ADDITION ALTERATION AND SPECIAL REPAIR TO BLDG NO P 49 TH THE MALL CDA RESIDENCE and REPAIR TO FLOORING PLASTERING TILING SANITARY FITTINGS AND MISC WORKS IN LEKHANAGAR MD ACCN UNDER AGE B R I and AGE E M OF GE NORTH MEERUT CANTT

Amount

Rough excavation not exceeding 1.5 meter deep in soft/ loose soil and getting out complete all as specified and directed.

Returning, filling in including spreading, leveling watering and well ramming of soft/loose soil in layers not exceeding 25 cm thick each complete all as specified and directed.

Removing excavated material (spoil) not exceeding 50 meter distance and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed.

M&L for laying of hardcore of broken brick of burnt clay bricks (well graded) bricks of gauge not exceeding 63 mm, deposited spreader, leveled in layers not exceeding 15cm thick watered and rammed to a true surface all as specified and directed.

M& L for providing Cement concrete 1:3:6 Type C2 (using 40 mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

M& L for providing Cement concrete 1:4:8 Type D2 (using 40 mm graded crushed stone aggregates), in foundations, filling and mass concrete complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B1, (using 20mm graded stone aggregate) sub base as in floor to receive tiles complete all as specified.

M&L for providing cement concrete 1:3:6 Type C-1 (using 20 mm graded crushed stone aggregates) in cills, copings, kneelers, bed plates, kerbs, hold fast, fillings in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M&L for Preparing old Plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for Preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted Steel surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of synthetic enamel paint complete all as specified and directed.

M & L for providing reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like any thickness; above top of footings; including attached plaster and buttresses including all necessary formwork & finishing exposed concrete surface complete all as specified and directed

M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type B 1 (using 20 mm graded crushed stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 14.00 here-in-before but except bricks

Supply only liquid water proofing compound complete all as specified and directed.

M&L for providing formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, exceeding 1.5m clear span cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

S&F glazed and skeleton shutters 35 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, decorative face veneer on both faces including 6mm thick teck wood lipping on all edges to match with the frame complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exceeding 1.5 Sqm each, complete all as specified and directed. Note :- Quoted rate shall also deemed to be inclusive of necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces and matching with adjoining surfaces complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, including builders hard ware fittings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing of SSR Part-II complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: Stainless steel butt hinges and necessary SS screws shall be paid separately)

S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid wire gauzed WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/m (minimum) including stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including 5.50 mm thick black glass complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing shown on page 178 of SSR Part-II complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F in repairs mild steel helical door spring of size 300 mm fixed on flat iron fixed with screws or nut and bolts after welding the flat iron to MS angle iron / pressed steel chowkhats including welding etc, if necessary complete all as specified and directed.

S&F in repairs mild steel helical door spring of size 150 mm fixed on flat iron fixed with screws or nut and bolts after welding the flat iron to MS angle iron / pressed steel chowkhats including welding etc, if necessary complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F 300 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 12mm dia of shoot / bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S&F stainless steel butt hinges of 100 mm size, complete all as specified and directed.

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open ) 30 mm. complete all as specified and directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F in repairs stainless steel fancy type curtain rod 25mm dia, complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F mild steel work as for Hand rails, half round or other stock section, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.). including necessary riveting and / or welding and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 47.00 here-in-before but 6mm to 8mm dia

S&F rolled mild steel in steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St. - 240. complete all as specified and directed.

S&F factory made steel windows with side hung shutter including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F factory made steel windows with side hung shutter including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F in repairs powder coated GI snap grid frame work for false ceiling suspension system of size of grid 605x605 mm complete all as specified and directed.

S&F 6 mm thick asbestos cement corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofing complete all as specified and directed.

Taking down old existing water proofing treatment from top of RCC/arch slab including taking down of concrete padding or plaster and raking out joints of arch slab and hacking the top of RCC slab, cleaning with water and dispose off rubbish up to 200 meter complete all as specified and directed

M&L for providing average 50 mm thick PCC (1:2:4) type BO, (using 12.5mm graded crushed stone aggregates) as in roof padding finished fair and even without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:4 mixed with WPC @ 200ml per 50kg of weight of cement consumed finished even and smooth without using extra cement on roof surface when concrete is green complete all as specified and directed Note : Water proofing compound shall be measured and paid separately as "Supply only" under respective item of this schedule.

