SPECIAL REPAIR TO BLDG NO WB 190 SINGLE OFFR ACCN MCTE MHOW UNDER GE MCTE MHOW

Amount

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thickness (below or above GL) as in plinth protection/path/Hard standing/floor etc. complete removal of debris outside MD land complete all as pecified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar complete all as pecified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc. complete removal of debris outside MD land complete all as pecified and directed.

Demolition of brick work or PCC solid block or stone/boulder masonry built in cement mortar.

Taking down chowkats or frames with shutters (with out taking off shutters and grills from the frames) n. exc 1.50 Sqm each complete all as pecified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters and grill from the frames) exc 1.5sqm but n. exc 4 Sqm each complete all as pecified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as pecified and directed.

Taking down shutter of any description exc 1 Sqm and n exc 2 sqm including easing , cutting & adjusting shutters and refixing in the same opening all as specified and directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L Cement concrete 1:2:4, type B0 (12.50mm graded stone aggregate) for 25mm thick floor as in sub base for floor tiles complete all as specified and directed.

M & L for brick work in modular size with sub-class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6), complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and fair incl cutting joints and filling with bitumen and sand mixturecomplete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles (colour as approved laid in pattern as approved by GE ) size 300mm x 450mm x 7 mm thick on vertical surfaces such as dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Double charge/ultracharged vitrified tiles of any colour 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick bedding layer in cement sand mortar 1:6 complete all as specified and directed.

M&L for Double charge/ultracharged Vitrified ceramic tiles 10mm thick of any shade (square / rectangular) area of each tile as in as in skirting or on vertical surfaces, not exceeding 0.36 sqm, etc .set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in cement sand mortar 1:4 complete all as specified and directed.

M&L Machine cut mirror polished kota stone slab flooring with rounded edge 18-20 mm thick over and includingcement screed bed (1:6) 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.(Note : Steps landing single piece kota stone and edge rounding complete )

M&L Machine cut kota stone skirting 18-20 mm thick in riser of steps skirting, dado, and pillar over and including 10mm thick backing coat in cement mortar in (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar (1:6) on faces of brick work and finished the surface fair and even without using extra cement complete as specified and directed

M & L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finished even and smooth without using extra cement.Note :- Rate included for chajja,parapit,curved surface complete.

M & L for rendering 10mm thick in cement mortar (1:3) as in ceiling on fair faces of brick work and finished the surface fair and even without using extra cement complete as specified and directed

M &L for preparation of newly plastered surface and applying two coats of distemper oil emulsion over a coat of primer and putty white or tinted on wall surfaces complete all as specified and directed.

M&L for two coats of weather proof paint on newly plastered external wall surfaces incl preparation and over a coat of primer and cement based wall care putty all as specified and directed

M &L for preparation of newly plastered surface and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of of wall, washing, scrubbing down and stopping of disterpered and painted surface old plastered/ decorated surface and applaying two coat wallcare putty for smooth finished of the surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M &L for complete removal of existing treatment and preparation of wall, washing, scrubbing down and stopping of old treatment and painted surface of plastered/ decorated surface and applying cement base wall care putty and two coats of weather proof paint over a coat of primer on wall surfaces complete all as specified and directed.

Preparation of Old decorated surface and applying two coat of white wash on Ceiling etc complete and as directed.

M & L preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and directed..

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and directed.

M&L Preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Preparation of New Steel surface and applying two coats of synthetic enamel paint over a coat of red oxide over 10 cm width or girth all as specified and directed.

S&F Pressed steel frames for doors size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., all as specified and directed.

S&F Pressed steel frames for doors size 105mm x 60mm with one rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F 2nd class hard wood glazed and skeleton shutters, 35mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24- (a), supplied and fitted to chowkats.

S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 12 mm BWP commerical ply . The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing with prelam sheet all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet used instead of plain colour PVC sheet with solvent cement for stiles and top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour Prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

Providing and fixing of double rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge.Make NCL Window or equivalent

Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws. Make :NCL Ventilator or equivalent all as specified and directed.

