REPAIR AND PAINTING TO STEEL FURNITURE AT MIL STN SANGRUR AND NABHA UNDER GE(S) PATIALA

Amount

ALMIRAH MEDIUM STEEL WITH SHELVES (DRG NO. FD-1034/FD-1032 ) : Repair/replacement of following parts of almirah medium steel complete all as specified and shown on drawing :- Repair to the almirahs such as removing dents from shutters, back, top, bottom and sides of almirah, repair and refixing of existing legs by welding, repair and refixing of existing shelves and making it serviceable and applying a coat of pink primer where ever required all as directed and specified

Supply and fix in replacement 3 way lock, 4 levers with duplicate keys MAKE : HARRISON/GODREJ and other standard makes as approved by GE all as directed and specified.

Supply and fix in replacement CP MS handle as per existing pattern and design to any type of Almirah all as directed and specified

Repair/replacement of legs by welding to almirah med steel shall be made out of 1 mm thick plane black sheet all as directed and specified.

One coat spray painting to almirah medium steel inner and outer surface with synthetic enamel paint OG/ as per specified colour in drawing. Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as directed and specified.

ALMIRAH LARGE STEEL WITH SHELVES (DRG NO. FD-1031/FD-1031, FD/E6/MAP/18) : Repair/replacement of following parts of almirah large steel complete all as specified and shown on drawing :- Repair to the almirahs such as removing dents from shutters, back, top, bottom and sides of almirah, repair and refixing of existing legs by welding, repair and refixing of existing shelves and making it serviceable and applying a coat of pink primer where ever required all as directed and specified

Supply and fix in replacement 3 way lock, 4 levers with duplicate keys MAKE : HARRISON/GODREJ and other standard makes as approved by GE all as directed and specified.

Supply and fix in replacement CP MS handle as per existing pattern and design to any type of Almirah all as directed and specified

One coat spray painting to almirah medium steel inner and outer surface with synthetic enamel paint OG/ as per specified colour in drawing. Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as directed and specified.

LOCKER BED SIDE STEEL (DRG NO. FD-1029) : Repair/replacement of following parts of locker bed side steel complete all as specified and shown on drawing :- Repair to the lockers such as removing dents from shutters, back, top, bottom and sides of almirah, repair and refixing of existing legs by welding, repair and refixing of existing shelves and making it serviceable and applying a coat of pink primer where ever required all as directed and specified

Supply and fix in replacement chromium plated handle as per existing pattern and design to the lockers steel all as directed and specified

One coat spray painting to locker steel inner and outer surface with synthetic enamel paint olive green Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as per drg.

Supply and fix in replacement chromium plated Hasp & staple all as directed and specified

Supply and fix in replacement steel rod for hanging all as directed and specified

Repair/replacement of legs by welding to locker steel shall be made out of 1 mm thick plane black sheet all as directed and specified.

CHARPOY GI PIPE NYLON NEWAR (DRG NO. FD-220) Repair/replacement of following parts of ''Charpoy GI pipe with nylon newar" complete all as specified and shown on drawing :- Removing of old nylon newar from GI Charpoy, tightening of complete charpoy GI pipe and its parts such as loose check nut, elbow, long rails, short rails and legs etc, Complete all as directed and specified.

Removing of old UNSV GI 3 way elbow 32mm bore med grade from existing charpoy GI pipe and supply and fixing new GI 3 way elbow 32mm bore med grade ISI marked, as approved by GE, all as directed and specified.

Removing of old UNSV check nut from existing charpoy GI pipe and supply and fixing new check nut 32 mm dia, ISI Marked, medium grade as approved by GE, all as specified and directed.

Fixing only after repair by re-threading one side of existing loose long rail/short rail/ leg of charpoy GI pipe 32 mm dia bore complete all as directed and specified by Engr-in -Charge

Removing of old UNSV long rails from GI charpoy and supply and fixing new long rails of length 1950 mm made out of 32mm dia GI pipe med grade ISI marked, Make- TATA/JINDAL/SURYA, including threading on both side, complete all as specified and directed.

Removing of old UNSV short rails from GI charpoy and supply and fixing new short rails of length 900 mm made out of 32mm dia GI pipe med grade ISI marked, Make- TATA/JINDAL/SURYA, including threading on both side, complete all as specified and directed.

