ICHP- Fabrication and dismantling the existing rusted and damaged PCRD cable guide arrangement and erection of cable guide arrangement for Stacker-I II and Reclaimer-I II machines PCRD cable centre pits.

Charges for Fabrication of centre pit straight main support ‘ L’ angle of unequal sides of size 90mm X 60mm X 2100mm length X 8mm thickness , fabrication of 2 Nos of cable guide curve of ‘T’ shape welded MS flats of size 40mm X 3000mm length X 8mm thick and 63mm X 3000mm X 8mm thickness and joining the main support straight angle and cable guide curved ‘T’ shaped flats by welding and fixing 2 Nos of square MS flats of size 240mm X 150mm X 8mm at either sides of the bottom of the curved ‘T’ flats as per drawing including all cutting, grinding, welding and machining works. Including T&P hire charges &Consumables.

Charges for fabrication of cable winding drum of MS material of size 850 mm dia, 280mm length and thickness of 8mm and fixing the cable winding drum with the cable guide structure using two Nos. of MS angles of size 55mmX55mmm of length 2m and 1m including all cutting ,welding, grinding and machining works.

Charges for Painting of the whole guide arrangement: Complete painting of the whole cable guide arrangement with one coat of red oxide paint and two coats of synthetic enamel paint.

Charges for Dismantling the rusted and damaged existing PCRD cable guide arrangement in centre pit of stacker - I&II and Reclaimer - I&II using gas cutting set and erection of the new cable guide arrangement structure with the required masoning work including deglanding & releasing of the 3½ X 25sq.mm PCRD flexible reeling cable from the PCRD junction box prior to dismantling of the existing damaged cable guide arrangement and relaying, reglanding and retermination of the above said reeling cable after erection of the new cable guide arrangement including transportation of fabricated cable guide arrangement from contractor’s premises to work spot.

Charges for overhauling and inspection of pulley bearings and replacement if necessary in head pulley/head snub pulley/ drive pulley/ tail pulleys/take up pulleys/ bend pulleys in Conveyor-13A,14,15, and 16 including arresting the conveyor belt, lifting the counterweight and normalizing the system after bearing overhauling, trial operation including cost of consumables and T&P hire charges etc., complete.

BIRUNTHA ENGINEERING CONSTRUCTION