S&F fixing in repairs steel window hinges including cutting out existing broken hinges and necessary welding

S&F 300mm long Aluminium alloy, anodised, sliding bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alloy all as specified and directed.

S&F 150mm Aluminium anodised barrel tower bolts of extruded sections all as specified and directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised all as specified and directed.

S&F 100mm butt hinges , medium weight, cold rolled, mild steel all as specified and directed.

S&F 100mm butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21 of size

S&F in repairs 300mm ordinary rat and tail rod pattern springs including roller plate and roller complete of mild steel all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40 mm fixed with wooden beeds complete all as specified and directed.

S&F in Repair Stainless steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples with wodden beading on wooden shutter or with screws to steel shutter complete all as specified and directed.

S&F in repair 18mm thick factory made PVC sheet one side prelam sheet kitchen cabinet shutter .The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for making edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc. Complete all as per direction of Engr-in- Charge manufactures specification.

S&F 40mm flaps width (when open) continuous (Piano) hinges mild steel bright finish or electrogalvanised

S&F 125 mm size MS mat / glossy finish handle complete as specified and dirceted.

S&F 100mm Hasp & Staple, safty type Aluminium anodised with steel hinge in including bolt hing plate and fixed with screws.

S&F in repair Stainless steel curtain rod/rail 25 mm dia complete all as specified & directed.

S&F in repair Stainless steel curtain rod brackets 25 mm dia including necessary stainless steel clamp complete all as specified & directed.

Supply and welding 50mm mild steel medium weight butt hinges complete all as specified and directed.

S&F small fittings such as brackets of any type latch and hinges block shaped door and window stops and the like incl all necessary labour articles not ec 200 Cucm each in 2nd class hard wood complete all as specified and directed.

Providing and fixing SS railing of ht 1.0m at various locations with ss Pipes of grade 304 and top hand rail of 50mm dia 1.5mm thickness and fixed on square baluster of 48x48x1.5mm to be fixed at spacing not more than 1200mm and 3Nos horizontal members of 20mm dia 1.5 mm thick fixed with D button on baluster including bottom flange of 75x75mm complete all as specified & directed by engineer-in- charge.(Incl: cutting, welding,drilling holes in existing floor and welding ends on existing RCC columns.) complete all as specified and directed.

Providing and fixing SS railing of ht 0.2m at various locations with SS Pipes of grade 316 and top hand rail of 50mm dia 1.5mm thickness and fixed on square baluster of 20x20x1.5mm to be fixed at spacing not more than 1200mm fixed with MS bolts grouted in RCC members with epoxy chemical & fixed with 40x40mm square flange. (Incl: Cutting,welding,drilling holes in existing floor and welding ends on existing RCC columns.) complete all as specified and directed.

S&F fibre glass reinforceed translunt corrugated sheeting 2 mm thick with two corrugations side lap fixed with L-type or J type or crancked hook including demolation/dismantling of old sheet complete all as specified and directed.

S&F of framed brackets of angles ot tees with web and flanges cut to shape ,drilled and countersunk for screw including bending and welding angles,conforming to Fe 290 Gde-E-165 complete all as specified and directed.

Taking up or down steel tubing and connections for bore of tube 15 mm, complete all as specified and directed.

Taking up or down steel tubing and connections for bore of tube 20 mm, complete all as specified and directed.

S&F of 20mm steel water tubing, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F of 15mm steel water tubing, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:4 ,cutting depth not exc 10 cm complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors etc. ) 20mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors etc. ) 15 mm bore of pipe complete all as specified and directed.

S&F in repairs fancy type CP two way bib cock of 15 mm bore complete all as specified and directed (Make Jaquar cat part No DRC - 37041 or equivalent Plumber/Marc) .

