SPECIAL REPAIRS TO BLDG NO. 3 STN OFFRS MESS COMPLEX AT FORT AREA NAGPUR.

Amount

Dismantling of asbestos cement/translucent (corrugated / semi-corrugated etc.,) sheets in roof coverings including ridges complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Dismantling of wall and ceiling board (fibre, pulp, insulation etc.,) or insulation board, slabs, blankets, any thickness including cover fillets complete all as specified and as directed.

Dismantling of timber scantlings in frame work 40 Sqcm and over in section in any position, unframed work, complete all as specified and as directed

Taking down cement plaster of any description on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

Taking down door/window frames including shutters (without taking of shutter from the frames) n. exc 1.50 Sqm each complete all as specified and as directed.

Taking down door/window frames including shutters (without taking of shutter from the frames) exc 1.50 Sqm and not exc 4 sqm complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm and but not exc 2.00 Sqm each, complete all as specified and as directed.

Dismantling of brick work or stone/boulder masonry built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles complete all as specified and as directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed

Dismantling of PVC (SWR) pipes (110mm/75mm dia) jointed in cement mortar and taking out from trenches/on walls including all fittings such as bands, branch pieces, traps etc., complete all as specified and as directed.

Demolition and breaking up drain pipe 150mm dia (Sali glazed ware, AC or reinforced concrete ) set in cement mortar, complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

S&F Structural rolled mild steel work as in roof trusses (framed), purlins, crane gantries, rail and fastenings and having buckets framing ( beam, tee, angle, channel or flat section) including distances pieces, cleats etc., including special shaped washer etc. conforming to IS 116-1979 grade Fe-290 (Gde E-165), complete all as specified and as directed.

M&L for IInd class hard wood in plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

Preparing surfaces of wood and wood based materials, new or old of any description and girth not otherwise described and treated with cresoat oil, complete all as specified and directed.

S&F Pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 (Using old size brick) complete all as specified and as directed.

M&L for Rendering 15 mm thick in CM 1:4 on fair faces of brick masonry using liquid water proofing compound as per manufacture instruction, finished even & smooth without using extra cement, complete all as specified and as directed. Note: WPC shall be measued and paid seperately under respective item.

Supply only Liquid integral Water proofing admixture. Make: Pidilite/ Fosroc/water seal/Acco proof/Cico

M&L for Rendering 15 mm thick in CM 1:6 on fair faces of brick masonry or concrete surfaces, finished even & smooth without using extra cement complete all as specified and as directed.

Material & labour Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No. 24 above, but 8mm and over upto and including 10mm dia TMT bars as in stirrups, spacers and binders.

M&L for cement concrete 1 : 2 : 4 Type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apes stones, bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square or rectangular) polished area of each tile n.exc. 0.36 Sqm in floors etc., set & jointed in neat cement slurry and pointed in coloured cement to match over and including 20 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 6-7mm, on vertical surface such as skirting / dado set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed.

M&L for Edge cut/joint free colour ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc set & jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete all as specified and as directed.

M&L for machine cut Cudappah stone slab flooring 20 to 25mm thick polished one side for kitchen platform, laid over and including 15mm thick cement mortar 1:6 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and as directed.

M&L for machine cut, pre-polished granite stone slab of any shade as approved by GE as in flooring 20 mm thick, laid over and including 20mm thick cement mortar 1:6 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc if required to be carried out at site after fixing of pre-polished granite stone in position, to match the surface upto required pre-polished standard, as in repairs, complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, as in steps, cooking platforms etc., and similar situations, complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing all as specified and as directed.

Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

M&L for IInd class hard wood in plain, solid straight Chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

Supply & fix 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type of both faces, covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.

Supply & fix 30 mm thick 2nd class HW for window glazed and Skelton shutters open rebated with sash bar and prepared to receive wire gauge edges cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part I section and clause 8.20 (a) fitted to Chowkats or frames of any numbers of panels complete all as specified and as directed.

