Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 |
Tender Value
₹8.3 L
EMD Value
₹16,586
Closing Date
18 Jan 2021, 12:00 pmClosed
Executive Engineer
Executive Engineer, Water Supply and Sanitation Division, Kapurthala. H.No.5, Tagore Nagar, Near Jalandhar Bye Pass Kapurthala
Providing improved access to water through household connections in existing water supply scheme Bhulla Rai Block Phagwara Distt. Kapurthala. Under PRWSSIP 2a(i)
2020_WB_58365_1
2020-21/PRWSSIP2a(I)/Bhulla Rai
Open Tender
Civil Works - Water Works
Item Rate
60 days
Water Supply and Sanitation Division
Please refer Tender documents.
3 documents required · 3 mandatory
₹100
₹16,586
7 May 2021
1 Jan 2021
18 Jan 2021
1 Jan 2021
18 Jan 2021
1 Jan 2021
Amount
Replacement of Control Panel
Replacement of Control Panel (25.00 BHP)
Plinth Protection of OHSR 200000 ltr
Construction of plinth protection around OHSR with masonry toe wall & inside earth filling with lead 5 kms. complete in all respect
Disinfection Unit Providing Installing, testing & commissioning one no. Electronically actuated, Diaphragm operated, Metering System, Chemical Dosing, Chlorinator, Suitable for delivering 0.5 to 6 Litres fo Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg. cm2 and suction lift not less than 1.5 m, as per DWSS standard specifications
Connection with existing PVC Pipe including cost of tee earth work in excavation & back filling complete in all respect.
Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects
House Service Connection for Old Pipe Line
Providing proposed water connection to household up to wall with providing, laying, jointing, testing GI pipe lines 15mm i/d = 2.50 mtr B-Class, (Above GL), Prov. & fixing MDPE pipe 15mm i/d with speicals 2.00 mtr (Below GL), including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading and testing in trenches in ground and ISI marked 15mm i/d GM furrule as per IS:2692 and 3" i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make complete in all respects.
Providing, Laying, fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenhes to correct alignment and gradients, cutting, jointing and testing complete as per specifications. For more than 3 mtr street width Mechanically Excavation including specials
63mm o/d pipe of 6 kgf. / sqcm
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge).
Class PN-1 as per ISI
80mm i/d Sluice valave flanged
100mm i/d Sluice valave flanged
150mm i/d Sluice valave flanged
Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department
Size 0.6 m x 0.6 m
Size 0.9 m x 0.9 m
Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting and including restoration of roads to orginal Position
63mm o/d pipe of 6 kgf. / sqcm
Providing fixing & jointing G.I Couplings (of approved make with the approval EIC) as per IS:1879 in G.I. pipe lines size 15mm i/d G.I Union including Labour for cutting threading complete in all respects.
House Service Connection for New Pipe Line
Providing proposed water connection to household up to wall with providing, laying, jointing, testing GI pipe lines 15mm i/d = 2.50 mtr B-Class, (Above GL), Prov. & fixing MDPE pipe 15mm i/d with speicals 2.00 mtr (Below GL), including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading and testing in trenches in ground and ISI marked 15mm i/d GM furrule as per IS:2692 and 3" i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make complete in all respects.
Carriage of Material such as Bajris Sand upto lead 126 km complete in all respect
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .