Public Libraries

Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means-Up to 3M depth

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310) Mechanical

Filling with carted gravel in trenches,sides of foundations and basement in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water, gravel to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310) Mechanical

Pre construction Anti termite is a process in which chemical toxic to sub terrain termites is apply/ inject into soil during early stage of building Construction Treatment of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the columns , plinth beams (Back filling) walls and floor junction, external perimeters, along retaining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around columns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for spraying, rodding, cost of overheads and contractors profit, etc. complete for furnished item of work as per the approval of the Engineer-in-charge (Plinth area measurements will be taken for payment)

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. FOOTINGS

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. PEDESTALS

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. PLINTH BEAMS

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. COLUMNSGround Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. COLUMNSFirst Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. COLUMNSSecond Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. COLUMNSTerrace Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. RCC WALLS 200mm thickGround Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. LINTELSGround Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. LINTELSFirst Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. LINTELSSecond Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. STEPSGround Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. STEPSFirst Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. STEPSSecond Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. BEAMSGround Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. BEAMSFirst Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. BEAMSSecond Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. BEAMSTerrace Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. SLAB 125MM THICKGround Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. SLAB 125MM THICKFirst Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. SLAB 125MM THICKSecond Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. SLAB 125MM THICKTerrace Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. SLAB 175MM THICKGround Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. SLAB 175MM THICKFirst Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. SLAB 175MM THICKSecond Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Chajja / SunshadeGround Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Chajja / SunshadeFirst FloorFirst Floor

Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Chajja / SunshadeSecond Floor

Supplying, fitting and placing thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 grade / as per structural drawings confirming to IS 1786-1985) Category-B Steeel Major steel manufacturers with minimum installed Production of 2 Lakh MT per annum (GOEL, SHYAM, JAI BALAJI, AFSTAR/MSLIFETMT. RADHA TMT, SUGUNA TMT) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work ( APSS No.126)Ground Floor

Supplying, fitting and placing thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 grade / as per structural drawings confirming to IS 1786-1985) Category-B Steeel Major steel manufacturers with minimum installed Production of 2 Lakh MT per annum (GOEL, SHYAM, JAI BALAJI, AFSTAR/MSLIFETMT. RADHA TMT, SUGUNA TMT) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work ( APSS No.126)First Floor

Supplying, fitting and placing thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 grade / as per structural drawings confirming to IS 1786-1985) Category-B Steeel Major steel manufacturers with minimum installed Production of 2 Lakh MT per annum (GOEL, SHYAM, JAI BALAJI, AFSTAR/MSLIFETMT. RADHA TMT, SUGUNA TMT) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work ( APSS No.126)Second Floor

Supplying, fitting and placing thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 grade / as per structural drawings confirming to IS 1786-1985) Category-B Steeel Major steel manufacturers with minimum installed Production of 2 Lakh MT per annum (GOEL, SHYAM, JAI BALAJI, AFSTAR/MSLIFETMT. RADHA TMT, SUGUNA TMT) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work ( APSS No.126)3rd (F4)

Providing Mild Steel Bars, Structural Steel, (Fe 250 grade as per IS 432) I.e., Angles, Channels and I sections of different sizes, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, binding wire of 20SWG, cover blocks, chairs, overlaps, spacers, dowels, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work.. Ground Floor

Providing Mild Steel Bars, Structural Steel, (Fe 250 grade as per IS 432) I.e., Angles, Channels and I sections of different sizes, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, binding wire of 20SWG, cover blocks, chairs, overlaps, spacers, dowels, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work.. First Floor

Providing Mild Steel Bars, Structural Steel, (Fe 250 grade as per IS 432) I.e., Angles, Channels and I sections of different sizes, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, binding wire of 20SWG, cover blocks, chairs, overlaps, spacers, dowels, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work.. Second Floor

Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand(50% river sand & 50 % Manufacture sand), blocks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges(with MS jack prop Cuplock pipes Scaffolding), constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290 x 225 x 140) Ground Floor

Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand(50% river sand & 50 % Manufacture sand), blocks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges(with MS jack prop Cuplock pipes Scaffolding), constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290 x 225 x 140) First Floor

Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand(50% river sand & 50 % Manufacture sand), blocks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges(with MS jack prop Cuplock pipes Scaffolding), constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290 x 225 x 140) Second Floor

Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand(50% river sand & 50 % Manufacture sand), blocks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges(with MS jack prop Cuplock pipes Scaffolding), constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290 x 225 x 140) Terrace Floor

Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand(50% of river sand & 50 % of manufactured sand), blocks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges(MS Jackprof ,Cuplock ) and all labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) Ground Floor

Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand(50% of river sand & 50 % of manufactured sand), blocks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges(MS Jackprof ,Cuplock ) and all labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) First Floor

Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand(50% of river sand & 50 % of manufactured sand), blocks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges(MS Jackprof ,Cuplock ) and all labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) Second Floor

Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal and screened sand laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal sand (with 50% river sand & 50% manufactured sand) and water, overheads & contractors profit, complete for finished item of work. (APSS No.701 & 710)Ground Floor

Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)Ground Floor

Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)First Floor

Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)Second Floor

Providing Risers of 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work. (S.S.701 & special)Ground Floor

Providing Risers of 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work. (S.S.701 & special)First Floor

Providing Risers of 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work. (S.S.701 & special)Second Floor

Providing Treads of 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work. (S.S.701 & special)Ground Floor

Providing Treads of 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work. (S.S.701 & special)First Floor

Providing Treads of 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work. (S.S.701 & special)Second Floor

Providing cladding with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours (other than black) in single piece set over a base coat of CM (1:3) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work. (APSS No.701 & 707)Ground Floor

Providing cladding with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours (other than black) in single piece set over a base coat of CM (1:3) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work. (APSS No.701 & 707)First Floor

Providing cladding with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours (other than black) in single piece set over a base coat of CM (1:3) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work. (APSS No.701 & 707)Second Floor

Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours (other than black) in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work (APSS No.701 & 707)Ground Floor

Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours (other than black) in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work (APSS No.701 & 707)First Floor

Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours (other than black) in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work (APSS No.701 & 707)Second Floor

Providing sills of width 250mm with 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges on both edges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work. (S.S.701 & special)Ground Floor

Providing sills of width 250mm with 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges on both edges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work. (S.S.701 & special)First Floor

Providing sills of width 250mm with 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges on both edges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work. (S.S.701 & special)Second Floor

Flooring with Non-skid / Glazed red or white full body Ceramic tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and with Nylon spacers filling the joints with epoxy emulsion grout / synthetic / resin adhesive with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)First Floor

Flooring with Non-skid / Glazed red or white full body Ceramic tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and with Nylon spacers filling the joints with epoxy emulsion grout / synthetic / resin adhesive with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)Second Floor

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)Ground Floor

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)First Floor

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)Second Floor

Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.Ground Floor

Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.First Floor

Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.Second Floor

Dadooing to walls with any color glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and thickness between 7-8 mm 1st quality of any colour and finish in all shades and designs set over a base coat of CM (1:5) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive with pigment of matching shade to match the shade of tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar as directed by the Engineer-in-charge, curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)Ground Floor

Dadooing to walls with any color glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and thickness between 7-8 mm 1st quality of any colour and finish in all shades and designs set over a base coat of CM (1:5) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive with pigment of matching shade to match the shade of tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar as directed by the Engineer-in-charge, curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)First Floor

Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP, CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)Ground Floor

Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP, CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)First Floor

Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP, CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)Second Floor

External plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6) 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)536

External plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6) 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)First Floor

External plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6) 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)Second Floor

External plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6) 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)Terrace Floor

Internal Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)Ground Floor

Internal Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)First Floor

Internal Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)Second Floor

Internal Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)Terrace Floor

Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 mm of any shades set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade, cost of all materials like cement, sand (with 50% river sand & 50% manufactured sand) water and tiles etc., overheads and contractors profit, complete for finished item of work.Ground Floor

Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer. Ground Floor

Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer. First Floor

Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer. Second Floor

Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer. Terrace floor

Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats + 1 coat primer Ground Floor

Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats + 1 coat primer First Floor

Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats + 1 coat primer Second Floor

Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats + 1 coat primer Terrace floor

Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls - :-Internal Colouring - Providing Putty. Ground Floor

Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls - :-Internal Colouring - Providing Putty. First Floor

Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls - :-Internal Colouring - Providing Putty. Second Floor

Providing and applying Exterior grade texture ready mixed paint with sand texture added sand particles Acrylic copolymers and mineral compounds, bactericides and various additives having VOC (Volatile Organic Compound) content less than 30 grams/ Lit or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds ) for:-External Colouring - Providing / Texture to External walls.Ground Floor

Providing and applying Exterior grade texture ready mixed paint with sand texture added sand particles Acrylic copolymers and mineral compounds, bactericides and various additives having VOC (Volatile Organic Compound) content less than 30 grams/ Lit or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds ) for:-External Colouring - Providing / Texture to External walls.First Floor

Providing and applying Exterior grade texture ready mixed paint with sand texture added sand particles Acrylic copolymers and mineral compounds, bactericides and various additives having VOC (Volatile Organic Compound) content less than 30 grams/ Lit or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds ) for:-External Colouring - Providing / Texture to External walls.Second Floor

Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., including overheads & contractors profit complete for finished item of work for:-Polishing to wood work - Melamine Polishing to Wood Work.

Painting to new wood work with luppam finish to give even & smooth surface and painting two coats with ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit over wood primer coat, including cost and conveyance of all materials to site, all labour charges , including sand paper on lappam coats for neat even and glossy surface, including cost of overheads & contractors profit, etc. complete for finished item of work as directed by Engineer-in-charge during exection - for all floors. Ground Floor

Painting to new wood work with luppam finish to give even & smooth surface and painting two coats with ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit over wood primer coat, including cost and conveyance of all materials to site, all labour charges , including sand paper on lappam coats for neat even and glossy surface, including cost of overheads & contractors profit, etc. complete for finished item of work as directed by Engineer-in-charge during exection - for all floors. First Floor

Painting to new wood work with luppam finish to give even & smooth surface and painting two coats with ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit over wood primer coat, including cost and conveyance of all materials to site, all labour charges , including sand paper on lappam coats for neat even and glossy surface, including cost of overheads & contractors profit, etc. complete for finished item of work as directed by Engineer-in-charge during exection - for all floors. Second Floor

Painting to new wood work with luppam finish to give even & smooth surface and painting two coats with ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit over wood primer coat, including cost and conveyance of all materials to site, all labour charges , including sand paper on lappam coats for neat even and glossy surface, including cost of overheads & contractors profit, etc. complete for finished item of work as directed by Engineer-in-charge during exection - for all floors. Terrace floor

Painting to new iron works with 2 coats of ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including cost of overheads & contractors profit for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats Ground Floor

Painting to new iron works with 2 coats of ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including cost of overheads & contractors profit for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats First Floor

Painting to new iron works with 2 coats of ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including cost of overheads & contractors profit for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats Second Floor

Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia (outer 60.30mm dia) pipe and 2mm thick medium class, 25mm dia (33.20 outer dia) horizontal pipe 3 Nos and vertical posts of 50mm dia (60.30 mm outer dia) 1.6mm thick medium class fixed with using bonding agent and anchor fastner and welding, drilling of holes for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit etc., complete for finished item of work. Ground Floor

Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia (outer 60.30mm dia) pipe and 2mm thick medium class, 25mm dia (33.20 outer dia) horizontal pipe 3 Nos and vertical posts of 50mm dia (60.30 mm outer dia) 1.6mm thick medium class fixed with using bonding agent and anchor fastner and welding, drilling of holes for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit etc., complete for finished item of work. First Floor

Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia (outer 60.30mm dia) pipe and 2mm thick medium class, 25mm dia (33.20 outer dia) horizontal pipe 3 Nos and vertical posts of 50mm dia (60.30 mm outer dia) 1.6mm thick medium class fixed with using bonding agent and anchor fastner and welding, drilling of holes for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit etc., complete for finished item of work. Second Floor

Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks and Hold Fasts for finished item of work. (APSS No. 402): HAND MIXINGGround Floor

Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks and Hold Fasts for finished item of work. (APSS No. 402): HAND MIXINGFirst Floor

Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks and Hold Fasts for finished item of work. (APSS No. 402): HAND MIXINGSecond Floor

Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks and Hold Fasts for finished item of work. (APSS No. 402): HAND MIXINGGround Floor

Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks and Hold Fasts for finished item of work. (APSS No. 402): HAND MIXINGFirst Floor

Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks and Hold Fasts for finished item of work. (APSS No. 402): HAND MIXINGSecond Floor

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).Terrace Floor

Supply and fixing of Double shutter door with fanlight at top (MAIN DOOR), using Best Teak wood frame of section 100 x 150mm and Best teak wood fully panelled Shutters i.e., top rail, bottom rail , middle rail and styles of section 150 x 45mm and 20mm thick best teak wood planks fixed with 12mm x 12mm best teak wood beading alround, Tinted - Bronze/ Green Glass 6 mm thick with 12mm x 12mm teak wood beading and 2 Nos of 10mm MS square bars in fixed fan light portion as per approved drawing, including supply and fixing of 6 Nos MS hold fasts of size 300mm x 40mm x 5mm, including cost of fixtures such as 6 Nos Brass Butt hinges (IS:205)- 150 mm Long, 1 No Brass latch heavy 300 mm long,1 No Brass Aldrops (IS:2681) 300 mm long, 2Nos of Brass Tower Bolt-10 mm Bolt (IS:204) 300 mm Long at top, 4 Nos Brass fancy handles 200 mm long, 2 Nos heavy duty brass door stoppers, 2 Nos rubber/nylon bushes inside including fixing the fixtures to the door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutters to the frame, overhead and contractor's profit etc., complete for finished item of work.

Supplying and fixing DOUBLE SHUTTER DOOR WITH FIXED Fanlight at Top using factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fasts, flush shutters with solid bond wood block board type with teak ply on both faces: 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as 2 No tower bolt of 200x10mm dia, 1 No. Aldrops - 300 mm long, 1No. Latche-300mm long, 4 Nos. handles of 150 mm size & 2 No. Heavy duty door stopper, 2 no rubber bushes and 4mm thick pin headed glass in the ventilator portion including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (Door size 4'0" x 8'6") - with Ventilator - D2

Supplying and fixing SINGLE shutter door using factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fasts, flush door shutters of 35 mm thick solid bond wood block board type with teak ply on both faces conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as 1 No tower bolt of 200x10mm dia, 1 No. Aldrops - 300 mm long, 1No. Latche-300mm long, 2 Nos. handles of 150 mm size & 1 No. Heavy Duty door stopper & 1 no rubber bushe , including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (Door size : 1.05X2.15m) - D3 teak veneer on both facesGround Floor

Supplying and fixing SINGLE shutter door using factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fasts, flush door shutters of 35 mm thick solid bond wood block board type with teak ply on both faces conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as 1 No tower bolt of 200x10mm dia, 1 No. Aldrops - 300 mm long, 1No. Latche-300mm long, 2 Nos. handles of 150 mm size & 1 No. Heavy Duty door stopper & 1 no rubber bushe , including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (Door size : 1.05X2.15m) - D3 teak veneer on both facesFirst Floor

Supplying and fixing SINGLE shutter door using factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fasts, flush door shutters of 35 mm thick solid bond wood block board type with teak ply on both faces conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as 1 No tower bolt of 200x10mm dia, 1 No. Aldrops - 300 mm long, 1No. Latche-300mm long, 2 Nos. handles of 150 mm size & 1 No. Heavy Duty door stopper & 1 no rubber bushe , including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (Door size : 1.05X2.15m) - D3 teak veneer on both facesSecond Floor

