Repair work of damaged Bearing/Expansion joint of the bridge situated on Khari river at Km-46 (Iradatnagar) of Firozabad-Fatehabad- Saiya- Kheragarh- Achhnera- Bharatpur road.

Strip Seal Expansion Joint Replacement of existing damaged expansion joint by Providing and laying of Strip Seal Expansion Joint System, including cleaning of gaps, dismantling of deck slab portion near expansion joint, wearing coat etc. and back filling of the recess up to final finish level with concrete of grade M - 35, complete as per approved drawing(s), M.O.R.T&H technical specification section 2607. (Including Supply of Material, Labour and T&P work complete as per direction of E-in-C. Including all taxes but excluding GST.)

Lifting of superstructure span by jacking up from below i.e. by placing the jacks on pier/abutment caps for span length of 30m.Lifting of deck uniformly by deploying appropriate hydraulic jacks in combination with screw jacks with centerlized power pack up to 50 mm to facilitate for rectification of existing bearing appropriately without damaging the girders. After complection of the restoration of main girders at support stengthening / restoration of pedesral by micro concrete / polymer concrete / epoxy mortar with reinforcement cage replacement of proposed according previously damaged metalic bearing rockers and roller same and specified design (all items will be extra ) lowering of deck shall be carried out to its original position without causing any damage to the deck as per drawing and standard practice. The item includes of all labour ,materials , equipment etc. complete as per direction and intructions of Engineer in charge including MORTH & H technical specification ( clause 2810 ) (one span-4 bearing) (Sl-17.15). (Including Supply of Material, Labour and T&P work complete as per direction of E-in-C. Including all taxes but excluding GST.)

Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per MoRTH specification 5th revision clause No. 503 including cost of all materials, T&P, labour, cartage for proper completion of work as per direction of Enginee-in-Charges. (Including Supply of Material, Labour and T&P work complete as per direction of E-in-C. Including all taxes but excluding GST.)

Providing and laying bituminous concrete (Grading-II) with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 as per approved job mix formula which ever is higher of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification 5th revision clause No. 509 complete in all respects including cost of all materials, T&P, labour, cartage for proper completion of work as per direction of Enginee-in-Charges. (Including Supply of Material, Labour and T&P work complete as per direction of E-in-C. Including all taxes but excluding GST.)

Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy (Including Supply of Material, Labour and T&P work complete as per direction of E-in-C. Including all taxes but excluding GST.)

Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1. (Including Supply of Material, Labour and T&P work complete as per direction of E-in-C. Including all taxes but excluding GST.)

Epoxy bonding of new concrete to old concrete (Including Supply of Material, Labour and T&P work complete as per direction of E-in-C. Including all taxes but excluding GST.)

All charges manufacturing and , replacement of GI Drainage spout as per Morth specifications complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation. including cost of all materials, Labour, cess T&P etc. and all taxes complete but Excluding GST. (Including Supply of Material, Labour and T&P work complete as per direction of E-in-C. Including all taxes but excluding GST.)

GP2 grouting material applying and concreting work M35 in Expension both ends including cost of form work including supply of all material labour T&P etc complete as per direction of Engineer Incharge (Including Supply of Material, Labour and T&P work complete as per direction of E-in-C. Including all taxes but excluding GST.)

Note - 1- Rates are inclusive of all taxes but excluding GST which shall be paid extra as applicable 2- Labour cess @ 1% will be deducted from contractor's bill at the time of payment

Please Enable Macros to View BoQ information