REPAIR/REPLACEMENT OF INTERNAL WIRING,ELECTRICAL FITTING AND FIXTURES INCL DAILY MAINT OF ELECTRICAL COMPLAINTS OF OTM AND MD ACCN AREA AT AF STN JAMMU AND KALUCHAK AREA UNDER GE (AF) JAMMU

Amount

Attending complaints for checking of existing electrical points wiring upto size 6 sqmm in any Buildings for continuity ,no light including carrying out minor repairs etc as required to make the item functional and replacing burnt wire ends, small pieces of wire, tightning of loose connections etc all as specified.Note- Contractor has to deploy Qualified Electrician and Helper with all necessary tools on all working days to the complaint cell and complaints will be attended on the same day itself. Recovery for non attending complaints will be three times rate quoted by the Contractor. Note : a) Contractor shall provide his tadesmen/labour along with necesary tools to rectify defects from 0830 to 1700 Hrs on all working days. (b) One complaint slip shall be considered as Each Job c) The contractor shall depute ITI holder electrician & skiilled helper to attend complaits, with proper uniform as finalised by Engr-in-Charge, with name tag.

Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately.

M&L for point wiring for light/fan/Bell with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc

All as per item No.3 above but for one multipin 5 amps socket outlet on same board.

All as per item No.3 above but for one multipin 5 amps socket outlet on independent board

All as per item No . 3 above but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.

S & F switch piano button flush type, single pole one way 5 amps complete all as specified and directed.

S & F switch bell push piano flush button single pole one way 5 amps complete all as specified and directed.

S & F piano switch two way flush button 5 amps complete all as specified and directed.

S & F 5 pin socket outlet 2 in 1, 3 pin, 5 amps flush type complete all as specified and directed.

S & F 5 pin switch socket combination 2 in 1, 5 amps flush type complete all as specified and directed.

S & F switch socket combination 5 in 1, 5 and 15 Amp flush type controlled by one switchcomplete all as specified and directed.

S & F ceiling rose, 3 phase on PVC square blocks surface bakelite 65 x 50 mm, 3 terminal complete all as specified and directed.

S & F Lamp holder, PVC/Polycarbonate type with back plate for batten fittings complete complete all as specified and directed.

S & F flush type fan regulator 230V, electronic rotary stepped increase complete all as specified and directed.

S & F Call bell ding dong AC, 23 Volts, single pole type complete all as specified and directed.

S & F Switch Modular (piano) flush button single pole one way 6 amps 1 module with suitable plate and cover complete all as specified and directed.

S & F Switch Modular (piano) flush button single pole one way 16 amps 1 module with suitable plate and cover complete all as specified and directed.

S & F Socket outlet flush modular (piano) type 5 pin 6 Amps 1 module with suitable plate and cover complete all as specified and directed.

S & F Socket outlet flush universal modular (piano) type 6 pin 6/16 Amps with suitable plate and cover complete all as specified and directed.

S & F Electronic Modular Fan regulator step type not less than 100/120 watt with suitable plate and cover complete all as specified and directed.

Supply and fixing three modular sheet fitting complete all as specified and directed.

Supply and fixing four modular sheet fitting complete all as specified and directed.

Supply and fixing Six modular sheet fitting complete all as specified and directed.

Supply and fixing twelve modular sheet fitting complete all as specified and directed.

Supply and fixing modular 6 Amps socketcomplete all as specified and directed.

Supply and fixing modular 16 Amps socket complete all as specified and directed.

Supply and fixing modular 16 Amps swicth complete all as specified and directed.

Supply and fix fan fastner 8 mm complete all as specified and directed.

Supply and fixing copper wire 1.5 Sqmm green colour single corecomplete all as specified and directed.

Supply and fixing copper wire 2.5 Sqmm green colour single core complete all as specified and directed.

Supply and fixing PVC exhaust fan 200 mm sweep complete acessories with suitable copper wire including taking down old unserviceable / burnt exhaust fan .

M&L for sub main wiring with two run of 6 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLS cable in and including electrical grade PVC conduits of desired colour not less than1.2 mm thick and 25 mm wide & 6 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

Description all as per item No.33 above but size 4 Sqmm two runs and with 4 sqmm FRLS copper wire for earth continuity.

Description all as per item No.33 above but size 2.5 Sqmm two runs and with 2.5 Sqmm FRLS copper wire for earth continuity.

Supply and fixing LED tube light fitting 18/20 watt wall mounted LED batten with aluminum housing & integrated electronic driver as per CAT PART No LDL-20-CDL of Crompton or equivalent of Philips/Wipro incl taking down old UNSV complete all as specified and as directed

Supply and fixing LED tube light fitting 9/10 watt wall mounted LED batten With aluminum housing & integrated electronic driver as per CAT PART No LDL-10-CDL of Crompton or equivalent of Philips/Wipro incl taking down old UNSV complete all as specified and as directed

S & F by Flushing to walls MCB distribution board Double door SPN 230 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors/walls etc incl taking down the old DBs incl taking down old unserviceable

S & F by Flushing to walls MCB distribution board Double door SPN 230 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down the old DBs incl taking down old unserviceable .

