SBM 2.0 Construction of Community Toilet at Ward No.15 Rajaputhur in Sriramanapuram Town Panchayat

Earthwork excavation in all soil and sub soils except hard rock requiring blasting with initial lead and lift including re filling the sides of foundation in layer of 15 cm thick watering, ramming, depositing the surplus earth in the premises as directed by the departmental officers, etc., complete complying with standard specification.

Cement concrete in 1:4:8 (one cement, four sand and eight aggregate) mix using 40mm ISS hard broken granite metal for foundation and flooring including dewatering where ever necessary and laid in layers of not exceeding 15 cm thick to required thickness including cost and conveyance of all materials to work site and labour charges etc., for mixing laying, leveling and curing etc., complete complying with standard specifications.

Supplying, fabricating and placing in position of Mild steel rod or Ribbed tar steel for all reinforced cement concrete works including cost of steel, binding wire, bending, cutting charges including cost and conveyance of all material at site and other incidental charges etc., complete complying standard specification.

Providing centering for sides and soffits of R.C.C. works such as lintels, slab & Beams etc., complete including shuttering up to 3.30M height using mild steel sheet including cost and conveyance of all labour charges etc..

Reinforced cement concrete in 1:1.5:3 (one cement, one and half sand and three aggregate) mix for all reinforced cement concrete works using 20 mm, ISS gauge hard broken granite machine crushed metal including cost and conveyance of all materials.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying, fabricating and fixing in position of mild steel door with Double shutters using M.S angle of size 40 x 40 x 6mm for outer frames and 35 x 35 x 5mm for shutter frames, fully covered with M.S sheet of 18 gauge with M.S flat of size 32 x 6 mm for internal stiffners and one number of aldrop , two numbers of tower bolts, holdfasts, hinges, handles etc., including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials labour charges for fixing the door in position by dismantling the masonry, concrete etc. and redoing the same to the original condition duly packed with concrete etc., complete. (TWAD SOR 2017-18 Item No:20,Sl.No:(IV))

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Supply and fixing in position of RCC Jolly 50mmtk including cost and conveyance of all material to site and all other labour charges for fixing etc., Complete.

Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm 'P' os 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank.

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Plastering in cement mortar 1:3 (one cement and three sand) mix 10mm thick including cost and conveyance of all materials to work site all labour charges watering, curing and all and other incidental charges etc., complete complying.

Plastering with cement mortar 1:5 (one cement and four sand) mix 12 mm thick including cost for materials and all labour charges for mixing, laying and curing etc., complete as per standard specification.

Flooring with Ceramic tiles of size 300 x 300 x 6 mm with design (design should be got approved by the departmental officers before purchase) ceramic tiles (color and shade as directed) including cost and conveyance of all materials and all labor charges etc

Emulsion Painting in two coats using using best quality Emulsion paint including cleaning surface watering curing including cost and all labour charges etc., complete as per standard specification.

Painting the new iron work with two coats of synthetic enamel paint of approved color by the departmental officers over a priming coat excluding cost of priming coat complying with, standard specification

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light (6 Points Per Coil) (For Rooms like Bath , Toilet,& Pump room etc..)(SD-26)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL.(SD.83).

Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains.(SD. 64).

Supply and delivery and fixing of 1000 Liter Capacity PVC Water tank including loading,unloading, transportation and labourcharges for fixing charges etc.,(Rate as Per TWAD SOR 17-18)

Supplying and fixing in position best quality PVC soil / waste pipes of 110mmdia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). Above Ground Level

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing of 16Amps DP Switch with Metal Galad of 500 V with Fuse and Neutral (Side Handle) on T.W.Box with P.W.D.Earting(SD No.141)

Conduction Geocysical Survey with Scientific Instruments including transportation charges

Drilling of 150 mm bore well in Hard rock formation using rig including Erection of casing pipes,transportation and fuel charges of Rig to site and all labour charges etc complete.(As per Local market Rate) 0.00 m to 150.00m

Supply and fixing of 200mm CS dia PVC casing pipe including cost of materials and all labor charges etc.,

Suppy and delivery of GI specials and PVC Specilas etc complete, 2HP Submersible Motor 20x150 M head

Panel Board upto 2 HP

4 Sqmm Copper Cable

32mm GI Nipple (1 Feet)

32mm GI Elbow

32mm UPVC Pipe

32mm GI Coupling

32mm GI Union

32mm GI Bend

32mm NRV

25mm UPVC Pipe

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., comp

MOHAMED RASMI H