Construction of new building for Fire and Rescue Service station and office with development works at Gangavalli in Salem District

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.3 : Earth work excavation in Soft disintegrated rock (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6 : Supply and filling of 40 mm HBSJ

2.7 : Supply and filling of 20 mm HBSJ

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

24 : Manufacturing & supply of steel windows (Weight basis)

25 : M.S.Holdfast

30 : Ellispattern

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

77.3 : S&F of TV/Telephone line Socket

77.4 : S&F of 20mm dia PVC pipe for TV/Telephone line

78 : Earthing Station IS3043 (Type I)

81 : Meter cupboard

86 : Anti termite treatment

ANNEXURE 2.1.1 : Supplying and filling with gravel

2.1.3 : Filling sand (using crushed stone sand)

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1: P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1: P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

3.9.1 : PCC 1:3:6 for foundation & basement using 40mm metal (using crushed stone sand)

6.2.1 : Brick work in C.M. 1:5 in Foundation and basement using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand)

8.1.1.1 : Standardised concrete Mix M20 Grade Concrete (using crushed stone sand) a) In Foundation and basement

b) In Ground Floor

c) In First Floor

9.2.1 : Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")(using crushed stone sand) a. In Ground Floor

b. In First Floor

10.2.1 : Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.)(using crushed stone sand) a. In Foundation and basement

b. In Ground Floor

c. In First Floor

11.2.1 : Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.)(using crushed stone sand) a. In Ground floor

14.1.I : Precast Cupboard slab 20mm tk. using standardised concrete mix M20 (Using crushed stone sand) a) In Ground Floor

14.1.II : Precast Cupboard slab 40mm tk. using standardised concrete mix M20 (Using crushed stone sand) a) In Foundation and basement

16.1.2 : Precast Jally Ventilator 50mm thick.Using standardised M20 grade concrete Mix withouty vibrating charges. (using crushed stone sand) a. In Ground Floor

18.1 : Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Verticall wall

f.Curved surface

g. Double centering portico area

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.5.1: Supplying and fixing of solid core flush door shutter of thickness 35mm a. Door size 1000mm x 2100mm (Single leaf)

b. Door size 900mm x 2100mm (Single leaf)

21.6.1 : R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm M20 grade (with out vibrating charges) (using crushed stone sand) a. 900x2100 mm

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) Mixed with Super Plasticiser

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 :Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).(using crushed stone sand)

31.2.1 : Finshing the top of Terrace floor with one course of solar reflective Ceramic tiles without base concrete (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasticiser

34.1: Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) Mixed with Super Plasticiser

35.1: Spl. Ceiling plastering in C.M. 1:3,10 mm tk.(using crushed stone sand) Mixed with Super Plasticiser

35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.4 :Two coats of cement paint over one coat white cement

38.6 : One coat white cement for new walls and other similar works.

38.7 : Plastic Emulsion PAINT including primer for outer

43.1 : Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2 : Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1: Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.3.1 : Supply and planting avenue trees (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.3 : S&F of C.I steps (5 kg )

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5 : Wash Hand Basin of size 550 x 400 mm

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

57.1.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" TRAP (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.5 : PVC(SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.2.1 : Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way) (using crushed stone sand)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1 : PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

b. 160 mm dia PVC bend

62.2.2 : PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

71.2 : Supplying and fixing of 32 AMPS Triple pole main switch.

75.1 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.2.1 : S & F of 20 amps DP plug & Socket in sheet enclosure with 32 A DP MCB in flush wall with earth connection(For AC Plug)(Legrand (MDS)/Hager (L&T) equalivalent /superior variety

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

79.2.1 : S&F of 3 Nos of 32 Amps - Fuse unit.

80.1 : S&F of 450 x 375 x 20mm thick TW plank

85.1 : Supply and fixing of G.I pipe 40mm dia 'B' Class

87.1 : Supplying and delivery of Three phase ELCB/RCCB

98.3.1 : TW panelled single door shutter (with brass fittings) a. 1000 x 2100mm. (Single leaf)

105.1 : Run off 4 x 4 Sq mm copper PVC insulated unsheathed single core cable for 3 phase EB service connection.