S & F 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work fixed to panelled shutter to received the lamination sheet complete all as specified and as directed.

Supply & fix 12mm thick prelaminated particle boards, interior grade, prelaminated one side decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame-work, complete all as specified and as directed.

Supply & fix 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with one decorative face veneers on one side, as in shelves, fixed with screws to timber frame work, complete all as specified and as directed.

M&L for melamine polishing on surfaces of any description, width or girth including cleaning and preparing the surface, complete all as specified and directed.

M&L for plain fillets 2nd class hard wood exc 6 Sqcm, but not exc 13 Sqcm square, rectangular or triangular in section, clean swan, secured with nails, including bull nosed splayed, chamfered or round on one edge or face, complete all as specified and as directed.

Supply & fix 100 mm long butt hinges cast brass with mild steel hinge pin and fixed with screw / welded to frames etc complete all as specified and as directed.

S & F 150 mm size extruded brass handles, fabricated type polished etc complete all as specified and as directed.

S & F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolls and fixed complete all as specified and as directed.

Supply & fix 150 mm Brass body and tongue with hard drawn steel spring floor door stopper fixed, complete all as specified and as directed.

S & F 200 mm long brass barrel towel bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

Supply & fix 100 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 etc, complete all as specified and as directed.

Supply & fix 125 mm long Aluminium handles, fabricated type anodised, complete all as specified and as directed.

Supply & fix 150 mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and as directed.

Supply & fix 300 mm long aluminium alloy, anodised, sliding bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and as directed.

S&F double Curtain rod with a telescoping and decorative type double rod brackets to fit both rod and mounting hardware modular type complete all as specified and as directed.

Supply & fix aluminium anodised powder coated frame for door, windows Ventilators with one or more rebates, including necessary joining cleats/glazing clips/building hardware etc., complete all as specified and as directed.

S&F anodised aluminium door shutters/partition aluminium section weight 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles - 2 Nos in each door, hinges anodised aluminium snap beading screws etc., complete all as specified and as directed

Supply and fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement and with aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications (Make: Grill No. 20 of 'DECO GRILL' or equivalent) complete all as specified and as directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint(Make of Aluminium Sections powder coated : Jindal or equivalent of INDAL and as approved by GE).

Supply & fix GI framework for seamless false ceiling of size 600mm x 600mm comprising of hot deep galvanized powder coated perimeter angle of size 24 x 24 x 0.43 mm thick fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, main runner Tee section 0.4mm thick with height 38mm & width 24mm and cross T of size 29mm height, 24mm width and 0.4mm thickness, 1200mm centre to centre with GI cleat and steel expansion fasteners, including drilling holes for 4mm dia GI wire suspender and clips etc., hangers 6mm dia GI (upto 1200mm length) adjusting level, fixed to roof complete as per manufacturer's recommendations, with and including non-asbestos designer fibre cement building boards of size 595 x 595 x 6mm thick fixed or laid/inserted to GI frame work with screws/clips as in ceiling laid flat or sloping complete all as directed. Note: (i) Ceiling boards shall be deemed to be included in the quoted rate. (ii) The grid system shall be as per specification of make as specified and directed.

S & F MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F steel window with side hung shutters (glaze & gauze shutter) including projecting or box type hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and as directed.

Supply & fix Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, as in gauge doors/window/ventilators, complete all as specified and as directed.

M&L 10 to 12 mm thick froasted toughened glass fixed to door or partition or any other location including brackets supports, handles and other accessories as required, complete all as specified and as directed.

M&L 5.5mm thick tinted glass fixed with necessary rubber gasket and aluminium beading, complete all as specified and as directed.

S&F 3mm thick figured glass fin headed type in square not exc. 0.50 Sqm in each pane and fixed with oil putty or as required, complete all as specified and as directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply & fix GI tubing 15 mm bore medium grade including all fittings such as bends, elbows, tees, union etc., and fixed to wall/ceiling or laid in floors complete all as specified and as directed.

