SPECIAL REPAIR OF SECURITY WALL AT KANPUR CANTT

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed

Excavation in trenches not exceeding 1.5 m width and exceeding 1.50 m depth and not exceeding 3.00 m depth getting out in soft/loose soil complete all as specified and directed

Returning & filling in with soil obtained from excavation in layers not .exceeding 25 cm thick including watering ramming etc complete all as specified and directed.

Removal of excavated soil to a distance exceeding 50 m and not exceeding 100 m and deposited as directed complete all as specified and directed.

M & L for Cement concret 1:4:8 type D-2 using 40mm graded stone aggregae in foundations, filling and mass-concrete complete all as specified and directed.

M & L for formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or batter complete all as specified and directed

M& L for form work to sides of pillars, posts , struts, piers, columns and stanchions rough finished surfaces of concrete square , rectangular or polygonal complete all as specified and directed.

M&L for Formwork to side and soffits of floor and roof beam, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports, overhang,chajjas etc. also splays between floor and roof beam etc. for flat rough finished surface of concrete complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including crancking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT bars 5 mm dia & over upto & including 10mm dia in stirrups, spaces & binders, cut to length bent to shape required including crancking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC M-25 (Design mix), 20mm graded stone aggregate as in foundation, columns footing, plinth beams etc complete all as specified and directed

M&L for RCC M-25 (Design mix), 20mm graded stone aggregate as in columns, pillars & piers complete all as specified and directed

M&L for RCC M-25 (Design mix), 20mm graded stone aggregate as in beams lintels etc complete all as specified and directed

M&L for RCC M-25 (Design mix), 20mm graded stone aggregate as in slab, pile cap, pitching on side slope etc complete all as specified and directed

Demolition of brick work built in cement mortar complete all as specified and as directed.

M&L for Brick work with fly ash brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surface finished fair and even complete all as specified and directed

M&L rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick/concrete surface finished fair and even complete all as specified and directed

M&L Preparing newly plastered surfaces and apply two coats of cement based paint over a coat of Primer complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed

S&F of MS work as in post and struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc, ) including all necessary drilling, bolting or riveting etc and similar work confirming to Fe 290 Gde E 165 complete all as specified and directed

S & F in repair galvanized 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or typing at crossings with and provision of galvanized mild steel wire staples or steel pins etc complete all as specified and as directed

M& L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in bands copings including necessary form work etc complete all as specified and directed

S&F 1.6 mm thick Mild steel, plain, black sheet in wall cladding , steel gates and similar work, cut to size , holes punched: including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required complete all as specified and directed

M & L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed

S &F for 600mm dia Reinforced concrete pipes class NP-3 , laid and jointed complete with collars complete all as specified and directed

M &L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Taking down cement plaster on brick walls including raking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed

Demolition of cement concrete (un-reinforced) of any description in ground floors and paving not exceeding 15cm thick (below or above the ground level) complete all as specified and directed.

M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6m mean radius built in CM (1:4) but except brick complete all as specified and directed

S&F of 110 mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in floor/wall complete all as specified and directed

M& L for complete removal of existing treatment of old plastered surfaces and apply two coats of cement based paint complete all as specified and directed

M&L for 400mm dia pile Boring for Bored cast-in-situ piles upto 4.50 meters depth in soil and getting out and disposal of spoil to a distance 50 m using DMC method (Direct mud circulation) portion complete all as specified and directed. Note: Piling work will be executed in natural Nallah portion.

M&L for RCC M-30 (Design Mix) work in 400mm dia bored pile upto 4.5 m length from cut off level including form work etc complete all as specified and directed

M&L for mild steel framed work such as grills, gratings etc, with ends of bars shouldered and /or riveted , or forget into spikes: framed guard bars: and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

Note:- (i) Contractor shall make necessary arrangement to stopping flow of water of Nala by creating temporary earthen bund before the location of casting of pile foundation including necessary arrangement for pumping out of excess filled water by pumping and pipe arrangement from up stream to the down stream, if required and removal of bund and making good of Nala after the work is over. Cost of the same shall be deemed to be included in the over all quoted rate of tender. (ii) Pile foundation work to be executed preferably during lean period of rain due to less flow of water in Nallah.

M/s R.V. Constructions

B.K.ASSOCIATES

Mohit Infratech