S & F by Flushing to walls MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls incl taking down the old DBs etc.

S & F by Flushing to walls MCB distribution board double door 240 volts 2 way making good to disturbed surfaces of floors walls incl taking down the old DBs etc.

Distribution board iron clad TPN DB, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Note: MCB's and MCCB will be measured and paid separately under relevant items)

S&F MCB SP 6 to 32 Amps, 240 Volts complete incl taking down old unserviceable .

S&F MCB SPN upto 32 Amps ,240 Volts complete incl taking down old unserviceable

Supply and fixing 9 watt LED wall light/ceiling light ,body colour white and black voltage AC85-240 50 Hz Model No -LX135WL/9W

S&F MCCB TPN 100 Amps ,415 Volts complete incl taking down old unserviceable

S&F MCCB TPN 125 Amps ,415 Volts complete incl taking down old unserviceable one.

S & F in replacement MCB SPN 63 Amps, 230 V,AC incl taking down old unserviceable

S & F in replacement TPN 63 Amps 415 V incl taking down old unserviceable

M & L in replacement of condenser 2.5 mfd, 250 V incl taking down old unserviceable one. and connecting complete

All as per Srl No 50 above, but 4 mfd incl taking down old unserviceable one.

All as per Srl No 50 above, but 3.5 mfd incl taking down old unserviceable one.

M & L for industrial type metal socket enclosure with 240 volt MCB 20 Amps, with metal plug top complete all as specified incl taking down old unserviceable one.

Supply and fixing of 10 Watt energy efficient wall mouted LED Bulk head luminaire made off die cast aluminium with opal diffuser IP 65 Cat part No- LBHE-10-CDL of Crompton equivalent of Philips/Wipro incl taking down old UNSV complete all as specified and as directed

Hanging only ceiling fans in repairs any size, any make, and necessary connection as directed by Engineer-In-Charge.

Supply and fixing 20 Watt LED post top lantern with die cast aluminium spigot , spun aluminium power coated top cover Aluminium PDC heat sink , opal PC diffuser and clear acryylic IP65 Cat LPTH-20-CDL equivalent of Philips/Wipro incl taking down old UNSV.

Supply and fixing 36 watts recess /pendant mounting ultraslim LED flat panel 2' X 2' made of extruded aluminium frame with high LEDs & glare free opal diffuser IP20. LCTLRNE-36-FO-CDL of Crompton equivalent of Philips/Wipro incl taking down old UNSV.

Supply and fixing round sheet for blank area 2.5 " dia and 3 "

Supply and fixing of MAPLE IP 65 LED post top with moonlight effect and efficient light distribution Cat Part No -LPTO-40-CDL incl taking down old UNSV.

Supply and fixing LED flame proof batten suitable for single and twin T8 tube of 16/20 Watt. Make -Cropton Cat Part No EXTN1LT8-16/20/Havells/Sudhir

Supply and fixing Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and as directed

Supply and fix Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250 V, 2p+earth complete all as directed

Supply and fix Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 25A, 250 V, 2p+earth complete all as directed

Supply and fix flame proof distribution box SPN 8 way in cast aluminium alloy LM -6 contruction with following incoming bus bar weather proof in cast aluminium LM-6 enclosure, opened by externally spring type knobs, complete with M-25 cable entry to suit incoming cable and 6 Nos M-20 cable entries for out going cables from bottom, suitable for fixing on wall etc duly epoxy powder coated with flame proof flexible metallic conduit upto 01 mtr length including 01 No SPN MCB 32 Amps and 06 Nos MCB SP upto 16 Amps as outgoing duly tested and certifed by CMRI Dhanbad.

Supply and fix flame proof Regulator for Ceiling fan SP 230V, completes including all connected accessories all as directed and specified.

S & F in replacement MCCB Three pole 415V 125 Amps 16 kA incl taking down old unserviceable one.

S & F in replacement MCCB Three pole 415V 200 Amps 25 kA incl taking down old unserviceable one.

S & F in replacement MCCB Three pole 415V 250 Amps 25 kA incl taking down old unserviceable one.

M & L in replacement of PVC Boards closed recessed of size 4x4x2 inches complete all as specified and as directed

M & L in replacement of PVC Boards closed recessed of size 4x7x2 inches complete all as specified and as directed

M & L in replacement of PVC Boards closed recessed of size 8x10x2 inches complete all as specified and as directed

M & L in replacement of PVC Boards closed recessed of size 10x12x2 inches complete all as specified and as directed

Supply and fix Hylam sheet 4X4 inches complete all as specified and as directed

Supply and fix Hylam sheet 4X7 inches complete all as specified and as directed

Supply and fix Hylam sheet 8X10nches complete all as specified and as directed

Supply and fix Hylam sheet 4X4 inches complete all as specified and as directed

Supply and fix flexible pipe white colour dia 3/4"complete all as specified and as directed

Supply and fixing PVC Gang box two way or one way for shifting of 5A/15 Amps switch & socket etc complete all as specified and as directed

M & L for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead galvanised iron 4mm dia wire by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.