S&F in repairs health faucet CP with connecting pipe 1 Meter long with stand (Make Jaguar cat part No - ALD - 565 or equivalent Plumber/Marc)

S&F 15mm bore brass CP wall mixer for mixing hot and cold water screwed down with provision of over lead shower and cock for iron pipe and fixed complete all as specified and directed. (Make Jaguar cat part No - FUS-29273UPR or equivalent Plumber/Marc)

S&F in repairs Shower rose with brass chromium plated shower rose with or without swivel joints, 125mm size including fixing to steel pipe or union

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs Brass chromiun plated tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges, fixed in repair. (Make Jaquar cat part No - .ACN 1111NM or equivalent Plumber/Marc)

S&F Sheet glass shelf assembly consisting of 5.5 mm thick glass shelf 120mm wide with chromium plted bracket gouard and railing 600 mm long Make-Plumber cat No.U-0918 or equivalent of jaquar/Marc)

S&F in Repair Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified & directed by Engineer-in-charge.

S&F in Repair PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets, 15mm dia PVC Connection & Flushing pipe all as specified & directed .

S&F in repairs wash hand basin ovel type, vitreous china, of size 550mm x 400mm fixed complete incl fixing the same in to granite slab complete including CP waist coupling , waste pipe, PVC Connection of twice on each WHB for Hot & cold all as specified and directed,(Note:- Cost of granite slab will be separatly in respective item of BOQ).

S & F in repair Chrome Plated Swan Neck Tap , for WHB fancy type cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed15 mm dia bore pipe. complete all as specified and directed (Make Jaguar cat part No CON-123BKN or equivalent Plumber/Marc)

M&L granite 16 to 18 mm thick machine cutting including grinding and polishing and bullnosing the exkruded edging and chamfering and nosing of inner edges incl cutting to accommodate the WHB and bottom support kotastone stone slab complete all as specified,

S&F looking mirror 4 to 5 mm thick fixed on 8mm thick commercial decorative water proof ply wood with coloured PVC or aluminium frame all around complete all as specified and directed. (Make-Modi/Atul/Saint Globin as approved by GE).

S&F in Repair Stop valves/angle cock, 15mm dia pipe cast copper alloy, fancy type, chromium plated with long shank and cup screwed down, high pre-ssure, for iron pipe or for unions and fixed (Make Jaguar cat part No - FLR - 5053N or equivalent Plumber/Marc)

S&F in Repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls heights up to 9M.

S&F in Repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls heights up to 20M.

M&L in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete.

S&F in repair 75mm dia PVC (SWR) bend with any radius

S&F in repair 75 mm dia PVC (SWR) branch piece (single Y)equal or unequal with oval access door

S&F in Repair 75mm dia PVC (SWR) Tee with single junction with any radius with wall access door.

S&F in repair 110mm dia PVC (SWR) bend with any radius

S&F in repair 110mm dia PVC (SWR) Tee with single junction with any radius with wall access door.

Dismantling water tanks and removing to store exc 250 & n. exc 1000 litres capacity complete all as specified and directed.

S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 litres capacitycomplete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc and hoisting if required and re-fixing in position exc 500 & n. exc 1000 litres capacity complete all as specified and directed.

S&F in repair 20mm dia Ball valves,of PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15 to 25mm to 142 - 455 gms)

S&F in repair 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed complete all as specified and directed.

M & L Demolition of ends for damaged portion of chajja /facia portion scrafying or removing Old loose dirt of cement concrete and removing of Old rusted reinforcement, lathing/welding of new reinorcement for damaged portion, fixing of 0.71mm dia wire netting of galvanised steel wire of size 12mm mesh fixed with tinned tack of wire stable for damaged portion and applying in CM (1:3) with level plaster for width of facia /Chajja exc 10mm and n.exc 60mm finished even and smooth without using extra cement and including necessaryuse and waste of form work and concerting with PCC (1:2:4) type B-0 using 25mm graded stone agg mixed with Dr fixit concrete bonding solution as per manufacturer Instruction for required places, height of the bldg up to third floor from the above ground level for work all as specified and directed.

