REPAIR AND POLISHING AND PAINTING OF WOODEN AND STEEL FURNITURE IN OFFICERS MD ACCN AND UNIT AND OFFICERS AND RECANNING OF VERANDAH CHAIRS AT NDA KHADAKWASLA

Amount

Almirah Steel med (FD 67/1032) FD-67/1032 S&F following components of Almirah steel med including dismantling unservicable one all as specified and as directed Lock 6 levers with duplicate keys Make of Lock- LICO/Tulsi/VRL

S&F handle 100 mm size mild steel chromium plated

3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer. FD-67/1032

S&F leg made of 1 mm CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

Adjustment/welding of existing shelves by providing new clamps after removing unserviceable clamps all as directed

S&F door shutters made of 1 mm CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing. FD-67/1032 Note Painting to all steel surfaces shall be done with spray painting only. Make of Lock-LICO/Tulsi/VRL

S&F shelves made of 1 mm CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends complete all as specified and as directed.FD-67/1032

Almirah steel large (FD-67/1031) S&F following components of Almirah steel med including dismantling unservicable one complete all as specified and as directed Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL)

Handle 100 mm size mild steel chromium plated FD-67/FD-1031

3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer. FD-67/FD-1031

Adjustment/welding of exsisting shelves by providing new clamps after removing unserviceable clamps complete all as directed

S&F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer. FD-67/FD-1031

S&F door shutters made of 1mm thick CRCA sheet including mild steel chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing Make of Lock-LICO/Tulsi/VRL) FD-67/FD-1031

S&F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer. FD-67/FD-1031

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete including dents/bends complete all as specified and as directed. FD-67/FD-1031

Locker steel (FD-1029) S&F following components of Locker steel including dismantling unservicable one complete all as specified and as directed. Handle 100 mm size chromium plated

Hasp & staple 100mm chromium plated. FD-1029

S&F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer. FD-1029

S&F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, mild steel chromium plated hasp & stapple of approved quality and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and as directed. FD-1029

S&F new curtain rod SS of size 20mm dia of 1.6mm wall thickness of locker steel FD-1029

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of synthetic enamel paint of olive green shade/Smoke Grey of approved quality both inside and outside complete including dents/bends complete all as specified and as directed. FD-1029

Cupboard steel large multipurpose for cadets- CWE/PNASK/3196 S & F following components of Almirah steel med including dismantling unservicable one complete all as specified and as directed Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL)

Handle 100 mm size mild steel chromium plated.

3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer. CWE/PNASK/3196

S&F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer. CWE/PNASK/3196

S&F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing. Make of Lock-LICO/Tulsi/VRLCWE/ PNASK/3196

Adjustment/welding of exsisting shelves by providing new clamps after removing unserviceable clamps complete all as directed

S&F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.CWE/PNASK/3196

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete including dents/bends complete all as specified and as directed. CWE/PNASK/3196

Table dining 900x 900 mm steel (FD-1009) S&F following components of Table dinning 900x900 mm steel including dismantling unservicable one complete all as specified and as directed. (a) Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion.

Table top made of 18mm thick pre-laminated MDF board exterior quality of teak line shade including provision of 4mm thick teakwood beading all around. FD-1009

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality.FD-1009

S&F PVC shoe as per FD-1009 by removing old shoe.

Table 900x 600 mm steel with /W/O drawer FD-1007/1008 S & F following components of Table dinning 900x600 mm steel including dismantling unservicable one all as specified and as directed. (a) Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion.

Table top made of 18mm thick pre-laminated MDF board exterior quality of teak line shade including provision of 4mm thick teakwood beading all around. FD-1007/1008

Removing old unserviceable drawer and S/F new drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing and providing new lock 6 lever to top drawer. FD-1007/1008

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality. FD-1007/1008

S&F PVC shoe as per FD-1007/1008 by removing old shoe

Teapoy verandah -Taking down old unserviceable top and providing new top made up 18 mm thick BWR plywood pasted with .8mm thick white laminated sheet including 4 mm thick teak wood beading all round complete all as per drawing. FD-28/FD-255

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of white shade of approved quality. FD-28/Fd-255

Book Case Steel FD-1028 Removing old unserviceable roller /slider and S/F new roller complete for smooth sliding of compartments of Book case complete all as per drg

Removing old unserviceable broken glass of compartment of book case and S/F new transparent glass of 4mm thick as per drg. FD-1028

Removing old unserviceable handles of compartments of book case and S/F new CP handles of 100 mm long as per drg. FD-1028

Removing old unserviceable locks of compartments of book case and S/F new locks as per drg. FD-1028

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive grey shade of approved quality. FD-1028

Table serving marble top (1520 x 850 x910mm) Removing old u/s top of table and S/F new top made out of 18 mm thick BWR plywood covered with .0.5 mm thick stainless steel sheet all around top and upto 100 mm inside back of top on all side. TP

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of approved shade of approved quality.

