REPAIRS / REPLACEMENT TO VARIOUS B/R RELATED ITEMS IN VARIOUS MD ACCN IN WING V AT ARTY CENTRE UNDER GE NASIK ROAD

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .

Demolition of cement concrete concrete(un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75 mm thick PCC 1:4:8,type D-2(using 40mm graded stone aggregate)as in sub base to flooring finished even and fair without using of extra cement all as directed vy EIC.

M&L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes cement plaster 1:6.

M&L for Non Skid ceramic tiles 7 to 8 mm thick for coloured tiles (square rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm , in floors etc, set and ointed in neat cement slurry and painted in coloured cement to match.

M&L for double charged vitrified ceramic tiles (any shade (light/dark) 8 to10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set & jointed in neat cement slurry and painted in white or coloured cement to match.

M&L for rendering 10mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces as a backing coats for fixing tiles.

M&L for glazed ceramic tiles coloured in vertical surface 300x600/300x450x6mm to 7mm thick set and joint in neat cement slurry and pointed in colour cement to match (coloured tiles).

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillers etc but including ashlar facings, dressed stone work and precast concrete articles

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

M&L for rendering 15 mm thick cement plaster other than fair faces of brick work or concrete surfaces in CM 1:6 rendering is to be finished even and smooth without using extra cement adding water proofing compound 3% by weight of cement (water proofing compound shall be measured and paid separately)

M&L for rendering 15 mm thick (1: 6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparing plastered surfaces and applying two coats of oil bound distemper over one coat of primer including preparatory work with including and applying 3mm thick wall care putty to distempering on surfaces of walls complete all as specified and directed by EIC.

S&F in repairs Angle cock 15mm bore Chromium plated fancy type with crutch or butterfly handle fixed to iron pipes.

Taking down PVC chowkat or frames with PVC shutters (without taking off shutters from the frame not exc. 1.5 Sqm each.

Providing & Fixing "RAJSHRI" Brand factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 63mm x 51 mm ( Moulded ) Single Rebated, made from Wood Polymer Composite ( Single Extruded Process ) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min.990 N ), Minimum Compressive Strength of 58 N/mm2 , Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and lenght, all as per specifications drawings as directed by the Engineer-In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company ( Hold Fast or Dash Fasteners shall be paid separately ) - For WC/Bathroom/ Toilet etc.

Providing “RAJSHRI” Brand Factory Made 25mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors.

S&F stainless steel barrel tower bolt 150 mm long

S&F stainless steel 150 mm handels

S & F in repair for vitreous china wash down WC Pan Pedestal pattern type including fixing.

S&F in repairs vitreous china wash basin Flat Bar 550x400mm excluding taps, chain and plug and porceilein stopper but incl brackets cutting for and pinning in ends of brackets or errecting stand, CP waste coupling of suitable size with long shank and bracket grouted in CM 1:2 in wall completed all as specified and directed..

S&F in repairs PVC valveless, syphonic action type 10 ltr capacity flushing cistern, lowlevel, white or coloured, with inlet, ball valve,float and handle including brackets.

S&F in repairs plastic seat cover coloured closed pattern with flat bottom and cover with mild steel chromium plated or alluminium hinging device.

S&F in repairs homemade single bowl Stainless steel kitchen sink 1.0 mm thick sheet for kitchen or laboratory with plugs, washers and wastes, including fixing cantilever brackets and conecting union to pipe, bowl size 600mmx450mmx250mm all as specified and directed

S&F in repairs Vitreous china squatting pan ,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repairs chromium Plated cast copper alloy pillar tap with capston heads fixed to iron pipes 15mm dia..

S&F in repairs bib tap 15mm bore Chromium plated fancy type with crutch or butterfly handle fixed to iron pipes.

S&Fin repairs brass chromium plated tublar towel rail 'D' shape 20mm dia 600mm long.

S & F in repair for chromium plated fancy shower rose with or without swivel joints of 65mm size

S&F PTMT grating of size up to 100mm (Minimum weight 25gms)

S&F in repairs PVC connection 15mm size with brass nut of 450mm long size

S & F in repair stop valve , chromium plated fancy typewith long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe of bore dia 15 mm or for union.

S&F in repair hand shower (Health faucet) 1 Mtr PVC tube with wall hook (CP)

Dismantling wooden boarding, any description fixed in any position with nails.

S&F 18/19 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work as in cub bord shutter shelves, kitchen Cup board shutter / cabinets, showcase book, shelves etc including teak wood lipping patty, 6 mm thick fixed with nails in repairs complete all as specified and directed

M&L for 18 mm thick PVC sheet prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side with white lamination including necessary locking device, catches suitable for kitchen cabinets and 4 mm thick PVC beading on all edges as in kitchen cabinets etc complete all as specified and directed.