Removing of old UNSV legs from existing GI charpoy and supply and fixing new legs of length 440 mm and 32 mm dia GI pipe medium grade (ISI Marked ), Make- TATA/JINDAL/SURYA, including threading on one side. Clamps for FMN set shall be welded to pipe of legs and shall be of sizes as per drg. complete all as directed and specified.

Fixing only after repair short rails to GI charpoy by using old unsv GI pipe long rails obtained from Serial items No 4.05 here in before including threading on both sides complete all as directed and specified.

Fixing only after repairs of legs to charpoy GI pipe made by using old unservicable GI long rail/short rail obtained from item serial items No 4.05 & 4.06 here in before including threading on one sides, complete all as directed and specified. Notes for item No. 4.01 to 4.09:- Unit rates quoted above include for dismantling and reassembling frame of charpoy GI pipe including tightening and providing extra threads and welding the joints as required and directed by Engineer-in-charge.

Supply and fixing 12mm thick plywood top of size 1980mm x 900mm commercial MR grade ISI mark fixed with 08 Nos nut and bolts (flat head) with washer after drilling to charpoy GI pipe complete all as directed and specified. Make: Archid/Anchor/Green ply.

Supply and Fixing of stiffeners with proper welding work mild steel 25 mm square pipe, wall thickness 1.6 mm fixed to long rail parallel including 04 Nos clit made out of MS flat iron of size 50mm x 25mm x 5mm welded with long rail. Each stiffener and welded surface shall be painted with metal primer after welding work, sample all as directed / approved by engr-in-charge.

Supply and fixing each set (two nos is one set) of MS Clamps for FMN set shall be welded to pipe of each legs and size of clamp shall be as per drg. Bottom of lower clamp shall be plugged with 3mm thick MS sheet. Each clamps shall be painted with black paint after welding work, complete all as directed / approved by engr-in-charge.

Supply and fixing with proper welding work mild steel plate of size 40mm x 3 mm thick in the lower ends of legs as per sample approved by GE complete all as directed and

CHAIR VERANDAH (Drg No. FD-256,FD/MAP-II/06) M & L for carrying out repair/replacement of following parts of chair verandah, complete all as specified and shown on drgs after removing the old broken part. Supply & Fix hard rubber toes to legs all as specified and shown on drg.

Welding broken joint of 20mm dia 16 gauge thick conduit pipe of chair verandah.

Preparation of old painted surfaces for painting to chair and apply one coat of white synthetic enamel paint to framed chair verandah map complete all as specified.

Supply & fixing of Seat and Back to chair verandah map shall be of 4 mm thick PVC (Weight not less than 1.85 kg) and with 10 Nos groves to seat and back, all as specified and shown on drg.

Supply & fixing by welding of MS flat of size 32mm x 455mm x 5mm thick to lower portion of seat of chair verandah (FD/MAP-II/06)

RECANNING OF CHAIR VERANDAH (DRG NO. FD-256) : Recanning of verandah chairs with plastic cane (oval shape) 3mm wide and border with 4mm wide cane complete as per Godrej pattern using Make : SHAH/PREMIER brand cane (removing of old broken cane shall be done at BSO yard).

TEAPOY VERANDAH (Drg No. FD-383, FD/E6/MAP/17)) M & L for carrying out repair/replacement of following parts of Teapoy as per drawing after removing the old unservicable parts complete all as specified. Supplying and fixing top of 18 mm thick prelaminated particle board Make (Archid/Novapan/ECO Board) ISI marked exterior grade and 6mm thick Teak edging all around.

S & F Hard rubber/PVC shoes to each legs all as specified and shown on drg.

Preparaing of steel surface of teapoy whereever required by welding and applying one coat of synthatic enamel paint of required colour all as specified and directed.

TABLE OFFICE CLERK STEEL (DRG NO. FD-1004) Repair/replacement of following parts of ''TABLE OFFICE CLERK STEEL" complete all as specified and shown on drawing :- Top using of 18/19mm thick prelaminated particle board Make (Archid/Novapan/Eco) ISI marked exterior grade and 6mm thick Teak edging all around.

S & F Hard rubber/PVC shoes to each legs all as specified and directed.

Repair/replacement of drawer and box of table using 1mm thick plane black sheet and apply pink primer to prepare syrface all as shown on drawing.

S & F 3 way 4 lever lock to table make- HARRISON/ GODREJ and other standard makes as approved by GE.