112.1 : S & F of Exhaust Fan 225mm dia

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.5.1 : S&L of Vitrified Tiles flooring (ivory) (using crushed stone sand)

367 : Providing wooden (melamine) polish for new wood

448.2: Supply and fixing 32mm dia PVC Tee with end cap

799 : Two coat of OBD over one coat white cement for inner walls

A1 : Run off 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

A2 : Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb for Bath & WC and other Rooms

b) 12 watts LED bulb for bulk head fittings

A3 : Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A4 : Supplying and fixing of water tight Bulk head fittings with guard suitable for 12W LED lamp

A5 : Supplying and fixing of 25W LED street light with necessary fittings

A6 : Supply and delivery of wet type lubricated three phase 5 HP submersible pumpset - 150mm dia - 50 lpm X 200 m

A7 : Supply and delivery of open well three phase 3 HP submersible pumpset - 150mm dia - 50 lpm X 50 m

A8 : Labour charges for the erection of submersible pumpset in borewell/ openwell. Up to 5 HP

A9 : Supply and delivery of three phase panel board DOL - with two level guard auto start with ISI for wall mounted type a.Panel board for 5 HP submersible motor in bore well

b.Panel board for 3 HP submersible motor in sump

A10 : Supply and fixing of 32 amps three phase 500 volts 4 pole change over switch

A11 : Supplying and fixing of 32mm dia UPVC column pipes

A12 : Supplying of 3.5 core 2.5 sq.mm PVC flat copper cable(for external water supply)

A13 : Labour charges for laying of cables in trenches Inside pump room (upto 95 sq.mm)

A14 : Labour charges for laying of cables below ground level including earth work (upto 95 sq.mm)

A15 : Supplying and laying of 50mm dia GI pipe 'B' class

A16 : Supply & delivery of following dia GI, GM, CI, PVC and MS specials of best approved quality having ISI mark a.40mm dia GI Bend

b.40mm dia GI Hex nipple

c.40mm dia Gun Metal Gate valve

d.40mm dia GI union

e.50mm dia MS clamp set

f.50mm dia GI Bend

g.50mm dia GI Hex nipple

h.50mm dia GI coupling

i. 50mm dia CI Foot valve with strainer

j.50mm dia Gun metal Non Return Valve

A17 : Supplying, laying , fixing & jointing PVC as per ASTM -D1785 a.40mm dia PVC Pipe (Below Ground Level)

b.25mm dia PVC Pipe(Below Ground Level)

A18 : Supplying and fixing of following size of aluminium powder coated letters including labour charges for fixing in position cost and conveyance of all materials, scafolding, TW plugs, Screws metal paste and fixing charges etc. a) 9" dia height letters

b) 6"dia height letters

c)12" dia height letters

d)18"dia Aluminium TNPHC Emblem

A19 : Autoclaved cellurlar aerated concrete block partition wall in CM 1:4 using block size of 600x200x100mm a. Foundation & Basement

b.Ground floor

A20 : Supplying and fixing of Arch type Baregavalumme sheet roof 0.47mm thick on 4" dia M.S vertical post of 2.5mm thick

A21 : Supplying, fixing of 65mm dia GI pipe for hose drying yard

A22 : Supplying,fixing & delivery of steel cupboard rack arranagment a) Rack size 1.00 x 2.10m (6 Rows)

A23 : Supply retro reflected signs made out High intencity prismatic grade sheeting confirming to IRC 67-2010 and ASTM -D.495609 type IV specification and fixed over 3mm thick ACP. Sheet for column guard

A24 : Supply, Erection, Commissioning and testing of SOLAR POWER PLANT (Superior variety) - OFF - GRID SYSTEM: 1.25KWP

A25 : Supplying and fixing of Energy saving fan (superior variety)

A26 : Supplying and fixing of 12 W LED Street light (superior variety)

A27 : Supplying and fixing of 16 A DP MCB 240V/415V 50 HZ AC

A28 : Charges for conveying and laying of UG cable below Ground level

A29 : Supplying and laying of 3.5 C x 50 sqmm LTUG cable from meter board

A30 : Supplying and fixing & laying of PVC 110mm dia pipe below ground level

A31 : Supplying and fixing of three phase Horizontal DB box 6 Way TPDB 16A / Way with Fuse & Neutral Link

A32 : Supplying and fixing of 32 amps Double Pole switch with metal clad (Front Handle)

A33 : S & F of Single Pole MCB 6A to 32A, 10KA with ISI mark

A34 : S & F of Double Pole MCB 6A to 32A, 10KA with ISI mark

A35 : S & F of Four Pole MCB 63A, 10KA with ISI mark

A36 : Drilling of 150mm dia vertical bores hard rock area to any required depth by direct water mud circulation method using of contractor rig, tool, labour charges for drilling and water required etc., a) In over burden soil including labour charges for insertion on casing pipe line in bore well

b) Below casing pipe depth in bore well

A37 : Supplying and fixing of 160mm dia end cap for bore well of best approved quality with ISI mark

A38 : Supply , delivery and fixing of 160mm dia PVC heavy duty casing pipe of 6 Kg/cm² of approved quality with ISI mark confirming to Is specification asa per IS 12818/1992 for bore well etc complete.