Supply & fix GI tubing 20 mm bore medium grade including all fittings such as bends, elbows, tees, union etc., and fixed to wall/ceiling or laid in floors complete all as specified and as directed.

Supply & fix Vitreous china wash down couple closet bowl WC with UF seat cover, hinges, accessories set etc., of size 640 x 370 x 760mm, white and flushing cistern with fittings, including fixing bolts and flush pipe 'P' or 'S' trap including jointing, complete all as specified and as directed. Make: Jaquar (Cat No. FNS-WHT-40751S & FNS-WHT-40201) or equivalent and as approved by GE

Supply & fix Vitreous china table top wash basin of size 420 x 500 x 190mm of white colour, excluding taps, and waste pipe and fixing of pillar tap, PVC connection waste pipe, coupling, etc., complete all as specified and as directed. Make: Jaquar (Cat No. FNS-WHT-40931) or equivalent and as approved by GE.

S & F Towel ring square fixed to walls with chromium plated (CP) brass screws etc complete all as specified and directed. Make: Jaquar (AKP-35721P) or equivalent and as approved by GE.

S & F Single towel rail 600mm long with lower hanger fixed to walls with chromium plated (CP) brass screws etc., complete all as specified and directed. Make Jaquar (AKP-35711P) or equivalent and as approved by GE.

S & F Soap dish holder fixed to walls with chromium plated (CP) brass screws etc complete all as specified and directed. Make: Jaquar (AKP-35731P) or equivalent and as approved by GE.

S & F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws etc complete all as specified and directed. Make: Jaquar (AKP-35751P) or equivalent and as approved by GE.

S & F Soap dispenser with glass bottle fixed to walls with chromium plated (CP) brass screws etc complete all as specified and directed. Make: Jaquar (AKP-35735P) or equivalent and as approved by GE.

S & F Tumbler Holder fixed to walls with chromium plated (CP) brass screws etc complete all as specified and directed. Make: Jaquar (AKP-35741P) or equivalent and as approved by GE.

S & F Waste coupling 32mm oilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws etc complete all as specified and directed. Make: Jaquar (AKP-35751P) or equivalent and as approved by GE.

S&F Two-way bib cock with wall flange fixed to walls with chromium plated (CP) brass screws etc., as in repairs, complete all as specified and directed. Make: Jaquar (Kubix Prime Cat No.KUP-35041PM) or equivalent and as approved by GE.

S&F Angular Stop Cock with wall flange fixed to walls with chromium plated (CP) brass screws etc., as in repairs, complete all as specified and directed. Make: Jaquar (Kubix Prime Cat No.KUP-35053PM) or equivalent and as approved by GE.

S&F Single lever wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges, fixed to walls with chromium plated (CP) brass screws etc., as in repairs, complete all as specified and directed. Make: Jaquar (Kubix Prime Cat No.KUP-35117PM) or equivalent and as approved by GE.

S&F Overhead shower 150x150mm Squarel pipe shape single flow (ABS body chrome plated with gray face plate) with Rubit cleaning system, as in repairs, complete all as specified and directed. Make: Jaquar Cat No.OHS-35495PM or equivalent and as approved by GE.

S&F Hand Shower (health Faucet) with one meter long easy flex tube in chrome finish and wall hook fixed to walls with chromium plated (CP) brass screws etc., as in repairs, complete all as specified and directed. Make: Jaquar Cat No.ALD-565 or equivalent and as approved by GE.

S&F Towel Rack 600mm long with lower hangers, Stainless Steel fixed to walls with chromium plated (CP) brass screws etc., as in repairs, complete all as specified and directed. Make: Jaquar Cat No.ACN-1181S or equivalent and as approved by GE.

S&F Glass Shelf 600mm long fixed to walls with chromium plated (CP) brass screws etc., as in repairs, complete all as specified and directed. Make: Jaquar Cat No.ACN-1171N or equivalent and as approved by GE.

