Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-AOC | L1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L2₹6.0 L+₹55,182 (10.0%)Rejected-Finance 58 1ST FLOOR PATEL NAGAR BATHINDA | BATHINDA | BATHINDA | PUNJAB | L2 | Rejected-Finance Higher side quoted amount | |
| 3 | L3₹6.3 L+₹77,476.24 (14.1%)Rejected-Finance LADO CHACK COLONY PO TEH DISTT PATHANKOT 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-Finance Higher side quoted amount | |
| 4 | L4₹7.2 L+₹1.7 L (30.9%)Rejected-Finance 6 GURU GOBIND SINGH NAGAR DHAKOLI DHAKOLI PATIALA PUNJAB 140602 | PATIALA | PUNJAB | 140602 | L4 | Rejected-Finance Higher side quoted amount. | |
| 5 | L5₹7.5 L+₹2.0 L (35.8%)Rejected-Finance | L5 | Rejected-Finance Higher side quoted amount. |
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
30 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Pathankot
GE West Pathankot
COMPREHENSIVE REPAIR MAINT TO INCL MAINT OF JOINERY AND MISC IN MD ACCN IN ZONE A AND B IN AOR OF AGE B/R-I UNDER GE(WEST)PATHANKOT
2024_MES_669906_1
GE/PKT-34/2024-2025
Open Tender
Miscellaneous Works
Item Rate
180 days
GE West Pathankot
COMPREHENSIVE REPAIR MAINT TO INCL MAINT OF JOINERY AND MISC IN MD ACCN IN ZONE A AND B IN AOR OF AGE B/R-I UNDER GE(WEST)PATHANKOT
8 documents required · 8 mandatory
₹500
GE West Pathankot
₹20,000
5 Nov 2024
2 Sept 2024
6 Oct 2024
2 Sept 2024
30 Sept 2024
16 Sept 2024
Amount
Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 10mm thick in CM 1:6 on other than fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for 5 mm thick rendering on brick work or concrete surfaces in CM 1:3 as in ceiling of roof slab ,fin, facia, culvert, chajjas, parapet and similar article etc finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying minimum 02mm thick white cement based wall care putty on wall surfaces & making smooth surface and applying two coat of distemper oil emulsion over and including one coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for 16-18mm thick Marble work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed.
Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipe including all fittings ,heads shoes, bends etc including removal to store ,Internal dia of pipe in 75MM/110mm complete all as specified and directed.all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed.
S&F PVC (SWR) bends any radius 110mm dia all as specified and directed.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description n.exc 1 sqm and removing from site complete all as specified .
S&F factory made Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
M&L for 18mm thick WPC(wood particle composit) sheet one side prelam sheet and other side wood nature colour for kitchen cabinet, cupboard, partition & almirahs etc fixed with screws to steel/timber/PVC frame work etc of density 600 KG/Cum incl 100% termite/water proof, fire rertradent, eco friendly, and finish at all edges at level for marking edges lipping using binding tape etc complete all as specified and directed.
M&L for 18/19mm thick Pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick teak wood lipping fixed with screws to steel/timber frame work as in shutters & shelf of Kitchen cabinet, cupboard, partition & almirahs etc including taking down old shutters & shelf etc complete all as specified and directed.
S&F 5mm thick PVC sheet one side prelam sheet for kitchen cabinet/cupboard of density 600 kg/Cum complete all as specified and directed.
M&L for 03 mm thick Sheet glass, ordinary quality and glazing with oil putty or fixed with bead/glazing pins in square n exc 0.5 sqm in each pane including hacking out old broken glass from wooden/steel frames complete all as specified.
S&F 100mm long Extruded aluminum alloy handles, cast type, anodised complete all as specified .
S&F stainless steel designer handle (heavy duty) of 100mm size, fixed to kitchen cabinets, complete all as specified .
S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 40 mm complete all as specified .
S&F 100mm long Hasp & staple, safety type, aluminum anodised with hinge pin including bolt to hinge plate with screws complete all as specified.
