OT-22

Amount

Dismantling of existing aluminium glazed windows of various sizes and devoluting the retrieved materials to MTPS-II stores as directed by the Engineer in charge including all labour charges, loading, unloading transporting, lead, lift, T&Ps, personal protective equipment, other safety appliances, etc., complete.

Providing and fixing in position aluminium glazed sliding window with 90x30mm outer frame and 40x15mm sliding frame including cost of all materials, 4mm thick smoke glass, rubber beeding, cleat angle, labour charges, lead, lift, T&Ps, personal protective equipment, other safety appliances, etc., complete.

Supplying and fixing in position of mild steel grills using 12 mm square bars at a spacing of 300mm and 100mm c/c at vertical and horizontal direction respectively as directed by the Engineer in charge with adequate nos of holdfasts to fix the grill inside the walls rigidly including cost of fabrication , transporting , lifting and fixing, embedding the hold fasts in walls rigidly with concrete PCC 1:1 1/2:3 ,cost of all materials, one coat of Anti - corrosive primer and Two coats of Aluminium paint, labour charges, Lead, Lift, T&P, etc., complete.

Clearing Scrub and Light jungle and disposing off to a place at-least 1km away from the site as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete.

Earth work excavation for foundation and depositing on bank with initial lead of 10m & initial lift of 2m as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete. (a) In all types of soils such as earth, SDR, medium rock, dense medium rock not requiring blasting.

Earth work excavation for foundation and depositing on bank with initial lead of 10m & initial lift of 2m as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete. (b)Removing hard rock by wedging, chiseling and trimming to proper shape where blasting is prohibited.

Transporting the surplus excavated earth from Item No. 5 with a lead of 1km over the initial lead of 10m and lift of 2m, depositing in places and spreading as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete.

Supplying and Filling river sand / M Sand well watered and consolidated in foundation and basement in layers complying with standard specification as directed by the Engineer in charge including cost of all materials, all labour charges, lead, lift, T&Ps etc., complete.

Providing P.C.C. 1:4:8 using 40mm HBG metal for foundation as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, leads, lifts etc., complete.

Providing R.C.C. M20 GRADE for foundation Raft and slab over the existing wall using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete but excluding cost of steel reinforcement.

Providing steel reinforcement for all RCC works including cutting, bending, binding, tying and placing in position including cost of steel, binding wire, lead, lift etc., complete as directed by the Engineer in charge at site.

Fabricating, supplying and fixing MS Hand rails of required size, Desgin using MS Angles, Flats, square rods MS Sheets and Ornamental fittings etc., as directed by engineer at site including cost of all materials, labour charges, Lead, Lift, T&P , one coat of red oxide primer etc., complete. (32NB MS Pipe, 3.5mm thick)

Painting the MS hand rails work with two coats of approved quality colour enamel paint over a coat of primer of red oxide including cost of all materials, brushes, lead, lift etc., complete.

Floor finishing in CM 1:3, 12mm thick for top of waist slab, steps and service verandah etc., including cost of all materials, labour charges, lead, lift, curing, etc, complete.

Providing Random Rubble masonry in CM 1:5 for basement and side walls, steps as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, leads, lifts etc., complete.

Flush pointing with CM 1:3 for Random Rubble masonry wall including raking the wall as directed by the Engineer in charge at site including cost of all materials, labour chares, curing, T&P, lead, lift etc., complete.

metturassociates