S&F Corner Glass Shelf (with Brackets) fixed to walls with chromium plated (CP) brass screws etc., as in repairs, complete all as specified and directed. Make: Jaquar Cat No.ACN-1173 or equivalent and as approved by GE.

S&F Corner Shower basket fixed to walls with chromium plated (CP) brass screws etc., as in repairs, complete all as specified and directed. Make: Jaquar Cat No.ACN-1175N or equivalent and as approved by GE.

S&F Waste coupling 32mm size half Thread with 80mm hight chromium plated (CP) with long screwed shank and fly nut, flanged end complete, as in repairs, complete all as specified and directed. Make: Jaquar Cat No.ALD-709 or equivalent and as approved by GE.

Supply & fix 32/40mm waste fitting, brass CP for glazed ware sinks, basins etc with long screwed shank and fly nut, flanged end bedded in re lead cement and other end fix etc., as in repairs, complete all as specified and as directed.

Supply & fix 15mm bore Bib tap, cast copper alloy chromium plated, fancy type, with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed, as in repairs, completed all as specified and as directed.

Supply & fix stainless steel sink 1.00 mm thick for kitchen or laboratory with plugs, washer and PVC waste 32/40mm dia including bedding in cement mortar on to dwarf wall or including fixing cantilever cast iron brackets and connecting union to waste pipe overall all size 495mm x 420mm bowl size 410mm x 330mm x 160mm, as in repairs, complete all as specified as directed. Make Nirali/Prayag.

S&F rotational moulded polyethylene double layered water storage tanks (cylindrical or vertical with closed top) 1000 liter capacity hoisted and fixed in position, all as specified in SSR Part-I, with and including dismantling of old unserviceable water storage tank of any capacity, complete all as specified and as directed.

Supply & fix 40mm dia low density polyethylene pipe (LDPE) of pressure rating 6 Kg/Cm2 laid in trenches, completed all as specified and as directed.

Supply and fix PVC connection 15 mm dia with PTMT nuts of 600 mm long , as in repairs, complete all as specified and as directed.

Supply and fix Grating Dome 100mm dia of PTMT (minimum weight 25 gms), as in repairs, complete all as specified and as directed.

Supply & fix Cast Iron floor trap 75 mm bore with and including grating, jointing to waste pipe fixed in cement concrete 1:2:4 type B1, as in repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore pipe single socketed in any length with rubber ring joints, laid in trenches or in floors, with all necessary fittings etc., complete all as specified and as directed.

S&F PVC (SWR) 100mm bore pipe single socketed in any length with rubber ring joints, laid in trenches or in floors, with all necessary fittings etc., complete all as specified and as directed.

S&F PVC (SWR) 75mm bore bends of any radius with access doors, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore bends of any radius with access doors, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore vent cowl, complete all as specified and as directed.

S&F PVC (SWR) 'P' trap 110/110 mm bore, complete all as specified and as directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 metre depth for foundation, laying of pipes etc., and getting out in Soft/Loose soils, complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

M&L for Salt Glazed Stone Ware drain pipe 150mm dia Grade 'A', laid in trenches, jointed and testing, complete all as specified and as directed

M&L for Cement concrete (1:3:6) type C-2 (by using 40mm graded stone aggregate) as in concrete bed to drain pipe for SGSW pipe150mm dia, including packing under and haunching against the sides of pipe after they are laid and tested, complete all as specified and as directed

Material & labour for preparation of new or previously untreated surfaces of steel or iron works of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over coat of red oxide primer complete all as specified and as directed.

Material & labour for preparation of old treated surfaces of steel or iron works of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and as directed.

Material & labour for preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over coat of pink primer complete all as specified and as directed.

M&L for preparation of new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper over a coat of Birla white care putty, complete all as specified and as directed.

M&L for complete removal of existing treatment of walls, preparation of surfaces and applying two coats of oil emulsion distemper over a coat of Birla white care putty, complete all as specified and as directed.