Supplying and fixing SINGLE shutter door using factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fasts, flush door shutters of 35 mm thick solid bond wood block board type with teak ply on both faces conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as 1 No tower bolt of 200x10mm dia, 1 No. Aldrops - 300 mm long, 1No. Latche-300mm long, 2 Nos. handles of 150 mm size & 1 No. Heavy Duty door stopper & 1 no rubber bushe , including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (Door size : 1.05X2.15m) - D3 teak veneer on both facesTerrace Floor

Supplying and fixing SINGLE shutter toilet door using factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fasts, flush door shutters of 30mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping), providing and fixing 1 mm thick PVC door cladding to the flush doors shutter pasted with synthetic glue conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as 1 No tower bolt of 200x10mm dia, 1 No. Aldrops - 200 mm long, 1No. Latche-200mm long, 2 Nos. handles of 100 mm size & & 1 no rubber bushes, including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (Door size : 0.75X2.15m) - TOILET DOORS-D4First Floor

Supplying and fixing SINGLE shutter toilet door using factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fasts, flush door shutters of 30mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping), providing and fixing 1 mm thick PVC door cladding to the flush doors shutter pasted with synthetic glue conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as 1 No tower bolt of 200x10mm dia, 1 No. Aldrops - 200 mm long, 1No. Latche-200mm long, 2 Nos. handles of 100 mm size & & 1 no rubber bushes, including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (Door size : 0.75X2.15m) - TOILET DOORS-D47383

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) combination villa casement window - (open-fixed-open with top fixed in 2 parts with grill fixed inside so that the shutters to be openable outside with mesh shutters opening inside) in white colour duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum 6 PHR OF TiO2 and not more than 10 PHR of CaCo3 for every 100 parts of PVC resin) of sections not less than (109mm x 58mm x 2.20mm for outer frames, 78/40mmx60mmx2.20mm for casement shutter frames capable of mounting single glazing and double glazing system, fixed Mullion T made of 109x79mm reinforced with hot dip galvanized upto 120 GSM of minimum thickness of 1.2mm for outer frame/1.5mm for Sash prefabricated & welded through fusion welding including 10mm square guard bars with 6" (152.4mm) pitch. The window sash shall be fitted with 5mm float Glass reputed make duly fixed with black color Gasket for sash & Glazing bead and accessories for casement window - friction hinges of stainless steel grade 304-2 no.s per sash, handle 1 no.per sash, Espag locking system suitable concealed 1 No.per sash provided with raiser wedges for smooth operation and the system is to be installedat site using anchor fasteners, UV Resistant silicon sealant outside and paintable silicon sealant inside including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.Ground Floor

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) combination villa casement window - (open-fixed-open with top fixed in 2 parts with grill fixed inside so that the shutters to be openable outside with mesh shutters opening inside) in white colour duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum 6 PHR OF TiO2 and not more than 10 PHR of CaCo3 for every 100 parts of PVC resin) of sections not less than (109mm x 58mm x 2.20mm for outer frames, 78/40mmx60mmx2.20mm for casement shutter frames capable of mounting single glazing and double glazing system, fixed Mullion T made of 109x79mm reinforced with hot dip galvanized upto 120 GSM of minimum thickness of 1.2mm for outer frame/1.5mm for Sash prefabricated & welded through fusion welding including 10mm square guard bars with 6" (152.4mm) pitch. The window sash shall be fitted with 5mm float Glass reputed make duly fixed with black color Gasket for sash & Glazing bead and accessories for casement window - friction hinges of stainless steel grade 304-2 no.s per sash, handle 1 no.per sash, Espag locking system suitable concealed 1 No.per sash provided with raiser wedges for smooth operation and the system is to be installedat site using anchor fasteners, UV Resistant silicon sealant outside and paintable silicon sealant inside including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.First Floor