M&L for preparing the new concrete / plastered surfaces by cleaning thoroughly to make it smooth and free from any foreign matter such as fungus, moss, dust etc by wire brushing and dusting and applying a coat of bituminous primer conforming to IS : 3384 - 1986 @ 0.30 liter / Sqm and then pressing & laying 3mm thick Atactic Polypropylene Polymer (APP) modified prefabricated with non woven polyester reinforcement five layer water proofing membrane weighing not less than 3.60 Kg/ Sqm comprising of centre core of 160 - 170gsm non - woven polyester matt sandwiched on both sides by APP polymer modified bitumen duly protected on both sides by 20 micron HMHDPE film by torch on application with gas welding torch (Butane torch), and there over applying a tack coat of 85/25 blown grade bitumen conforming to IS : 702 @ 1.20 Kg / Sqm and finish the top surfaces with aluminium paint (Super Silver Shield) @ 0.150 Ltr / Sqm complete all as specified. as per manufacturer's instructions complete all as specified and directed.

M&L for perforated particle board tiles 18/19 mm thick for insulation and acoustic purposes, 60x60cm in size, fixed with Screws to timber frame work or with staples on snap grid complete all as specified and directed.

M&L, in repair, 18/19mm thick Solid WPC board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to WPC frame work in cup boards, rebated or flat edged fancy handle , Magnite lock complete all as specified and directed.

S&F in repairs 5mm thick PVC Sheet wall Paneling (sandwiched between the longitudinal grid in PVC Sheet) any pattern fixing at site with PVC beading/fillet complete all as specified & directed

M&L for exterior grade, coloured, cement concrete chequered tiles of size 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specifed and directed.

M & L Non skid colored ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or colored cement to match the existing shade laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for light shade vitrified tiles 8mm thick (square / rectangular) area of each tile not exceeding 0.36 Sqm as in floors etc, set & jointed in neat cement slurry and pointed in white or colored cement to match the existing shade laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 63.00 here-in-before but on vertical surfaces such as skirting / dados laid over & including 10mm thick backing coat in cement mortar 1:4.

M&L for Glazed ceramic colored tiles of size 350mmx 250mmx7 mm / 450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or colored cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for one coat of primer using roller complete all as specified and directed.

M&L for Two coat of OBD using roller for painting complete all as specified and directed

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M & L for applying 15mm thick rendering using ready mix plaster bags in cement mortar 1:4 on brick / concrete surfaces of external walls finished even and fair, using water proofing compound @200ml per 50 kg of by weight of cement of as per manufacturer instructions, complete all as specified an directed. Note :- Water proofing compound shall be measured and paid separately as "Supply only" under respective item of this schedule.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing of old decorated surfaces of ceiling ( plastered or un plastered ) including cornices etc and applying Two coat of white wash complete all as specified and directed

M&L for applying 2mm thick wall care putty making surface smooth complete all as specified and directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 Sqm over new surfaces using roller for painting complete all as specified & directed

M&L for complete removal of existing treatment and preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying two coat of oil bound distemper, complete all as specified and directed

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of cement base paint complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazed pins / spring clip and rubbish off the premises complete all as specified and directed.

Taking up or down GI water tubing 15mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as specified and directed

Taking up or down GI water tubing 20mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as specified and directed

S&F GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

S&F GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplying and laying 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fitting in trenches and wall complete all as specified and directed

Dismantling of old water tank (RCC / PVC) exceeding 250 Ltrs & not exceeding 500 Ltrs capacity and Supplied, hoisted and fixed in position white colour rotational molded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

Dismantling of old water tank (RCC / PVC) exceeding 500 Ltrs & not exceeding 1000 Ltrs capacity and Supplied, hoisted and fixed in position white colour rotational molded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs 15 mm bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs gun metal globe or gate valves, 15mm bore, with iron wheel head, screwed both ends for 15mm bore iron pipes or for unions complete all as specified and directed.

S&F in repairs gun metal globe or gate valves, 20mm bore, with iron wheel head ,screwed both ends for 20mm bore iron pipes or for unions complete all as specified and directed.

S&F in repair ball brass valves, high pressure, with polythene float and fly nut complete, screwed for 20 mm bore iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to 15 mm bore pipes complete all as specified and as directed. Make:- Cera Cat Part No F-1017401 / Pearl Cat Part No ARI-015 / Hindware Cat Part No- F-74 0022

S&F in repairs glass corner fancy type of size 250mm x 250mm x 6 to 7mm thick toughened glass with chromium plate railing fixed with fancy type screws complete all as specified and directed.

S&F in repairs CP soap dish brass conforming to the sample kept in the office of Engr-in-Charge complete all as specified and directed.

