Provn of Hot Water Supply connection to WHB in certain married accommodations at VSB and VSV (Phase-I) at 7 BRD under GE (AF) Tughlakabad

Amount

S & F of Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed to walls/ceilings or laid in floors etc., complete including taking up (or) down the existing GI pipe completely all as specified for following bore of pipes.

Size of pipe 20mm dia bore

Size of pipe 25mm dia bore

Dismantling floor hearth or wall tiles including cement mortar (but not backing) removing serviceable tiles to store and rubbish off the premises

M&L for Screed bed or bedding layer of mortar 15mm thick, CM (1:6) for laying floor finishes

M&L for 10 mm thick cement plaster as backing coat in CM (1:4) as in skirting/dados all as specified

M&L for Non skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colou for Non Skid, coloured ceramic tiles (300x300x7mm thick, in floors etc. set and jointed in neat cement slurry all as specified

M&L for Glazed ceramic coloured tiles 10 mm thick (squre /rectangular) polished area of each tilesexceeding 0.06 sqm but not exceeding 0.11 sqm (450x350x7mm thick in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Taking down plaster in cement mortar on walls and ceiling of any description.

M&L for 10 mm thick rendering on brick wall surfaces in cement mortar (1:6) finished even and smooth without using extra cement

Removing existing treatment of any description completely, preparing the surface and applying three coat of white wash on Wall surfaces complete all as specified

Taking down of chowkhat with shutters of any description exc 1 sqm and n. exc 2 sqm completed all as directed.

Taking down of shutters and refixing in the same opening of any description exc 1.50 sqm completed all as directed.

M&L for anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified & directed by Engr-in-charge.

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.)

S & F of frosted sheet glass 4 mm thick , ordinary quality and glazing exc 0.5sq. m in each complete all as specified.

Cutting holes into or through brick walls buil in cement mortar or cement limeand making good in cement mortar 1:3 n exc half brick thick but not exe one brick thick for inserting hold fast etc

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet, reinforced with MS square tube and edges will be painted to match with printed sheet all as per specification & drawing

S&F of factory made solid PVC moulded door shutter, with particle board core , 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face as per specification .

S&F of Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

Material and labour for applying two coats of synthetic enamel paint including preparation of new steel surfaces any description exc 10cm width or girth completed all as specified & directed.

Material and labour for applying one coats of synthetic enamel paint including preparation of old steel surfaces any description exc 10cm width or girth.

S&F in repair of stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples.

S&F of aluminium anodised 150 mm long tower bolt completed all as specified and directed

S&F of aluminium anodised 125 mm butt hinges completed all as specified and directed

S&F in repairs of vitreous China wash hand basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand including brackets complete as in repairs all as specified and directed.

S&F in repairs of 15mm dia Bip taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs all as specified and directed..

S&F of CP single liver Sink mixer for mixing hot & cold water screwed down for iron pipe all as specified and as directed by Enginerr-in-charge. (Make: Prayag Cat No 8255)

S&F in repair of vitreous china squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rests fixed in repairs incl. provn of concrete bedding

S&F in repairs of 10 Litres capacity PVC valveless , syphonic action type , flushing cistern, low level, white , with inlet, ball valve , float and handle including brackets

S&F of PVC connection 15 mm size with PTMT nuts, 600 mm long

S&F of 15mm dia Stop valves fancy, chromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified.

S&F of 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/cm2 including making thread for fixing with waste coupling complete all as directed.

S&F of waste coupling of 32mm size PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

S&F of 75mm bore PVC(SWR) pipes single socketed, in any length fixed to walls/laid in floors/trenches all as specified and directed

Supply and Fix in repairs of PVC (SWR) bend any radius with access door suitable for 75mm dia pipes.

S&F in repairs of PVC SWR branch piece single 'Y' equal or unequal 75mm bore with access door.

ANAND ENTERPRISES

V r traders

M/S S.K.Electricals

M/S DEVRAJ SINGHAL

POOJA ENTERPRISES