Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.9 LAccepted-AOC B 12 VISHAKARMA JYOTI SUBHASH LANE MALAD E MUMBAI 400097 | MUMBAI SUBURBAN | MAHARASHTRA | 400097 | L1 | Accepted-AOC Accepted | |
| 2 | L1₹37.6 LRejected-AOC | L1 | Rejected-AOC Not accepted |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
24 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer North Mumbai
Garrison Engineer North Mumbai Military Engineer Services Santacruz East, Mumbai
CERTAIN REPAIRS TO SECURITY WALL, PATH, HARDSTANDING, CLEANING OF SINTEX TANK AND OTHER CONNECTED WORKS AT INSIDE AND OUTSIDE AT KMC AND DEFENCE CIVILLIAN MD ACCN UNDER AGE BR SANTACRUZ
2023_MES_599054_1
8135/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer North Mumbai
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer North Mumbai
₹70,000
Yes
30 Jun 2023
27 May 2023
26 Jun 2023
27 May 2023
24 Jun 2023
12 Jun 2023
28 May 2023 - 3 Jun 2023
Amount
Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge.
M&L for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation, laying pipes etc or for shaft, walls, manholes, pier holes etc not exceeding 10 sqm on plan and not exceed 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge
Removing excavated material to a distance exceeding 1.5 Km but not exceeding 5 Km and depositing where directed by Engineer-in-charge complete all as specified and as directed by Engineer-in-Charge.
Material and labour for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.
Material and labour for walling random rubble, uncoursed, well bonded, bedded and solidly headed built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
All as per iten no.6 described here In before but except stone built in cement mortar 1:6
Material and labour for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought up to courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc.40mm complete all as specified and as directed by Engineer-in-Charge.
Material and labour for keyed pointing to random or polygonal rubble, uncoursed or brought up to course in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in roof kerbs, rounded or chamfered on edges in lintel upto 1.5m clear span, cills, steps, bands plinth course, string courses, lacing cources, parapet railing upto 60cm in height, copings, kneelers,apex stones, bed plates, kerbs not provided for in item 04028 of SSR, water troughs and the including weathering , slightly rounded or chamfered angles and throating complete all as specified and as directed by Engineer-in-Charge.
M&L for formwork to edges of concrete flats,breaks in floors, openings in concrete walls, floors and sides of RCC/PCC bamds in walls, horizontal or sloping and similar work all exceeding 20cm wide complete all as specified and directed by Engr-in-charge.
Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for pre-cast cement concrete block masonry 1:3:6, type C1 using 20mm graded stone aggregate, with solid blocks, exceeding 10cm in width and setting in cement mortar 1:6 etc complete all as specified and as directed by Engineer-in-Charge
Material and labour for 15mm thick rendering with cement mortar 1:6 on fair faces of brick or concrete surfaces and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge
Material and labour for broken glass coping on top of wall in cement mortar (1:3)complete all as specified and as directed.
Material and labour for preparing new surfaces of wall and applying two coats of cement base paint on wall surfaces over primer complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rolled mild steel in joist, channel, angle, or tee sections,fixed independently, without connecting plates conforming to Fe- 410w, Gde 250 quality B etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fix framed work such as grills, gratings, barred iron doors, ladders, brackets of chajjas etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165 all as specified and as per directed by Engineer-in-Charge.
Supply and fix 1.25mm thick mild plain steel sheet of black colour having tensile strength of 550 MPA with as in steel gates and similar works, cut to size, holes punched, including round headed screw, nailes, rivet and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded joints including bending or turning up, cladding to wall, fixed with self tapping screws including complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / TATA/INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / Essar.
Material & Labour for galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc as directed (each line of wire to be measured), complete all as specified and as directed by Engineer-in-Charge.
Supply and fix razor type concertina coil, SG hot galvanized spring tensile wire, 145 to 150 newton per sqmm, zinc coating 250-300 gm per sqm, dia of coil when unstreched 600mm, minimum No of coils 10 per running meter after laying, hot dipped razor ribbon tape of size 0.50 mm thick, 19mm wide before wrapping on central core wire, fixed with 1.66 mm thick GI clips 25 Nos, per running metre and special nut bolts for holding 'Z' coils together and extra two rows parallel wire of 10 gauge complete all as specified and as directed by Engineer-in-Charge Note :- The length shall be measured along the centre-line of the perimeter of fencing.
Supply & Fix mild steel angle iron work for Y shape brackets, with cutting to shape, drilled holes for wire including embedding in concrete and securing etc all as specified and as per directed.
Material and labour for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer with all necessary staging, scaffolding etc as required complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints / Berger paints / Shalimar paints / Dulux
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as directed by Engineer-in-Charge.
Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing path and finishing the surface even and fair without using extra cement all as specified and as directed.
Material and labour for 75mm thick plain cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in floor, finishing the surface with even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for slab thickness of concrete slab 100mm complete all as specified and as directed by Engineer-in-Charge.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing),depositing debris out side MD land complete all as specified and as directed by Engineer-in-Charge.
Material and labour for chequered cement concrete tiles 20 Cm x 20 Cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match in floorcomplete all as complete all as specified and as directed by Engineer-in-Charge.
Material and labour for machine pressed precast concrete interlocking paver block lacquer finish of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment including 25mm thick crushed stone sand cushioning including watering and consolidation below paver block cushioning complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur
Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, in hard/dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m and depositing where directed and making good the disturbed surface complete all as specified and as directed by Engineer-in-Charge.
