Renovation/Repairing Major work at Rakholi, Tokarkhada, Dadra and Zandachowk high school Silvassa.

Amount

Providing material and labour for carry out Gate repairing work including fabrication cutting, welding, functioning etc. complete.

Providing material and labour for carry out Wooden cupboard, repairing, fixing wooden patti, ply 19mm, glass, Hardware fixture & fastening etc. complete.

Providing labour and material for carry out wooden Table, Chair repairing, fixing wooden patti, ply 19mm, Hardware fixture and fastening etc. complete

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Supplying and erecting Direct On-line Electronics Starter with 2-5/4-10/8-14/10-16 Amp. Rating relay (variable current setting) directly operated in totally insulated elegant enclosure and 18 Amp. Rating power relay with start - stop button for single phase operation up to 3 HP as per complete erected on P.W. Block with following features. Low voltage cut off below 140 V High voltage cut off above 280 V Overload protection Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II]

Supplying of single phase submersible pump set suitable for 100 mm size or more dia bore well having motor capacity and discharge as under with necessary panel box (c) Motor rating 2 HP (17 stage) pump having capacity of 106 LPM at 40 mtr head suitable for 32 mm dia. delivery pipe Cat.II

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee. [C] 50 Ltr / Hr with 250 psi 2 nos booster pump

Providing material and labour for freeze repairing work over all repairing, replace parts, over all servicing make it in functioning etc. complete.

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earthwire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in /flushed on wall/ceiling , complete with 6A Tissino Type ISI marked flush type switch / bell push and accessories erected on Metal / PVC Box covered with 3 mm thick PC(Polycarbonet) /Acrylic sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (d) partial pvc pipe and drops in oval conduit / pvc casing capping

Point wiring for looped PLUG with tissino type single pole ISI marked Switch and Socket erected with necessary connections erected on wooden /Metal/ PVC Box covered with 3 mm thick PC(Polycarbonet) /Acrylic sheet for open / concealed wiring for following size. [A] For 6 Amp.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (A) Tube Light with integral/ non-integral driver (d) 20-22 watts, Surge - 4KV, IP-20, 4 feet

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (B) LED Lamps integral type,cool white with PC diffuser suitable for B22 LAMP holder (b) 5 to 8 watts

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficiency> 85 lumens/watt . LED driver efficiency > 85 %. CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates) (A) Street Light (IP-65), Surge -4KV (d) above 36 to 48 watts

Providing and erected Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 c/s 1200 mm sweep complete, canopy and 30cms. Down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing. [ Make shall be approved by Engineer in charge ]

Providing material and labour for fixing in partitions 4mm thick medium hard board of approved quality including fixing to fames with screws etc, complete with 50mm x 12mm teak wood beading (Frames tobe paid separately)

Providing & Erecting following Shockproof tissino type accessories erected on 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal Box. erected on wall/ ceiling. (2) One no 3/5 pin 6 A Socket

Replacing condenser for ceiling fan/ Exhaust Fan / Pedestal Fan / Table Fan / Cabin Fan {Credit of D.M. retained by Agency.}

Providing & Erecting following Shockproof tissino type accessories erected on 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal Box. erected on wall/ ceiling. (1) One no Single pole 6 A Switch / Bell push

Providing and fixing 35 mm thick shutters for Doors, windows and clearstory windows including blackenamelled M.S. butt hinges with necessary screws. (A) Indian teak wood. (i) Fully Panelled.

Providing and fixing FRP of 28mm thick Fibre Glass shutter with 1.5 to 2.0 mm thick fire retardent grade FRP skin in depressed panel design having extra reinforcement on sides & edges & in Gel coat finish. The core of the shutter is to be filled up with injected retardent grade polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof ,weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws & alluminium S.S fixtures & fastenings & fastener sleeve.

Providing material and labour for 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for DARK shade

Providing material and labour for laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing material and labour for fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour

Providing material and labour for fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour

Providing material and labour for fixing glazed louvered glass windows and ventilators with teak wood frame 10cm. x 7cm. size including 3 coats of oil painting to wood work etc.complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm

Providing material and labour for fixing wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing material and labour for fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.

Providing material and labour for fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. (Inlet pipe)

Providing material and labour for fixing C.P. brass waste for washbasin or sink. (B) 40mm dia.

Providing material and labour for fixing screw down bib taps of following size.(C) Gun metal screw down bib tap. (i) 15mm dia.

Providing material and labour for fixing brass screw down stop tap.(A) 15mm dia.

Providing material and labour for fixing ball cock of approved. quality as directed.(A) Copper Metal (i) 25mm dia.

Providing material and labour for laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing material and labour for laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing material and labour for fixing brass screw down stop tap.(C) 25mm dia.

Providing material and labour for fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm.

Providing material and labour for supplying in standard length ISI mark rigid unplasticized PVC pipes suitable for potable water with ringfit joint including cost of rings, as per IS specification no.4985/1988 including all local and central taxes, transportation, freight charges, octrol, inspection charges, loading, unloading, conveyance to the departmental stores and including cost of jointing materials etc. complete Lowering, laying and jointing PVC pipes and specials of following class and diameter including cost of conveyance from stores site of works including cost of labour, material, except cement solvent giving satisfactory hydraulic testing as per ISI code (B) Test pressure 6 Kg/cm2 (i) with excise duty 110mm dia

Providing material and labour for supplying in standard length ISI mark rigid unplasticized PVC pipes suitable for potable water with ringfit joint including cost of rings, as per IS specification no.4985/1988 including all local and central taxes, transportation, freight charges, octrol, inspection charges, loading, unloading, conveyance to the departmental stores and including cost of jointing materials etc. complete Lowering, laying and jointing PVC pipes and specials of following class and diameter including cost of conveyance from stores site of works including cost of labour, material, except cement solvent giving satisfactory hydraulic testing as per ISI code (B) Test pressure 6 Kg/cm2 (i) with excise duty 160mm dia

Providing material and labour for fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [D] 32mm.

ISHWAR K ROKADE

vishal panchal

M.M.TANK