M & L for RCC 1:2:4 type B-1 (Using 20mm graded crushed stone aggregate) as in Patch work for certain places of Roof slab , facia, Chajja with necessary from work and the height of the bldg up to third floor from the above ground level for work all as specified and directed.(Note Rate will be include for reiforcement also)

M&L for PCC 1:5:10 type E2 using 40mm graded aggregate oas in Mass concrete in sunkan treatmentcomplete all as specified and directed.

M&L Rendering 10mm thick on fair faces of Brick / Concrete Surfaces of roof in CM (1:4), mixed with liquid water proofing compound@200ml per bag of cement, finished even & smooth without using extra cement complete all as specified and directed.( Note liquid water proofing compound measured separately.

Supply only Liquid water proofing compound (Make Pedilite SBRX super latex ) complete all as specified and directed.

M & L Water proofing treatment to roof , edges of roof ( Vertical or tapered portion) etc, in following portion sequence :- (i) Properly cleaning and drying the surface (ii) Applying priming method over cleaned surface, (III) Laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) Keep minimum 100mm overlap laid on primed surfaces by sealed and bonded to the surfaces by torching Method, and Applying Two coats of alumunium painting on water proofing treatment complete all as specified and directed, Including removing existing membrene with cement plaster complete all as specified and directed.

M&L for water proofing treatment to sunken surfaces of the slab in following sequences:-( for 5 Years Gauranty)

Slope correction by using M-20 (Nominal Mix) concrete minimum 25mm thickness at one end and a slope of 1:20 by using 12.5 mm graded stone aggregate with integral water proofing Chemical PIDI PROOF-LW mixed in proporation 200ml /50 Kg cement of DR Fixit of Pidilite Industries Ltd or STP No 1 (liquid) of STP Ltd in proporation 200ml / 50 Kg cement or equivalent as per manufacturer instructions complete.

(b) PCC padding with cement concrete 1:1.5: 3 type A 0 (using 12.5 mm graded stone aggregate) 25mm thick with integral water proofing compound "Dr Fixit" manufactured by M/S Bouchemic or equivalent as per manufacturer instructions complete.

Vertical sides plastered in CM 1:3, 15mm thick with WPC and 72 hours testing for water tightness by ponding of water complete.

Application of two coats proof coats black manufactured by M/S Dr fixit or equivalent as per manufacturer instructions all over and testing again for water tightness by ponding of water for 72 hours complete.

Taking down carefullycopper/aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, sockets ,ceiling rose, light fittings etc, and making good the disturbed surface of walls and floors etc all as directed .

Taking down carefully copper/aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc all as directed .

Taking down carefully MCB DBs/sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.

Taking down existing ceiling fans/exhaust fans any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/connector complete all as specified and directed by Engr-in-Charge.

M & L for Point wiring in repairs including with PVC insulated FR PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area for phase/neutral in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green FR PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including galvanised boxes as suitable for Modular wiring system for mounting switches, sockets, fan regulators etc for the following :-

One light/fan/bell point controlled by one switch

One 5amps socket out let point controlled by one switch on same board with other switches.

One 5amps socket out let point on independent board controlled by one switch.

Ditto all as per item No 109 here in before but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

Supply and fix in repairs Modular Switch flush type 6 Amps single pole, one way complete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Socket outlet, multi purpose, 5 Pin combined 6 Amps flush type complete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Bell push flush type, 6 Amps complete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket complete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Switch 16 Amps single pole, one way complete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply & fix in repairs modular fan regulator step type, 2 module type complete. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fixing in repairs white finished single mounting modular plates sutable for modular accessories of following sizes:(Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS).

Suitable for 1/2 modules

Suitable for 3 modules

Suitable for 4 modules

Suitable for 8 horizontal modules

Supply and fix in repairs sheet metal boxes concealed in wall suitable for housing modular accessories of following sizes :-(Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS).

Suitable for 1 or 2 modules 50mm.

Suitable for 3 modules 50mm.

Suitable for 4 modules 50mm.

Suitable for 8 modules 50mm.