Preparation of surface of table and apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac) to steel frame, complete all as specified and shown on drg.

TABLE OFFICE OFFICER STEEL (DRG NO. FD-1003) Repair/replacement of following parts of ''TABLE OFFICE OFFICER STEEL" complete all as specified and shown on drawing :- Top using of 18/19mm thick prelaminated particle board Make (Archid/Novapan/Eco) ISI marked exterior grade and 6mm thick Teak edging all around.

S & F Hard rubber/PVC shoes to each legs all as specified and directed.

Repair/replacement of drawer and box of table using 1mm thick plane black sheet and apply pink primer to prepare syrface all as shown on drawing.

S & F 3 way 4 lever lock to table make- HARRISON/ GODREJ and other standard makes as approved by GE.

Preparation of surface of table and apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac) to steel frame, complete all as specified and shown on drg.

CHAIR WRITING (DRG NO. FD/E6/MAP/12) : Repair/replacement of following parts of ''Chair writing" complete all as specified and shown on drawing :- Removing the old unservicable fabric cover and foam from chair and welded the frame wherever required and preperation of entire surface and apply coat of synthetic enamel paint of black colour all as specified & directed.

Supply and fixing seat and back shall be 12 mm thick hot pressed plywood up hoistered with fabric and moulded polyurethane foam ( shall be 50 mm thick and moulded with density 50.55 kg per cubic mtr) with pvc laping all around. The colour of fabric shall be approved by engr-in-charge and complete all as specified and shown on drawing.

Supply and fixing a pair of arms made out of black integral skin polyurethane with 75-85 shore 'A' hard ness and reinforced with MS insert to chair writing all as shown on drg.

Supply and fixing rubber stoper shall be provided as shown on drg.

CHAIR COMPUTER / REVOLVING WITH ARMS (DRG NO. FD/E6/MAP/01) : Repair/replacement of following parts of ''Chair computer / revolving with arms" complete all as specified and shown on drawing :- Removing the old unservicable polyurethane seats and backrest from chair and welded the frame wherever required and repair/replacement of twin wheel castors of swivel type with bracket and apply one coat of synthetic enamel paint of reqd colour after preparation of surface, complete all as specified and shown on drg.

Supply and fixing seat and backrest shall be 12 mm thick hot pressed plywood up hoistered with polyurethane foam ( shall be 50 mm thick and moulded with density 50.55 kg per cubic mtr) covered with fabric cloth, colour shall be approved by engr-in-charge and complete all as specified and shown on drawing.

Supply and fixing a pair of arms made out of black integral skin polyurethane with 75-85 shore 'A' hard ness and reinforced with MS insert to chair writing all as shown on drg.

Repair/replacement of hydraulic system of chair all be provided as shown on drg.

BED HARD STEEL (Drg No. FD/E6/MAP/08) M & L for carrying out repair/replacement of following parts of bed hard steel as per drawing after removing the old unservicable parts complete all as specified. Supply & fix Head board shall be of 18mm thick prelaminated particel board (both side decorative finish shade, standeard PVC edging (mimimum thickned 1.6mm) shall be provided alround in Head boared, all as shown in Drg.

Supply & fix Foot board shall be of 18mm thick prelaminated particel board (both side decorative finish shade, standeard PVC edging (mimimum thickned 1.6mm) shall be provided alround in foot board, all as shown in Drg.

Supply & fix Top of bed shall be of 12mm thick commercial ply wood of Make (Archid/Novapan/National/Green Ply) ISI marked and provided 4mm thick teak wood edging the ply and shall be fixed with steel nut and bolts to steel frame, all as shown in Drg.

Hexagonal Nut and Bolt of size 10mm x 50mm

Supply hard rubber/PVC shoe to the bottom of each leg.

Preparation of surface of hard be and Apply one coat of synthetic enamel paint black to steel frame of bed hard steel, complete all as specified.

TABLE 900mmx600mmx760mm WITHOUT DRAWER (Drg No FD -1007) M & L for carrying out repair/replacement of following parts of Table 900mmx600mm as per drawing after dismantling the old parts complete all as specified :- Top made out of 18mm thick prelaminated particle board exterior grade, Make : Archid/ Novapan /ECCO ISI marked and 4mm thick teak wood beading all around.

Supply hard rubber/PVC shoe to the bottom of each leg.

Preparation of surface of table and apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac) to steel frame , complete all as specified and shown on drg.