S&F continuous (Piano) hinges MS bright finish electro galvanized – 30mm width of flap.

S&F staineless steel butt hinges 50mm size medium weight complete all as specified and directed

S&F in repair brass 40mm dia cupboard knob fixed with nut, screwed and washer polished.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each.

S&F Anodised powder coated aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat,Glazing clips,neopranes ribbin,rubber packing for fixing etc. complete all as specified and directed by Engr in Charge

S&F anodised powder coated aluminium Window/ventilators shutters, sliding type without sash, aluminium section weighiging 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, screws, suitable handles and suitable locking arrangement, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr in Charge

S&F Sheet glass ordinary quality 4.0 mm thick n. exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm dia with stainless steel wire stapples/GI screws/wooden beadings

Taking down of shutters of any description exc 1.00 sqm and n exc 2 sqm each shutter complete all as specified and directed

Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4 Sqm Each.

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, sup-plied and fixed to walls complete all as specified and directed.

S&F IInd class HW factory made 35mm thick plain framed panelled shutters (two panel) with lock rail, panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part I) Kiln, Seasoned and chemically pressure treated complete all as specified and directed.

S&F (IInd class hard wood) Glazed and ske- leton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F 100mm cold rolled mild steel butt hinges medium weight all as specified and directed

Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

Supply & Fixing 300 mm aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section etc complete all as specified and directed by EIC.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantlling of stone slabs & tiles of any decsription or thickness in floors, aprons etc laid, bedded & pointed in any mortar.

S & F hand cut cudappa stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Note: Screed bed layer measured seperately complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 20mm thick.

M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directd

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

Taking up or down 15 mm dia tubes galvanized iron and connections and fittings or removal from site as incl cleaning for refixing where directed complete all as specified and directed.

All as per Item No. 62.00 above but 20 mm dia

Re-fixing only 15 mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed

All as per Item No. 64.00 above but 20 mm dia

S&F 15 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor complete all as specified and directed.

All as per Item No. 66.00 above but 20 mm dia

S&F of 75 mm dia PVC(SWR) pipes single socketed,in any length with rubber ring joints fixed to walls

All as per Item No. 68.00 above but 110 mm dia

S&F of 75 mm dia PVC(SWR) bends of any radius

All as per Item No. 70.00 above but 110 mm dia

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

S&F figured glass ordinary quality 4.0 mm thick exc 0.5 sqm each pane as per instructions of manufacturers complete all as specifed and directed

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid conplast 421 and applying one coat each of nitoproof 100 & nitopro 120 on plastered surface.Rendering again 10mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC & CI/PVC pipes joint shall be filled/jointed with mixture of cement fine sand and nitoproof 130 and provided hole in the wall & fixed 600mm long 20mm dia spout light grade & 1:3:6 C2 filling ,floor area of wc upto 1.5Sqm etc complete all as specified and directed.

M&L for Repairing broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) and cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white wash or cement base paint to match the surface with existing work.

Supply only intergral water proofing compound

S&F in repairs tubular rail curtain rod/towel rail, 20mm dia, brass chroium plated complete all as specified and directed by EIC.

S&F for brass chromium plated brackets for 20mm dia tubular curtain rod/towel rail complete all as specified and directed by EIC.

Dismantling water tanks exc 500 & n exc 1000 ltr capacity and removing from site.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layer 1000 litre capacity, hoisted and fixed in position all as specified.

S&F ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms).

S&F Gun-metal, globe or gate valves, 20 mm bore with iron wheel head, screwed both ends for iron pipe and fixed

Dismantling asbestos cement (corrugated,semi corrugated)sheets in roof covering

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and making good to wall and roof joint.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete,conforming to Fe 410-W (Gde -E-250)quality -A drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F rolled mild steel Joist, channel, angle, flat sections, fixed independently, without connecting plates, or M S tubular sections etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe 290( E-165) all as directed by Engr-in-charge

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 68,685.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/S K. K. Construction (BID ID -3062153)

Srujan Associates (BID ID -3061498)

MAHIMA CONSTRUCTION (BID ID -3061522)

M/S SAMEER SUBHASH PATANI (BID ID -3062220)

sunway associates (BID ID -3062349)

SVT ENGINEERS AND CONTRACTOR. (BID ID -3061014)

Bidder Name

MAHIMA CONSTRUCTION

M/S SAMEER SUBHASH PATANI

SVT ENGINEERS AND CONTRACTOR.

M/S K. K. Construction

sunway associates

Srujan Associates

VISHAL CONSTRUCTIONS