M&L for preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement based paint, complete all as specified and as directed.

M&L for complete removal of existing treatment, preparation of surfaces of walls & applying two coats of cement base paint over a coat of alkali resistant priming paint as primer of approved make complete all as specified and as directed.

E/M Works:- (Internal Electrification) Taking down unserviceable point wiring with copper/aluminium conductor cable of (light, fan, plug and power plug point) complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fittings, regulator etc, and making good disturbed surfaces of walls/floor etc to match with existing surfaces including white/ colour washing/distempering all as specified and as directed.

Taking down carefully unserviceable sub main wiring of any size/capacity and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

Taking down old unserviceable sheet metal enclosure with MCB's ,main switch, etc., and making good the disturbed surfaces of wall all as specified and as directed.

Material and labour for concealed point wiring 1100 volt grade single core PVC FRLSH insulated and unsheathed cable with multi-stranded copper conductor 1.50 Sqmm drawn in with and including electrical grade PVC conduit not less than 20 mm dia with IS 9537 (Part-III) 1983 marking, medium grade concealed on wall/ceiling as per site requirement including PVC FRLSH insulated and unsheathed cable with copper conductor of size 1.50 Sqmm as earth conductor and modular boxes sunk on wall for mounting modular switches, switch sockets. fan regulator, etc including modular cover with frame of any size, including making good the disturbed surfaces complete all as specified and as directed for:- (a) One light point controlled by one No. one way switch. Note: Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. Make: Cable:- Polycab/Havells/Anchor/Finolex PVC Conduit:- Polycab/Superplast/Finolex Modular Box:- Legrand/Anchor

(b) One Ceiling/Exhaust fan point controlled by one No. one way switch and regulator.

(c) One 3 pin 6 Amps socket out let point on the same board with other switches .

(d) One 3 pin 6 Amps socket out let point on independent board.

(e) One bell/buzzer point controlled by one push button.

All as per item No. 114 here in before, but wiring with 2.5 Sqmm multi stranded copper conductor cable and earth wire with copper conductor cable of size 2.5 Sqmm for 15 Amps power plug point.

M&L for sub main wiring 1100 volt grade single core FRLSH PVC insulated & unsheathed cable with multistranded copper conductor drawn in electrical grade PVC conduit not less than 20mm dia marking medium grade concealed in wall/ceilling including FRLSH PVC insulated unsheathed earth wire with copper conductor of same size as of phase and neutral wire complete all as specified and making good distrubed surfaces.(Cable make: Polycab, Havells, Finolex, L&T, Legrand) (PVC Conduit make: Polycab, Superplast, Finolex) Note: accessories for point/sub main wiring like PVC junction box, bend, Tee, Elbow shall be of same make. (a) 2 x 4.0 Sqmm + 1 x 4.0 Sqmm earth wire.

(b) 2 x 6.0 Sqmm + 1 x 6.0 Sqmm earth wire.

Supply and fix Recessed mounted warm type LED fittings 36 W 600 mm X 600 mm panel having system lumen output 3600 lumen, fixture comprises of CRCA sheet metal body powder coated in white, the LED clustters are assembled in the body & special high translucent frosted diffuser is used for uniform glare-free light distribution rated voltage 240 V, 50 Hz, as in repairs, Complete all as directed by Engineer-in-Charge. Make: Wipro/ Philips/ CG LCTLZRNE-36-WW.

Supply and fix Recessed mounted warm type LED fittings 18/20 W LED light having system lumen 2000 lumens & made up of Co-Extruded conductive plastic material & High optically efficient plastic diffuser, input working rated voltage 240V, 50 Hz, as in repairs, complete all as directed by the Engineer-in-Chrge. Make: Wipro/ Philips/ CG LCDN-18-CDL/TL/WW

Supply and Fix Highly durable surface mounted warm type 18/20 watts LED Batten/ surface constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed. Make: CG/ Bajaj/ Philips.