TABLE 900mmx600mmx760mm WITH DRAWER (Drg No FD -1008) M & L for carrying out repair/replacement of following parts of Table 900mmx600mm as per drawing after dismantling the old parts complete all as specified :- Top made out of 18mm thick prelaminated particle board exterior grade, Make : Archid/ Novapan /ECCO ISI marked and 4mm thick teak wood beading all around.

Supply hard rubber/PVC shoe to the bottom of each leg.

Preparation of surface of table and apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac) to steel frame , complete all as specified and shown on drg.

TABLE COOK HOUSE / PANTRY STEEL (Drg No FD -1019 & FD - 1020) M & L for carrying out repair/replacement of following parts of Table cook house / pantry steel as per drawing after dismantling the old parts complete all as specified :- S & F Top using 25mm thick polished stone slab kotah/chitor black/ dholpur.

Supply hard rubber/PVC shoe to the bottom of each leg.

Preparation of surface of table and apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac) to steel frame , complete all as specified and shown on drg.

STEEL CHAIR SQUARE PIPE WITH SEAT / BACK CUSIONED (Drg No FD -360) M & L for carrying out repair/replacement of following parts of STEEL CHAIR SQUARE PIPE WITH SEAT / BACK CUSIONED as per drawing after dismantling the old parts complete all as specified :- Removing the old unservicable polyurethane seats and backrest from chair and repair/replacement of seat and back of chair using 12mm thick BWR phenol bonded plywood over with 75mm thick 40 density foam cover with quality fabric cloth, as approved by GE complete all as specified and shown on drg.

Supply hard rubber shoes to the bottom of each leg.

Supply and fix hand rest by using 1st class hard wood covered with fabric cloth

Apply one coat of synthetic enamel paint OG (Make- Asian/ Berger/ Nerolac) to steel frame, complete all as specified and shown on drg.

TABLE STEEL 900 X 900 X 760MM (DRG NO. FD-1009) : Repair/replacement of following parts of ''TABLE STEEL 900 X 900 X 760MM" complete all as specified and shown on drawing :- Top made out of 18mm thick prelaminated particle board exterior grade, Make : Archid/ Novapan /ECCO ISI marked and 4mm thick teak wood beading all around.

Supply hard rubber/PVC shoe to the bottom of each leg

Apply one coat of synthetic enamel paint OG (Make-Asian /Berger /Nerolac) to steel frame , complete all as specified and shown on drg.

TABLE DINING OR STEEL (Drg No FD -165) M & L for carrying out repair/replacement of following parts of Table dining OR as per drawing after dismantling the old parts complete all as specified :- Top using 18/19mm thick prelaminated particle board exterior grade, Make : Archid/ Novapan /ECCO ISI marked and 6mm thick teak wood beading all around.

Preparation of surface of table and apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac) to steel frame , complete all as specified and shown on drg.

BOOK CASE STEEL (Drg No FD-1028) M & L for carrying out repair/replacement of following parts of BOOK CASE STEEL as per drawing after dismantling the old parts complete all as specified :- Repair to the book case such as removing dents from shutters,back, top, bottom and sides; repair and fixing of existing legs by welding, repair and refixing of existing shelves and making it servicable and applying a coat of pink primer where ever required all as directed and specified.

Supply and fix in replacement 3 way lock, 4 levers with duplicate Key MAKE : HARRISON/ GODREJ and other standard makes as approved by GE all as directed and specified.

Supply and fix in replacement CP MS handles complete all as directed and specified.

Supply and fix in replacement unsv glasses of 5mm thick complete all as directed and specified.

Apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac) to steel frame , complete all as specified and shown on drg.

DESK LECTURE STAND STEEL (Drg No FD-1022) M & L for carrying out repair/replacement of following parts of DESK LECTURE STAND STEEL as per drawing after dismantling the old parts complete all as specified :- Top & Shelves using 18mm thick prelaminated particle board exterior grade, Make : Archid/ Novapan /ECCO ISI marked and 6mm thick teak wood beading all around.

Both sides & back using 18mm thick prelaminated particle board exterior grade, Make : Archid/ Novapan /ECCO ISI marked and 6mm thick teak wood beading all around.

Apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac) to steel frame , complete all as specified and shown on drg.

M/s Harmans

SUNIL TRADERS

CITIZEN FURNITURE INDUSTRIES