S&F in repairs concealed CP stop valve heavy body 15mm bore dia with adjustable wall flange complete all as specified and directed.

S&F in repairs stainless steel basket of size 15" x 20" x 4" for modular kitchen cutlery tray / basket with complete arrangement fixed in kitchen cabinet frame complete all as specified and as directed.

S&F in repairs connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs grating doom 100 mm dia with waste hole of PTMT (minimum weight 25 gms) complete all as specified and directed.

S&F in repairs PTMT grating doom 150 mm dia waste hole complete all as specified and directed.

S&F in repairs 110mm bore PVC(SWR) pipes single socketed in any length with rubber ring joint, fixed to wall complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

S&F in repairs 32 mm dia PVC pipe low density (LDPE) of pressure rating 6 Kgf /Sqcm fixed to wall ceiling or laid in floor as waste pipe complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110 mm bore complete all as specified and directed

S&F in repairs PVC (SWR) bends 75 mm bore complete all as specified and directed

S&F in repair PVC (SWR) 110 mm bore junction, single(single 'T') equal or unequal complete all as specified and directed

S&F in repair PVC (SWR) vent Cowl 110 mm bore complete all as specified and directed

S&F in repair PVC (SWR) floor trap 75 mm bore including jointing to waste pipe with cement solvent fixed in cement concrete complete all as specified and directed

S&F in repair PVC (SWR) gully trap 125/100 mm bore setting and jointing with solvent cement complete all as specified and directed

S&F in repairs PVC (SWR) 'S' trap 110/110 mm bore complete all as specified and directed.

S&F in repair 50 mm wide rubber beading for doors of required size complete all as specified & directed.

S&F in repairs 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed in repair complete all as specified & directed

S&F in repairs stack clamps out of 50mm x 5mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified & directed

S&F in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer and providing cast copper alloy capstan head C.P brass pillar tap fancy type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

S&F in repair vitreous china squatting pan 'Orissa pattern' size 580x440mm white with integral foot rests any pattern including provision of lime concrete bedding and making connection with & including PVC P Trap, etc complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

S&F in repairs 125 mm size brass chromium plated shower rose including fixing to steel pipe or union complete all as specified and directed

S&F in repair vitreous china ware EWC combined pattern complete with internal fittings complete all as specified & directed. Make : Cera of Cat Part No S101314L or equivalent Model of Parryware / Hindware as approved by GE.

S&F in repairs glass shelf assembly 60 cm long , 5.5 mm thick glass, CP guard and fixed to wooden plug with CP screws and cup washer as specified complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bedding to 150 mm bore drain pipe including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for SGSW 'grade 'A' drain pipe 150 mm internal dia laid in trenches, jointed and tested complete all as specified and directed.

Demolition and breaking up drain pipes ( SGSW, AC or reinforced concrete) or PVC pipe set in cement mortar for 75mm / 100mm / 110mm internal dia of pipe and including removal from the site complete all as specified and directed.

S&F Fibre glass reinforced translucent plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified & directed

Demolition of brick work or rubble stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Demolition of RCC in floors(other than ground floors beams, chajjas, lending slab and similar suspended works) and including reinforcement cut on required to facilitate demolition and removing of debris & rubbish from the site complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling AC sheet corrugated or semi corrugated sheet of any description as in roof and including removal from the site complete all as specified and directed.

Dismantling of wall or ceiling board (fiber, pulp, insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.

Dismantling of posts or struts (wooden, steel or RCC) of any section, including taking out embedded portion and making good to disturbed surface complete all as specified and as directed.

Carrying out cleaning work day to day complaints such as cleaning floor trap, nahni trap, gully trap cleaning of waste pipe of WHB, cleaning of WC, manhole, sewage line etc complete providing two nos Safaiwala at any location complete all as specified and directed.

Carrying out carpenter work day to day complaints such as resecuring / adjusting of shutter, fixing of water bolt window glass panes etc complete by providing skilled labour at any location complete all as specified and directed. Note :- (i) Store required for repair shall be measured and paid separately. (ii) Cost of minor items like nails, screws etc shall deemed to be in quoted rates of this item.

Carrying out plumbing work day to day complaints such as repair / replacement of fittings and fixture, GI Tubing repair to flushing cistern fixing of bib taps, stop cock etc complete by providing skilled labour at any location complete all as specified and directed. (Store required will be paid separately). Note :- (i) Store required for repair shall be measured and paid separately. (ii) Cost of minor items like yarn, white lead etc shall deemed to be included in quoted rates of this item

Dewatering of Septic tank soakage well and manhole of any depth in any position by pumping out and removing outside Military/Defence land by mechanical means (trolley mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after absorption of water and including providing and spreading required quantity of bleaching powder around the pit or dispose of waste material as per state protocol and washing the top of septic tank & soakage wells and surrounds with fresh water and sprinkling lime to make hygienic complete all as specified and directed.