Supply and Fix Highly durable surface mounted mirror light warm type 14 watts LED batten / surface constructed of fire retardent engineering grade extruded plastic and decorative end cap complete with tube rod, driver including 3 core 1.0sqmm opper conductor cable for connection and accessories all as specified and directed. Make: CG/ Bajaj/ Philips

Supply and fix in repairs building security light in repairs LED 18/25 W with lumen O/P 2000 with driver with rated voltage 240 V, 50Hz, including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape includng FI clamps nut bolts etc complete all as directed by the Engineer-in-Charge. Make and model : BRLEP 20 W LED V2 CG cat No. LSTS-25-CDL, Surya.

S&F modular switch 1 way 6 Amps 250 Volts AC, 1 Module, Make: Legrand/Hager/Crabtree/schneider/siemens

S&F modular socket 2/3 pin combined 2 module 6 Amps 250 Volts AC. Make: Legrand/Hager/Crabtree/schneider/siemens

S&F modular switch 1 way 16 Amps 250 Volts AC, 1 Module, Make: Legrand/Hager/Crabtree/schneider/siemens

S&F modular socket 2/3 pin combined 2 module 6/16 Amps 250 Volts AC. Make: Legrand/Hager/Crabtree/schneider/siemens

S&F modular bell push 1 way 6 Amps 250 Volts AC, 1 Module, Make: Legrand/Hager/Crabtree/Schenieder/Siemens

S&F modular ceiling fan regulator step type 120W-2 module. Make: Legrand/Hager/Crabtree/Schenieder/Siemens

S&F for modular switch, double pole, one way 32 amp 2 module 250 volts AC suitable for modular switch boxes, Make: Legrand/Hager/ Crabtree/ Schenieder /Siemens

Supply & fix ceiling rose ,3 phase /PVC/polycarbonate ,isolated body surface, all as specified and as directed. Make: Legrand/Crabtree/Anchor

Supply & fix electric bell, ding dong AC 230 volts, single pole, complete all as specified and as directed.

Supply & fix MCB DB TPN 4 Way, 415 Volts, with 200 Amp rated bus bar flush/surface mounting double door type, complete all as specified and as directed. Make: Legrand/L&T/Schenieder/Siemens

Supply & fix MCB DB SPN 8 Way, 240 Volts, with 200 Amp rated bus bar flush/surface mounting double door type, complete all as specified and as directed. Make: Legrand/L&T/Schenieder/Siemens

Supply & fix MCB TPN 63 Amps, breaking capacity 10 KA, 415 Volts, complete all as specified and as directed. Make: Legrand/L&T/Schenieder/ Siemens

Supply & fix MCB SPN 6 to 32 Amps, breaking capacity 10 KA, 240 Volts, complete all as specified and as directed. Make: Legrand/L&T/Schenieder /Siemens

Supply & fix MCB SP 6 to 32 Amps, 240 Volts,, breaking capacity 10 KA all as specified and as directed. Make: Legrand/L&T/Schenieder/Siemens

S&F Ceiling fan 1200mm sweep 230 Volts, 50Hz and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and as directed. Make: Bajaj/CG/Orient/Havells.

S&F Wall mounted air circulator fan 450mm sweep 230 Volts, 50Hz and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and as directed. Make: Bajaj/CG/Orient/Havells.

S&F Exhaust fan 300mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and as directed. Make: Bajaj/ CG/ Havells.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth lead wire 4.00mm dia by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40mm bore, medium grade 7.5m long as applicable and as per plate No. 3 of SSR Part-I 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover or reinforcement with 8mm TMT bars at 100mm c/c both ways with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f) 15mm nominal bore medium grade GI protection pipe upto 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 45,271.00 /- ]

VIJ ASSOCIATES

SHUB CONSTRUTION

M/s B S Jain

khushal constructions

Bidder Name

Meet Road Lines

SHUB CONSTRUTION

khushal constructions

M/s B S Jain

VIJ ASSOCIATES