Taking out unserviceable service wire and supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor seved with inner sheathing of PVC sheathed in service connections twin core cable flat of size 4 Sqmm all as specified and directed by Engr in charge

Taking out unserviceable service wire and supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor seved with inner sheathing of PVC sheathed in service connections twin core cable flat of size 10Sqmm all as specified and directed by Engr in charge .

Taking out unserviceable service wire and supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor seved with inner sheathing of PVC sheathed in service connections twin core cable flat of size16 Sqmm all as specified and directed by Engr in charge

Supply and fixing 7 watts LED Bulb complete all as specified and as directed

Supply and fixing wall mounted decorative light 15 watts vega round complete all as specified and as directed

Supply and fixing 18 way modular box complete all as specified and as directed

Supply and fixing 14 way modular box complete all as specified and as directed

Supply and fixing 12 way modular box complete all as specified and as directed

Supply and fixing 6 way modular box complete all as specified and as directed

Supply and fixing 4 way modular box complete all as specified and as directed

Supply and fixing 3 way modular box complete all as specified and as directed

Taking down carefully UNSV exhaust fan any size and any company including accesseries and ceiling fan any size any make complete materials to store for keeping in safe custody in store keeper at E/M store yard.

M & L for rewinding of ceiling fans 1200/1400mm sweep of any make/model, including removal of existing burnt windings carefully from the slots,cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enmelled copper winding wire of same gauge/same number of turns as that of existing and connecting the coils suitable to operate on 230 volts single-phase AC supply permanent capacitor type, tying the windings and applying air dry insulating varnish and drying the windings including replacing the defective components such as bearing, gun metal bush,rubber bush/bolt, capacitor,flexible cord, shaft and painting including assembling after lubricating movable components complete including testing complete all as specified and directed for :- Note :-(1) Fan will be issued from AGE E/M store yard through gate pass.(2) Bearing/ Gunmetal bush/ rubber bush bolt/ capacitor / cord flexiable / stator/rotor and painting only will be measured and paid separately under respective item.

M & L for rewinding of Exhaust fans 200 to 325mm sweep of any make/model, including removal of existing burnt windings carefully from the slots,cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enmelled copper winding wire of same gauge/same number of turns as that of existing and connecting the coils suitable to operate on 230 volts single-phase AC supply permanent capacitor type, tying the windings and applying air dry insulating varnish and drying the windings including replacing the defective components such as bearing, gun metal bush,rubber bush/bolt, capacitor,flexible cord, shaft and painting including assembling after lubricating movable components complete including testing complete all as specified and directed for :- Note :-(1) Exhaust Fan will be issued from AGE E/M store yard through gate pass.(2) Bearing/ Gunmetal bush/ rubber bush bolt/ capacitor / cord flexiable / stator/rotor and painting only will be measured and paid separately under respective item.

Supply and replacement of PVC canopies of suitable size for ceiling fan of any make/model(set of two) with screws.

Supply and fix U clamps with rubber reel and nuts/bolts of suitable size with pins.

Supply and replacement of down rods upto 30 cm long heavy duty of any size with gudgeon pins complete.

Supply and replacement of fan blade assy suitable for 1200mm sweep ceiling fan (set of three) of any model/make complete.

Supply and replacement of fan blade assy suitable for 1400mm sweep ceiling fan (set of three) of any model/make complete.

Supply and replacement of fan blade assy suitable for 300mm sweep exhaust fan (set of three) of any model/make complete.

Supply and fixing of 3, 2X 3 way modular pop up box push and slide locking system including switches and socket 15 amps two nos to avoid accidental opening by feet to be equipped with Arteor outlet complete suitable for raised floor, flush floor & false ceiling and wall etc

Excavation in trenches not exc 1.5 m wide and not exceeding 1.5 m depth for foundation laying of cables etc and getting out in soft loose soil all as specified and directed.

Returning filling including spreading leveling watering and well ramming in layers n.exc 25 cm in soil completed all as specified and directed

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point as in soil complete all as specified and directed

Supply and laying or clumping of DWC (Double Wall Corrugrated) HDPE pipe ISI marked IS 16205 Part II of outer dia of 63 mm and inner dia 50 mm with smooth internal and profiled external surface for non pressure under ground cable including al connected accessories like coupler 'O" ring etc for protection of cable complete all as specified and as directed .

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and as directed .

dito as per item No 105 but size of cable 35 Sqmm 3.5 Core.

dito as per item No 105 but size of cable 25 Sqmm 4 Core .

dito as per item No 105 but size of cable 16 Sqmm 4 Core.

dito as per item No 105 but size of cable 16 Sqmm 2 Core.

Supply and fixing 12 watts LED Bulb .

Supply and fixing 20 watts LED Bulb.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

M/s Shakti Electric Works

M/S GRD ENGINEERS

Mahajan Construction Co

M/s Raj Construction

M/S VIDYA ENTERPRISES