De-sledging of septic tank of any capacity including connected intercepting chamber, manhole shaft, sludge chamber & filter beds of any description and in any position by pumping out and removing of sludge outside Military/ Defence land by mechanical means (trolley mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after filling of sludge and including providing and spreading required qty of bleaching powder or dispose of waste material complete as per state protocol, including taking down of slab cover and placing the same in existing position complete all as specified and directed.

Taking down carefully any type, battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed

M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS, conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunken zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, including modular cover , modular plate, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing for One light/fan/bell modular point wiring controlled by modular one, one way switch/bell push button complete all as specified and directed.

All as per Srl item No 139.00 here-in-before but One 3 pin 5/6 amps socket outlet point on same board, controlled by modular socket one, one way 5/6 amp modular switch

All as per Srl item No 139.00 here-in-before but One 3 pin 5/6 amps socket outlet point on independent board, controlled by one, one way 5/6 amp modular switch.

M&L for point wiring with 2.5 Sq mm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor, FRLS cable in and including in rigid PVC conduit 20 mm dia or higher medium grade ISI marked complete with all pace conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 2.5 Sq mm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Suitable modular cover , modular plate for One 3 pin socket outlet, 15 amps, with cables 2.5 Sqmm size on independent board, controlled by one, one way 15 Amp modular switch complete all as specified and directed

All as per Srl item No 142.00 here-in-before but with 4 Sqmm multi stranded PVC insulated, unsheathed copper conductor, FRLS, cable in and including in rigid PVC conduit 20 mm dia or higher medium grade.

S&F in repairs Modular Switch, 1 module, 6A, AC, 240V, one way ISI marked complete all as specified and directed

S&F in repairs Modular Switch, 1 module, 16A, AC, 240V, one way ISI marked complete all as specified and directed

S&F in repairs Modular Bell Push, 1 module, 6A, AC, 240V, ISI marked complete all as specified and directed

S&F in repairs Modular Step Fan Regulator, 2 module, 120W, AC, 240V, ISI Marked complete all as specified and directed

S&F in repairs Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed

S&F in repairs Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed

S&F in repairs ceiling rose, surface type, Bakelite, 65 x 25 mm, three terminal complete all as specified and directed.

S&F in repairs LED light fitting 1x22/25 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repairs LED light fitting mirror type with high output diffuser 2 feet,10 watt 220V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs LED Recess mounted, ceiling panel, 2'x2', 36 watts, 240V light fitting with heat exchanger unit complete all as specified and directed

S&F in repairs Fancy light cast Aluminum polyurethane paint (with prior Treatments) bracket with round base with LED Lamp 05 to 11 watts compete all as specified and directed.

S&F in repairs lamp holder PVC body suitable for batten fitting including 01 Nos LED bulb 10 watt complete all as specified and directed.

S&F in repairs single pole and neutral DBs, 8 way, 240 V, double door type suitable for mounting incoming and outgoing MCB’s double pole/single pole complete all as specified and directed.

S&F in repairs MCB, SP, AC, 240 volts 'C' curve capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

S&F in repairs Double pole Isolator 240V, 40A, and making connections complete all as specified & directed.

S&F in repairs SPN enclosure with 2 pin earth plug socket complete with one MCB 20Amps complete all as specified and directed

M&L in repairs sub main wiring with two runs of Single core, 6 Sqmm nominal cross sectional area, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FR- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including one run of continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match with the adjoining surface including taking down old unserviceable sub main wiring complete all as specified & directed. Note :-Two run of 6 Sqmm Sub main wire along with one run of Earth Wire and one Run of Conduit shall be measured as one unit length

S&F Exhaust fan with louver and fixing accessories 230 Volt and 250 mm sweep including taking down old fan complete all as specified and directed. Note: - Old Unserviceable Exhaust Fan shall be deposited in MES Store Yard.

S&F electric water heater storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 liter, complete all accessories such as safety valve, thermostat, NRV, connection piece etc including taking down old unserviceable Geysers complete all as specified and directed. Note: - Old Unserviceable Geysers shall be deposited in MES Store Yard.

M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connected by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed.

vibha associates

M/S AMAR ELEKTRO CENTRE

M/s Kanha Enterprise

Tayal Builders

Adhar Enterprises

High Tech Metal India