S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.
S&F in repair stainless steel plain basket of size 17'' x 20'' x 6'' madeout of SS 304 grade Stainless Steel Wire, weight of each basket should not less than 2.5kg complete all as specified and directed by Engg-in-Charge.
S&F in repair stainless steel partition basket of size 17'' x 20'' x 6'' madeout of SS 304 grade Stainless Steel Wire, weight of each basket should not less than 2.65kg complete all as specified and directed by Engg-in-Charge.
S&F in repair stainless steel cutlery basket of size 17'' x 20'' x 6'' madeout of SS 304 grade Stainless Steel Wire, weight of each basket should not less than 2.55 kg complete all as specified and directed by EIC.
S&F in repair stainless steel cup & soucer basket of size 17" x 20" x 4" madeout of SS 304 grade Stainless Steel Wire, weight of each basket should not less than 2.55 kg complete all as specified and directed by EIC.
S&F in repair stainless steel plate basket of size 17'' x 20'' x 6'' madeout of SS 304 grade Stainless Steel Wire, weight of each basket should not less than 2.75 kg complete all as specified and directed by EIC.
S&F in repair SS 20'' long telephonic slider to facilitate drawer slide of steel ball bearing fixed with steel screws complete all as specified and directed by EIC.
S&F in repair 25 mm bore stainless steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type brackets, funnels etc suitable for single curtain rod, etc complete all as specified.
S&F in repair MS helical door spring 150mm size fixed to steel frame as directed by Engineer-in-Charge
Repair to Old steel window not exc 2.00 Sqm each incl replacement of hinges, Handle, and necessary oiling ,welding to shutter and chowkhat for making window in serviceable condition, the quoted rate deemed to be included for replacement of minor parts as mentioned in item discription Complete all as specified
Repair to Table dressing with mirror 5 mm thick of 355x1220 mm complete incl hanging to wall and repair to drawers , replacement of knobs, complete all as specified and directed.
Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.
M&L for 75mm thick plain cement concrete 1:3:6, type C-2 using 40mm graded crushed stone aggregate as in sub base finished surfaces of concrete to be even and rough to receive the topping layer complete all as specified and as directed.
M&L for colourd Machine pressed precast rubber moulded concrete interlocking(red/yellow) paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with 6-8mm white Cement layer mixed with pigment and coated with epoxy coating having high glossy finish including 50mm thick sand cushioning bed complete all as secified and directed.
M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, kneelers, apex stones,bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.
Desilting and cleaning of blocked storm water drain/nallaha and culvert etc by removal of mud, soil, aggregate, debris manually and removal to distance exc 50m but n.exc 100m and depositing in low laying area, etc complete all as specified and directed.
S&F Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; railings; framework of water tanks,coolar stand ,framed and hung as in steel gates including pintle hinges, stops,hand-made sliding bolts etc and similar work conforming to Fe.290.Gde-E-165,ornamental and intricate design complete all as spd and directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including all quions, wall, arches, pillars, man-holes, drain etc complete all as specified and directed.
M&L for burnt clay brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
All as per Srl item No. 40 here-in-before but except brick complete all as specified and directed.
M&L for rendering 15mm thick in two layers(5mm +10mm) in CM 1:4 mixing with WPC on top layer @ 200ml/bag ,on fair faces of brick work concrete surface of wall, finished surface even and smooth without using extra cement complete all as specified and directed. Note:-WPC shall be measured and paid separtely.
M&L for rendering 12mm thick in CM 1:4 on brick work ,concrete surface of drain, finished surface even and smooth without using extra cement complete all as specified and directed.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 20,328.00 and any other reduction if any from quoted amount.
M/S RUDRA CONSTRUCTION CO (BID ID -3107559)
DABGOTRA BUILDERS (BID ID -3107584)
JP AND CO. (BID ID -3106957)
M/S OM SAI RAM BUILDERS (BID ID -3100944)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .