SPECIAL REPAIR TO TOILET AND BATHROOM OF BLDG NO P-52 AND OTHER SANCTIONED WORK UNDER AGE BR III AT CHANDIMANDIR

Amount

Taking down chowkhats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down chowkhats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.

Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified & directed by Engineer-in-charge.

Material and labour for brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Material and labour for brick work with sub class ‘B’ bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Dismantling water tanks of capacity exceeding 500 litres n exc 1000 litres and removing to store complete, all as specified and directed.

Demolition of cement concrete unreinforced in ground floor or any floor level, terrazo flooring, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed

Supply and fixing solid PVC frame having profile 105mm x 60mm , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density 750, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Supply and fixing 35mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides , BWP, including applying french polish to match sunmica lamination, all as specified & directed by Engineer-in-charge.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.

Material and labour for 10mm thick rendering plaster in Cement and Sand mortar 1:3 over brick work or concrete surfaces , finished fair and even without using extra cement, as in ceiling, chajjas, facias complete all as specified & directed.

Material and labour for 15mm thick rendering cement plaster in Cement and Sand mortar 1:6 over brick or concrete surfaces of wall , finished even and fair complete all as specified and directed

Supply and fixing for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste, fixed in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required all as specified and directed.

Material and labour for dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in Cement and Sand mortar 1:4 complete all as specified and directed

Supply only Integral waterproofing compound,ISI marked, all as specified. Make Pidiproof LW ( Dr Fixit) or equivalent as approved by GE.

Material and labour for three coats of white wash on plastered or unplastered ceiling surfaces including preparation of new surfaces complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, superior quality as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.

Material and labour for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick backing coat in CM (1:4) all as specified and directed by Engineer-in-charge.

Water proofing treatment to SUNKEN PORTION and adjoining walls of kitech. WC, Bath & Toilet etc. : 15 mm plaster in cement mortar (1:3) after roughning and cleaning the surface mixed with WP compound as per manufacturer's instructions shall be provided on sunken portion while the concrete is green :- (a) Apply cement slurry to the surface @ 0.488 kg / Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sq. m and the surface will be allowed to air cure for 4 hours. (b) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (c) Curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Paste one layer of 3mm thick APP membranne with bitumen by torch application to the treated sunken surface. (e) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound of make mentioned as specified in Appx 'B'. (f) Testing of all traps & Joints shall be done after sealing & before filling of sunken slab

Material and labour for plain cement concrete 1:7:12 type F-2 using 40mm graded brick aggregate as in sunken floor filling and mass concrete, including demolition of old lime concrete and complete removal as requried, complete all as specified & directed.

Supply and fixing solid PVC frame (Single Rebated) of size 75mm x 50mm made out of solid PVC foam with homogenous fine cellular structure density 550 having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design ,solid PVC foam with homogenous fine cellular structure density 750 having smooth outer integral skin, supplying & fixing in frame at site complete all as specified and directed.

Supply and fixing steel windows , ventilator fixed type with glazing bars, including one shop coat of red oxide zinc chrome primer complete all as specified & directed.

Material and labour for preparation of new steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified & directed by Engineer-in-charge.

Supply and fixing for aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, all as specified & directed by Engineer-in-charge.

Supply and fixing 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Material and labour for 25mm thick cement concrete type B-0, 1:2:4 (using 12.50mm graded crushed stone aggregate) as in sub base finishing even and fair to receive to top layer complete all as specified & directed.

Supply and fixing 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed by Engineer-in-charge.

Supply and fixing for aluminium, anodized barrel tower bolts (ISI Marked) of extruded section and fixed, 200mm long, dia of bolt not less than 10 mm,complete all as specified.

Supply and fixing for 150mm size aluminium handle (ISI Marked), cast type, anodised complete all as specified & directed by Engineer-in-charge.

Material and labour for cast iron nahani trap 100mm dia with grating including jointing to waste pipe with run led jointed and seting in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Supply and fixing for vitreous china wash basin white, flat back of size 550 x 400 mm white including waste fittings, brass chromium plated coupling, brackets including cutting for and pinning in ends of brackets errect stand and supply and fixing waste pipe, PVC connections 15mm size with PTMT nuts of length 450mm and Pillar tap, cast copper alloy, with capstan heads, chromium plated for 15mm bore pipe complete all as specified & directed by Engineer-in-charge.

Material and labour for Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with Cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of PCC (1:2:4), type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc , all as specified. Make: Cat Part No. 2071 of 'Cera' or equivalent makes mentioned in Appx 'C'

Material and labour for vitreous China wash down water closet (pedestal pattern), coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and CP jet including PVC connection, fixed complete including demolition of old unservicable WC and provision of PCC 1:2:4, type B-I all as specified. Make: Cat Part No. 2008 for EWC, 2308 for seat cover, 2201/B for internal fittings of 'Cera' or equivalent in makes mentioned in Appx 'C'

Supply and fixing for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.

Supply and fixing PVC valve less syphonic action type flushing cistern low level, dual flush, white with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor, fixed as in repair complete all as specified & directed.

Supply and fixing 1000ltrs capacity rotational moulded polythene water storage tanks ,white coloured, double layered (Cylinderically vertical with closed top) hoisted and fixed in postion including fixing arrangement for inlet, outlet, over flow and vent pipe of standard size complete including 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms) fixed as in repair complete all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Supply and fixing for tubular towel rail Brass CP, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws complete all as specified & directed by Engineer-in-charge.

Supply and fixing grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed by Engineer-in-charge.

Supply and fixing for soap dish, vitreous China white, embedded in the wall, approximate size 160x 160x90mm all as specified & directed by Engineer-in-charge.

Supply and fixing for 15mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 and taking down existing tubing complete all as specified and directed.

Supply and fixing for 20mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 and taking down existing tubing complete all as specified and directed.

Supply and fixing for mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, Bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

Supply and fixing for mild steel galvanised iron water tubing 20mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, Bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

Supply and fixing stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 20mm bore iron pipe or for union complete all as specified & directed by Engineer-in-charge.

Supply and fixing chromium plated, fancy type shower rose with swivel joints 125mm dia with shower arm brass CP 195mm long with bend of 45 degree and fixing to steel pipe 15mm bore and fixed complete all as specified and directed.

Supply and fixing for Stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) , screwed down ,high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified.

Supply and fixing bib taps, 15mm bore, long body, fancy type with wall flange, chromium plated, ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair, all as specified and directed.

Supply and fixing in repair, angular stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified & directed by Engineer-in-charge.

Supply and fixing uPVC soil waste pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed

Supply and fixing 110mm bore PVC (SWR) bends any radius, complete all as specified and directed

Supply and fixing in repairs vitreous China Urinal, Half stall type, white (including PTMT spreader, flush pipe and waste pipe) , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. Complete all as directed by Engineer-in-charge.

Supply and fixing rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc confirming to Fe 410W (Gde -E-250 quality B), all as specified & directed by Engineer-in-charge.

Material and labour for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Supply and fixing for stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in-charge.

Taking down shutters of any description exceeding 1.00Sqm but not exceeding 2.00Sqm each and removing to store complete all as specified & directed by Engineer-in-charge.

Hacking out old broken glass ( any thickness) size quality etc from steel or wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.

Supply and fixing for 3mm thick, sheet glass ordinary quality and glazing with oil putty or beading in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge.

Supply and fixing for 35mm thick second class hard wood factory made plain, framed, panelled shutters (Three panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated all as specified & directed by Engineer-in-charge.

Supply and fixing glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.

Supply and fixing for 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

Supply and fixing Mild steel sliding door bolts (ISI Marked), 250mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, all as specified & directed by Engineer-in-charge.

Surface excavation to required camber and gradient not exceeding 30 cms deep and averaging 15cms deep and getting out in any type of soil, complete all as specified.

Material and labour hard core of broken brick of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed.

Material and labour for plain cement concrete 1:4:8, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.

Material and labour for three coats of white wash on plastered or unplastered wall surfaces including preparation of new surfaces complete all as specified and directed

Supply and fixing 80mm thick factory made machine coloured pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006 of, M-40 grade, joints filled with sand complete all as specified and directed.

Material and labour for sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

Removal excavated soil to a distance exceeding 250m and upto distance of 500m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate cast in situ in copings on parapet on roof top including weathering, slightly rounded or chamfered angles and throating and finishing the surface even and smooth without using extra cement and including demolition of old concrete and removal of debris upto a distance of 1.50KM and providing necessary form work and scaffolding as per site requirement and carriage of all material all as specified and directed by Engineer-in-charge. - (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.

Material and labour for preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.

Supply and fixing for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as directed by Engineer-in-charge.

Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Supply and fixing 12mm thick pre painted perforated particle boards or tiles for insulation and accoustic purposes, 600mm x 600mm in size, fixed on GI snap grid in ceiling, flat or sloping complete all as specified and directed.

Material and labour for GI snap grid frame work for false ceiling of size Size of grid 605 x 605mm complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.

Removal excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

Surface dressing n exc 15 cm deep in soft and loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by Engineer-in-Charge.

Material and labour for machine coloured pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade, set and jointed in neat cement slurry and pointed in grey cement over 40mm thick sand cushion complete all as specified and directed

Material and labour for plain cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed by Engineer-in-charge. - (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.

Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified & directed by Engineer-in-charge.

Supply and fixing sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 2.5 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 2.5 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and including PVC concealed conduit 20mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good, after taking out old unserviceable sub main wiring complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 2.5 sqmm and one single core of 2.5 sqmm cable along with PVC conduit shall be considered as 1 running metre.

Supply and fixing sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 4 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 4 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and including PVC concealed conduit 20mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good, after taking out old unserviceable sub main wiring complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 4 sqmm and one single core of 4 sqmm cable along with PVC conduit shall be considered as 1 running metre.

Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and remving from site, all as specified and directed by Engr-in charge.

Supply & Fixing for MCB ,SPN , 240 volt, 40Amps 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. Make :-Havells Cat NoDHMGCSNF040 or equivalent makes mentioned in Appx 'C'.

Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly including new cast iron sunken boxes duly painted with two coat of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side covered with 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator in and including rigid non metallic PVC heavy duty CONCEALED CONDUIT complete as directed Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly including new cast iron sunken boxes duly painted with two coat of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side covered with 3mm thick plastic laminated sheet, comprising of One socket outlet three pin ,6 Amp on the same board , all as directed complete as directed Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly including new cast iron sunken boxes duly painted with two coat of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side covered with 3mm thick plastic laminated sheet, comprising of One socked outlet three pin, 5/6 Amp , independent board, in and including rigid non metallic PVC heavy duty concealed conduit all as specified, all as directed complete as directed Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 2.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 2.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly including new cast iron sunken boxes duly painted with two coat of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side covered with 3mm thick plastic laminated sheet, comprising of One socket outlet three pin ,6/16 Amp, independent board,in and including rigid non metallic PVC heavy duty concealed conduit all as specified, all as directed complete as directed Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

Supply & Fixing for switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for switch piano, flush type, 15 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for sockets outlet multipurpose 5 pin, 5 Amps flush type all as specified and directed by Engineer-in-charge

Supply & Fixing for sockets outlet multipurpose 2 in 1 pin, 5 and 15 Amps flush type ISI marked all as specified and directed by Engineer-in-charge

Supply & Fixing for ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

Supply & Fixing for LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate / Glass Tube 20 watts capacity 4 feet long and white light and including connections from ceiling rose complete , all as specified and directed. Make C&S Cat No LTDC01220WLED/WD or equivalent makes mentioned in Appx 'C'.

Supply and fixing for 9W LED BULB B22 WHITE all as specified and directed. (Make :- C&S Cat part No:-LTHPLEDLAMP9WB22 white or equivalent makes mentioned in Appx 'C')

Supply and fixing for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

Supply & Fixing for sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way double door with 200 Amps rated copper bus bar and blank plate as required complete all as directed by Engineer-in-charge.(Make :- Havells Cat Part No. DHDNSHODAW08 or equivalent makes mentioned in Appx 'C').

Supply & Fixing for MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. Make :-Havells Cat No DHMGCSPF006-032. or equivalent makes mentioned in Appx 'C'.

Supply and fixing exhaust fan 300mm sweep, 240 volt, 50 Hz, with louvers heavy duty metal body, 900 RPM, single phase including making connection with suitable size twin core cable complete all as specified and directed. MAKE : Havell's / BAJAJ/ Crommpton / Khaitan

Cutting openings, through brick walls in round shape , for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish not exc. 50m complete all as specified & directed by Engineer-in-charge.

Supply & installing, testing and commissioning of hi wall mounted invertor type hot and cold split AC indoor & outdoor units with inbuilt air Ioniser and plasma filter for better air quality, electric driven, single phase, AC 230 volts, 50Hz, input power 1950 watts, cooling cap 17500 BTU/hr of capacity 1.5TR (4500 Kcal/Hr) (5 star rating) with wireless remote control including fixing in position with and including necessary copper pipes, making of hole in wall, electric wires, condensed drain water pipes as reqd at site, angle iron frame for indoor & outdoor unit etc and making good surface finishes of walls (internal and external surfaces) & floors where installed to match with the existing complete all as specified and as directed. Make : Hitachi/Daikin /O.General /Carrier

Supply and installed voltage stabilizer automatic operation with copper wound coil, digital display type, single phase naturally air cooled indoor type & designed for input variation between 170V to 250 Volt with output voltage stabilized at 230 Volt + 2.5% of caacity 4 KVA complete all as specified and directed. Make : AE /VINITEC/MICROTECH/BRENFORT

Supply and fixing sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with 2 pin and earth plug and socket complete with one single pole MCB 240 volts, 32 Amps, 10 KA, 'C' Curve complete all as directed by Engineer-in-charge. (Make :-Havells Cat No. DHDPUSN020 for encloser and DHMCCSPF006-032 or equivalent makes mentioned in Appx 'C' as approved by GE).

Supply & Fixing for stepped type electronic fan regulator flush type complete all as specfied and directed by Engineer-in-charge.

Supply and fixing ceiling fan 1400mm sweep, 240 Volts , optimum performance double ball bearing fixing and connecting up with regulator and fixing with ceiling, complete all as specified and directed. Make : USHA/BAJAJ/ HAVELLS/KHAITAN/CROMPTON

Supply and fixng LED recesed mounted 36 watt full open 2 ' x 2' glare free each and uniform illumination including taking down existing unservicable LED complete all as specified and directed : Make : Crompton Model No LCTLRN-36-FO-CDL or equivalent in C&S / Havells /Bajaj

Supply and installation of desert cooler with outer body made out of PGI (Plain Gaivanised iron) sheet not less than 1.20mm thickness for fixed part, thickness of PGI sheet for shutter not less than 0.80mm thick, front grill made of PGI sheet with minimum weight 2.80Kgs, overall outer size not less than 66cm x 66cm x 99cm (height), electric driven copper wounded fan motor and submersible pump for required flow of water (single phase) having nominal airflow capacity 4000 cum per hour including provn of stand frame made out of 40x40x5mm thick MS angle iron of size required at site along with welding and two coat of synthetic enamel black paint over a coat of red oxide complete all as specified and as directed. Make of motor and submersible pump : Khaitan /Bajaj /Crompton

Vasudeva Trading Co.

Premier Constructions

m/s krishna engineers1

M/s Om parkash

M.P. Builders

Supreme Constructions

AMRIT SINGH