Supply and fix in repairs Bell, ding dong type, AC 230 Volts, single pole complete. Make :- Anchor , Havells , Legrand

S&F in repairs ceiling rose surface bakelite three terminal complete all as directed.

S&F in repairs lamp holder insulated body with back plate for batten fittings complete all as directed.

Supply and fix LED bulb of 7 watt, Of base B-22, suitable for fixing in lamp holder.

Supply and fix in repairs LED batten suitable for retrofit type LED tube upto 1x22 Watt, without LED tube, pre-wired for LED tube, complete with all accessories duly connection with three core flexible copper cable and duly fixed on two Nos PVC square boxes complete all as specified and directed.

Supply and fix in repairs retrofit LED tube light T-8 type, 1x20 Watt, 6500K with single side connection complete all as specified and directed.

Supply and fix in repairs LED tube light fittings 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of pvc square boxes complete all as specified and directed.

Supply & fix surface mounted round LED panel of 12W Al die cast body with premium diffuser to ensure glare free & even distribution of light complete with electric connection all as specified and directed by Engr-in-Charge.

Supply and fix in repairs Wall light fittings suitable for & including LED bulb of 7 watt, including connection with all necessary fixing accessories complete all as specified and directed by Engr-in-Charge. Make :- Havells Cat No. LHDL07150099 or equivalent in Bajaj, Philips/Crompton.

M&L for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 6.0 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed.

Supply and fix in repairs double door SPN DBs eight ways of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete.

S & F in repairs MCB SPN 6 to 32 amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F in repairs MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F (in building peripheri) energy efficient, compact street lighting 25 Watt LED with deep drawn Alluminium housing complete with conncting wire and provision of GI bracket, clamp, nuts, bolts grounded in wall incl all fixing arrangement.

Supply and Fix in repairs flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for 100-125 amps MCCB as incomer and SPN/TP MCBs as out going, 4 way (Optium 1+12 Module) complete all as specified and directed by Engr-in-Charge.

S&F (in replacement) MCCB 4 pole, 415 volts, in the existing panel / location and connection with using aluminum lugs complete all as specified and directed for 125 Amps rating, 16 KA breaking capacity complete

Supply and lay XLPE insulated armoured heavy duty electric cable with stranded aluminium conductor 1100 Volts grade of size 35 sq mm 3.5 core, cross sectional area lay trenches/wall/poles/ducts/pipes or through sleeve etc including connecting/jointing with lugs and testing all as specified and directed by Engineer-in-Charge.

Supply laying and jointing GI pipe 'light grade' 50 mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/dense soil and getting out complete all as specified and directed .

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

Material and labour for approved river sand cushioning for under ground cable in trenches 8 cm before laying and 15 cm after laying of cable and punned thickness of sand shall be measured and paid for 18 cm only after punned/consolidated thickness complete all as specified and directed.

M&L for bricks slightly over burnt (kiln burnt) , modular bricks , best quality, locally available , laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection all as specified and as directed.

M&L in repairs for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 4 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed.

M & L for earthing complete with galvanised steel earth p;ate 600mm x 600mm x 6mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised Iron Wire of size 4 sq mm as earthing lead by means of bolts, nuts, cheek nut and washers of galvanised iron or steel besides at all joints as shown in Electrical Plate No-3 of SSR Part I and including excavation and earth work GI pipe 20 mm dia light grade protection pipe and including chorcoal filling common salt ,PCC 1:3:6 type CI using 20 mm graded stone aggregate chamber and MS angle iron frame 40x40x6mm and RCC cover 40mm thick (1:2:4) type B-1 using 20mm dia graded stone aggregate reinforced with 6mm dia round bars @ 75 mm c/c both ways with MS handle 12mm dia, CI funnel and wire mesh 20mm dia GI pipe medium grade for watering and connected to earth Test point (Including testing complete all as specified and directed).

Jamna Constructions

R. S. JAIN AND SONS

M/S Ashish Construction

sabir and brothers

Goyal Construction

sunway associates