Chair dining cadet Removing old unserviceable seat from chair dining cadets and supply & fix new seats made out of moulded plywood pasted with 0.8 mm thick laminated sheet of approved shade. TP

Removing old unserviceable back from chair dining cadets and supply & fix new back made out of moulded plywood pasted with .8mm thick laminated sheet of approved shade. TP

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying two coat of synthetic enamel paint of black shade of approved quality. TP

Removing old unserviceable shoes from legs of chair and supply & fix new PVC shoe complete all as per sample. TP

Table Dining cadets (1670 x 750 x 760mm ) FD-1012 S&F following components of Table dinning cadets steel including dismantling unservicable one complete all as specified and as directed. Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion.

Table top made of 18mm thick pre-laminated MDF board exterior quality of teak line shade of size 1720 x 750 mm) including provision of 4mm thick teakwood beading all around. FD-1012

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of black shade of approved quality. FD-1012

S&F PVC shoe as per FD-1012 by removing old shoe.

Table office officer/clerk steel (FD-84/1003,1004 ) S & F following components of Table office/clerk steel including dismantling unservicable one complete all as specified and as directed. Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer. FD-84/1003/1004

Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL FD-84/1003/1004

Complete box comprising of 03 drawers made of 1mm CRCA sheet including locking arrangement/accessories and painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer/putty for table office Officer/Clerk Steel. FD-84/1003/1004

Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete of Table office Officer Steel. FD-84/1003/1004

Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete of Table Office Clerk Steel. FD-84/1003/1004

S&F PVC shoe as per FD-84/1003/1004 by removing old shoe.

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office officer steel. FD-84/1003/1004

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office clerk Steel. FD-84/1003/1004

Chair Verandah(FD-256) Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable 04 Nos PVC shoes to the each chair of approved quality.

Bed Hard MAP Steel-Removing old unserviceable plywood top from Bed hard Steel MAP and S/F new BWR plywood top of size 7'x4'x12 mm thick confirming to IS: 303 as shown on drg. Rest complete all as per drg and directed. Make of plywood-Greenply/Archidply/ Century. FD/E6MAP/8

Removing old unserviceable Particle board from Head board. and S/F New Headboard made out of 18mm thick prelaminated MDF board of teakshade both side .Edges all around pasted with 4mm thick foam/ pvc beading. FD/E6MAP/8

Removing old unserviceable particle board from foot board. and supply & fix New footboard made out of 18mm thick prelaminated MDF board of teakshade both side edges all around pasted with 4mm thick foam/ pvc beading. FD/E6MAP/8

Preparation of old painted steel sufaces of Bed hard steel by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying one coats of black synthetic enamel paint including fixing of four Nos of PVC shoes to each bed FD/E6MAP/8

Charpoy hard Map Steel- Removing old unserviceable plywood top from Charpoy hard Steel MAP and S/F new BWR plywood top of size 7'x4'x12 mm thick confirming to IS: 303 as shown on drg. Rest complete all as per drg and directed. Make of plywood-Greenply/ Archidply/ Century. FD/E6MAP/8

Preparation of old painted steel sufaces of Bed hard steel by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying one coats of black synthetic enamel paint including fixing of four Nos of PVC shoes to each charpay FD/E6MAP/8

Hot Food Trolly Removing of unserviceable heating element, u/s internal wiring,u/s pots, switch socket & u/s indicator etc and S & F new heating element, new internal wiring, new pots, new switch socket & new indicator compelete all as specified and directed. TP

Removing of US caster wheel from trolly hot food and S & F with welding new heavy duty wheel as per sample held andas per existing size compelete all as specified and directed.TP

Removing unserviceable hydraulic cylinder of (up down system) including lever and S&F new hadraulic cylinder of (up and down) including lever compelete all as specified and directed. TP

Table writing cadets steel TP S&F following components of Table office/clerk steel including dismantling unservicable one complete all as specified and as directed. Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL. TP

Complete box comprising of 03 drawers made of 1mm CRCA sheet including locking arrangement/accessories and painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer/putty ofTable office Officer/Clerk Steel. TP

Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete. TP

S&F PVC shoe as per TP by removing old shoe.

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of black /Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed. TP

PAINTING Preparing old painted steel surfaces (internal & external) by sand paper, cleaning, including denting patches by filling putty (metal paste) and Spray painting one coat to a uniform finish with synthetic enamel paint complete, shade as directed by GE. FD-157 Table bed side steel Hospital.

Chair easy steel. FD-121

Stool steel FD-103(M) /81

Rack adjustable steel 3 tier. FD-1039

Rack adjustable steel 6 tier. FD-345/1038

Rack side 3/4 spaces. FD-1023

Ladder for loft. FD-1025

Form With Back steel. FD-78 (M)

Form Without Back steel. FD-77(M) 1027

ladder for loft steel

Polishing Removing old stains and polish from old wooden furniture by using electric motor grinder and Emrik paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade complete all as directed by GE. FD-/FD228279 Chair Dining

Chair Easy FD-229

Chair writing. FD-250/280

Table Dining Six/Eight person. FD-273

Bed plywood top. FD-246

Table office officer wooden/clerk wooden. DB-4119/4120

Table dressing ladies. FD-251/232

table dressing gents. FD-230/231

Table peg. FD-277

Table Centre. FD-274

Side Board. FD-241

Book case. FD-41M

Table writing. FD-275

Sofa Set Four Seater. FD-281

Sofa set five seater. FD-281

Table computer for three person (Cadet) wooden Length-1800mm. TP