Material and labour for cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation / mass concrete all as specified and as directed.
S&F mild steel round bars 10mm dia and over as in rungs, cut to length bent to shape required including cranking hooking ends etc complete all as specified and as directed by Engineer-in-Charge
Supply and fix flat iron including fixing clamps or support to chain link fencing, wind ties and fixed to post with all fittings as directed by Engineer - in- Charge.
Supply and fix in repairs Chain link fencing of size 50x50mm mesh size made of 10 gauge GI wire, streched and fixed to fencing post all as specified and directed by Engineer-in-Charge.
Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm & not exceeding 10cm long, dai of sank 16mm all as specified and directed by Engineer-in-Charge..
Demolition of reinforcement cement concrete of any descriptionand in any position not otherwise specifically provided for woll (reinforcement cut as required to facilitate demolition including removing debis out side MD land complete all as specified and directed by Engineer-in-Charge.
Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge
Taking down cement plaster of any description on brick or stone walls or in concrete surfaces as in drain etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge
Material and labour for 10 mm thick plastering in cement mortar (1:4) on internal wall surface including dubbing out plaster in cement mortar (1:6) of any thickness finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 15mm thick rendering with cement mortar 1:4 including dubbing out plaster in cement mortar (1:6) of any thickness on external wall surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge
Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith
Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith
Supply and fix mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith
Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. Make : Jaquar (Essco)/Prayag / Seiko
Supply and fix in repairs, concealed gate valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar (Essco)/Prayag / Seiko
Supply and fix in repairs pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : Jaquar (Essco)/Prayag / Seiko
Dismantling PVC water tank exceeding 250 ltr but not exceeding 500 ltr capacity and removing to store all as specified and directed by Engineer-in-Charge.
Dismantling PVC water tank exceeding 500 ltr but not exceeding 1000 ltr capacity and removing to store all as specified and directed by Engineer-in-Charge.
Dismantling PVC water tank exceeding 1000 ltr but not exceeding 2000 ltr capacity and removing to store all as specified and directed by Engineer-in-Charge.
M & L for rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 500 litres capacity with inlet & outlet connections, bends, sockets etc, hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Sintex/Polycon/infra/Rotex
M & L for rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 1000 litres capacity with inlet & outlet connections, bends, sockets etc, hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Sintex/Polycon/infra/Rotex
M & L for rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 2000 litres capacity with inlet & outlet connections, bends, sockets etc, hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Sintex/Polycon/infra/Rotex
Supply and fix in repairs gun metal gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/ Essco/Prayag
Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 15mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 142 gms) Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet
Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 20mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 142 gms) Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet
Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 25mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 142 gms) Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet
Material and labour for Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) for 25mm bore dia complete all as specified and us directed
Material and labour for removing vegetation, trees, plants and shrubs etc in any position by cutting hole into brick wall / concrete surfaces (for removing the roots of trees/plants) area not exceeding 0.50sqm each and using acid to burn the all roots of tree/plants and making good disturbed surfaces with cement concrete 1:2:4 type B1, using 20mm graded stone aggregate mixed with and including water proofing compound @ 3% by weight of cement and including making good adjoining surface with existing finishes all as specified and as directed by Engineer-in-Charge. Note: The unit quoted rate shall be deemed to include WPC & necessary scaffolding as required.
M&L for cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. exc 250 and not exc. 500 ltrs. With bleaching powder etc. and refixing the tank in same position including form work and saftey belts up to the height of bldg.complete all as specified and directed by Engineer-in-charge.
M&L for cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. exc 500 and not exc. 1000 ltrs. With bleaching powder etc. and refixing the tank in same position including form work and saftey belts up to the height of bldg.complete all as specified and directed by Engineer-in-charge.
M&L for cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. exc 1000 and not exc. 2000 ltrs. With bleaching powder etc. and refixing the tank in same position including form work and saftey belts up to the height of bldg.complete all as specified and directed by Engineer-in-charge.
Demolition of cement concrete / cement lime concrete / mud faska (unreinforced in roof and terrace other than ground floor) any description and removal of rubbish to outside MD land etc complete all as specified and as per directed by Engineer-in-Charge.
Material and labour for providing plain cement concrete 1:2:4, type B1 using 20mm graded stone aggregates mixed with water proofing compound at the rate of 2% by weight of cement as in levelling course of roof, laid in slope as required, finished even and fair etc complete all as specified and as directed by Engineer-in-Charge. Note: Water proofing compound will be measured and paid separately
Material and labour for APP modified waterproofing treatment over existing RCC roof slab with following specification complete as directed by Engineer-in-Charge :- (a) Applying oil bound bituminous primer @ 0.4lit/Sqm of density 0.87-0.89Kg/lit of 250C on the prepared dry roof surface. (b) Laying 4mm thick APP membrane weight not less than 3.90 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. (c) Over the membrane provide 20mm thick screed in cement mortar 1:4 mixed water proofing compound at the rate of 2% by weight of cement (d) Provide 300 x 300 x 20mm thick machine pressed cement concrete tiles with minimum thickness of joint (not exceeding 3mm) are thoroughly filled with water proof polymer based joint mortar. Note : (i) The tiles shall be laid to the slaope to avoid stagnation of water. Make: STP Ltd/ Texsa india ltd/Tiki Tech
Supply only integral water proofing compound complete .
Note: Deduct Credit for demolished / dismantled material of Rs (-)97,345.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'
Chaudhary Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .