X4 mm MS angle (reinforced with 6 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing charcoal or coke and magnesium sulphate in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, copper lugs, complete in all respect., GI earth wire protected by 40 mm bore (light grade) galvanized iron pipe and other end connected to the earth bar (test point) made of MS flat (400X32X6 mm) bend in ‘D’ shape and fixed to wall by means of fast nut or bolt grouted in to wall at 1 mtr from plinth height. 4sqmm PVC insulated (colour green) copper conductor single run as earth continuity conductor along with 15 mm PVC conduit grouted in wall or fixed on wall surface to be continued up to main switch board and fix with common earth dolly as directed by EIC . Disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion including taking out old unserviceable eathing complete all as specified and as directed.

Supplying and fixing 1100 volts grade 16 Sqmm heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular.

Supply and laying or fixing or passing through pipeXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 10 sqmm 2 core including taking out old unserviceable cable any type complete all as specified and directed by Engineer in charge.

High density polyethylene pipes (HDPE) 50 Sqmm bore of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

BROKPA CONSTRUCTION (BID ID -3464262)

M/S L P ENTERPRISES (BID ID -3464289)

M/S N T ENTERPRISES (BID ID -3464296)

M/S PASSANG CONSTRUCTION (BID ID -3464308)

M/S PD ENTERPRISES (BID ID -3464322)

M/S TT ENTERPRISES (BID ID -3464344)

M/S TP ENTERPRISES (BID ID -3464334)