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) combination villa casement window - (open-fixed-open with top fixed in 2 parts with grill fixed inside so that the shutters to be openable outside with mesh shutters opening inside) in white colour duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum 6 PHR OF TiO2 and not more than 10 PHR of CaCo3 for every 100 parts of PVC resin) of sections not less than (109mm x 58mm x 2.20mm for outer frames, 78/40mmx60mmx2.20mm for casement shutter frames capable of mounting single glazing and double glazing system, fixed Mullion T made of 109x79mm reinforced with hot dip galvanized upto 120 GSM of minimum thickness of 1.2mm for outer frame/1.5mm for Sash prefabricated & welded through fusion welding including 10mm square guard bars with 6" (152.4mm) pitch. The window sash shall be fitted with 5mm float Glass reputed make duly fixed with black color Gasket for sash & Glazing bead and accessories for casement window - friction hinges of stainless steel grade 304-2 no.s per sash, handle 1 no.per sash, Espag locking system suitable concealed 1 No.per sash provided with raiser wedges for smooth operation and the system is to be installedat site using anchor fasteners, UV Resistant silicon sealant outside and paintable silicon sealant inside including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.Second Floor

Providing, supplying & fixing of Fixed Louvered Ventilator made from multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists of a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.First Floor

Providing, supplying & fixing of Fixed Louvered Ventilator made from multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists of a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.Second Floor

Providing and Fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.6mm thick as per the design requirement & calculations as given in IS: 875. Primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm. Including 5mm thick Ocean Blue reflective glass. Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry wall should be with self-expanding cap & screws. The rate is inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and scaffolding charges, form work , overheads & contractors profit etc., complete for finished item of work in all floors.First Floor

Providing and Fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.6mm thick as per the design requirement & calculations as given in IS: 875. Primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm. Including 5mm thick Ocean Blue reflective glass. Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry wall should be with self-expanding cap & screws. The rate is inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and scaffolding charges, form work , overheads & contractors profit etc., complete for finished item of work in all floors.Second Floor

S&F of pre-cast RCC Grills of any design of 50 mm thick manufactured with M-30 grade of concrete using vibro-compaction process using joint less FRP moulds to achieve shuttering finish and adequately reinforced for long use and to prevent damage during handling, transportation & erection etc., including cost and conveyance of all materials and labour charges etc. complete finshed item of workGround Floor

S&F of pre-cast RCC Grills of any design of 50 mm thick manufactured with M-30 grade of concrete using vibro-compaction process using joint less FRP moulds to achieve shuttering finish and adequately reinforced for long use and to prevent damage during handling, transportation & erection etc., including cost and conveyance of all materials and labour charges etc. complete finshed item of workFirst Floor

S&F of pre-cast RCC Grills of any design of 50 mm thick manufactured with M-30 grade of concrete using vibro-compaction process using joint less FRP moulds to achieve shuttering finish and adequately reinforced for long use and to prevent damage during handling, transportation & erection etc., including cost and conveyance of all materials and labour charges etc. complete finshed item of workSecond Floor

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia Gypsum Ltd specification.First Floor

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia Gypsum Ltd specification.Second Floor

Reinforced Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for Dummy columns using 40mm size (SS5) hard Granite metal from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, machine mixing, vibrating, laying concrete, curing , overheads & contractors profit, centering using CUPLOCK SCAFFOLD SYSTEM USING MS STEEL PLATE SHUTTERS, etc. including all operational, incidental and labour charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work upto un supported height up to 3.66 m for dummy columns (APSS No. 402)Terrace Floor

Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc., complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) Terrace Floor

Providing Mild Steel Bars, Structural Steel, (Fe 250 grade as per IS 432) I.e., Angles, Channels and I sections of different sizes, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, binding wire of 20SWG, cover blocks, chairs, overlaps, spacers, dowels, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work..

Supply and fixing of roofing with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove, including cost and conveyance of all materials, all operational, incidental labour charges, overheads and contractor's profit complete for finished item of work.

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for RCC work including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.

Demolishing and disposal of Unreinforced cement concrete upto 15 cm thicknes including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for Brick work including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc.,complete and stacking them within 100 metre lead Not exceeding 3 sq.m. in area including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 metre lead Exceeding 3 sq.m. in area including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.

Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 1524mm (5'.0") depth and refilling, watering and tamping, including cost and conveyance of all materials to site, all operational,incidental, labour charges, overheads and contractors profit, etc complete for finished item of work152.4 mm (6") dia

Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 1524mm (5'.0") depth and refilling, watering and tamping, including cost and conveyance of all materials to site, all operational,incidental, labour charges, overheads and contractors profit, etc complete for finished item of work203.2 mm (8") dia

Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & constructing Brick masonry in CM 1:6 prop. over a C.C. (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.8 mm x 288.6mm (12" x 9") C.I. frame and hinged cover of standard make as directed by the Engineer-in-charge including cost and conveyance of all materials to site, all operational,incidental, labour charges, overheads and contractors profit, etc. complete for finished item of work. (APSS No 1326)

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg. including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractors profit, etc. complete for finished item of work.

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, overheads and contractors profit, etc., complete for finished item of work as per Standard specification. 3'-0" Depth

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, overheads and contractors profit, etc., complete for finished item of work as per Standard specification. 5'-0" Depth

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - CPVC Pipes of 41.30mm OD Pipe - SDR 13.5

Supplying & fixing Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty as approved by the Engineer including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.

Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means-Up to 3M depth

Supplying & fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc. complete for finished item of work.

Supplying and fixing approved make wash down European Water Closet of 1st quality conforming to IS:2556-Part-2- 2004 of white glazed with 'S' trap with CI short Connector & 4" dia CP thimble pipe: 150 mm long, best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996, PVC low level system with internal components & short bend: 10 Litres capacity Single Flush, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and 15 mm nominal size PVC connection with brass union nut C.P coated all of approved make, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work.

Supplying & Fixing Indian make WHITE Flat Back Wash Hand Basin of size 550 x 400 mm with Single C.P. Pillar cock 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931, 15 mm nominal size PVC connection with brass union nut C.P coated, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality and standard CI brackets including wooden block, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects.

Supply and fixing CP finish brass soap dish of approved make with screws, including cost and conveyance of all materials to site, all operational,incidental , labour charges and overhead & contractor's profit etc. complete for finished item of work as directed by Engineer-in-charge.

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost and conveyance of all materials to site, all operational,incidental , labour charges etc. overhead & contractor's profit etc. complete for finished item of work in all floors as directed by Engineer-in-charge.

S & F 25 mm nominal size dia & 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.

S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded conenction conforming to IS 8931, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.

S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - CPVC Pipes of 22.20mm OD Pipe - SDR 13.5

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge- CPVC Pipes of 28.60mm OD Pipe - SDR 13.5

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - CPVC Pipes of 41.30mm OD Pipe - SDR 13.5

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - CPVC Pipes of 54.00mm OD Pipe - SDR 13.5

S & F Bronze Gate/ Globe valve as per IS - 778 Class - I,Indian make heavy type as approved by the Engineer including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.20 mm Nominal Bore

S & F Bronze Gate/ Globe valve as per IS - 778 Class - I,Indian make heavy type as approved by the Engineer including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.25 mm Nominal Bore

S & F Bronze Gate/ Globe valve as per IS - 778 Class - I,Indian make heavy type as approved by the Engineer including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.32 mm Nominal Bore

S & F Bronze Gate/ Globe valve as per IS - 778 Class - I,Indian make heavy type as approved by the Engineer including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.40 mm Nominal Bore

Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc., complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) 75mm dia

Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc., complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) 110mm dia

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work.

Constructing Brick masonry support for G.I pipe with C.M 304.8 x 228.6 x228.6 mm size including plastering including cost and conveyance of all materials to site, all operational,incidental , labour charges, overhead & contractor's profit etc complete for finished item of work in all floors as directed by Engineer-in-charge.

Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING

Supply and Laying of ISI 25mm outer dia heavy grade with IS:9537 part 3 rigid PVC pipe concealed in Roof Slabs with all required PVC / Metallic Deep Boxes including masonary work and labour charges etc., complete.

Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with Metallic junction boxes and all required accessories including masonary work for light, fan and separate plug point with supply and fixing of suitable size Metal Modular deep box including all labour charges etc., complete.

Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with all required Metallic Junction Boxes including masonary work and labour charges etc., complete for Run of mains.

Wiring with run of 2 of 1.5 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe, ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose/batten holder of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B.

Wiring with run of 2 of 1.5 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing PVC conduit pipe,Ferrules including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 2way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring,ferrules including cost and conveyance of all material and all labour charges etc., complete for Stair case points in N.R.B .

Wiring with run of 3 of 1.5 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe,ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in N.R.B.

Supply and fixing of ISI Marked 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A/10A 1way Modular switch , 3 module box with cover frame in common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B.

Wiring with run of 3 of Supply of 1.5 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing conseled PVC pipe,frrules including Supply and fixing of ISI Marked 6A/ 10A- 3/2 pin Modular socket with shutter, 6A/10A 1way Modular switch with required cover frame including connections, cost and conveyance of all material and all labour charges etc., complete for seperate plug points in N.R.B. / R.B.

Supply and fixing of ISI marked 16A/20A 1 way Combi Socket Modular Socket with shutter, 16A / 6A 1 Way 1 Module Modular Switch on a 3 Modular box with suitable cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B.

Supply and Run of 3 of 2.5 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable. in existing pipe for run of mains inlcuding connections and all labour charges etc., complete.

Supply and Run of 3 of 4.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete.

Supply and Run of 3 of 6.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete.

Supply and Run of 5 of 6.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete.

Supply and Run of 5 of 10.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete.

Supply and fixing of Electronic Musical Bell including giving connections, cost of all accessories and labour charges etc., complete.

Supply and fixing of Ding Dong Bell in lieu of ceiling rose including giving connections, cost of all accessories and labour charges etc., complete.

Supply, transportation and Fixing of 22W, +/- 10% , >/ 2300 lumens, 1200mm length LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc., complete with 5 years warranty with BIS Certification LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.

Supply, Transportation and Fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.0, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient as approved by the Department.

Supply and fixing of 2 Module Modular type Electronic step type Fan Regulator with connections and Labour charges etc complete.Modular boxes and switches Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision

Supply, Transportation and Fixing  of 8" BLDC exhaust fan with necessary accessories etc., with all labour charges etc., complete as directed at site.Makes : Atomberg / Crompton / Havells / Orient.

Supply and fixing 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 4 pole Incomer of 40A FP Isolator and 12Nos. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete.

Supply and fixing 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 4 pole Incomer of 63A FP Isolator and 12No. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. DB Makes :Legrand Isolator Makes : Legrand-DX3 MATERIAL

Supply and fixing of 8 way VTPN DB IP 43 Protection as per IS:13032 With and suitable for 1 No 125A 4 pole MCCB Incomer and 4 Nos 63A 10 kA ISI Marked C/D curveTP MCBs and 4 Nos 40A 10 kA ISI Marked C/D curveTP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter Connections and labour charges for Flush Mounting etc., complete. including alll connections and labour charges for Flush Mounting etc., complete.DB Makes :Legrand MCCB Make: Legrand -DP X3MCB Makes : Legrand-DX3

"Supply and fixing of DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA ISI Marked C/D curveSP MCB including internal connection and labour charges for Flush Mounting etc., complete.DB Makes :Legrand MCB Makes : Legrand-DX3

Supply and Run of LAN Cable cat - 6 UTP cable of makes D Link / AMP / Molex / Legrand / Krone / Finolex / Polycab in existing pipe inlcuding all labour charges etc., complete as desired by the department (derived from Sd 3.1.2)

Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate of makes D Link / AMP / Molex / Legrand / Krone on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B.

Supply and run of 2 pair telephone cable 0.5mm copper, in the existing PVC pipe including all labour charges etc complete.

Supply and run of 20 Pair telephone Copper wire., in the existing PVC pipe including all labour charges etc complete.

Supply of 20 pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement.

Supply and fixing of Modular socket type Telephone jack with Connector on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. Modular boxes and switches Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision

Supply and fixing of 7 feet length moulded patch cord including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone.

Supply and fixing of 3 feet length moulded patch cord including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone.

Supply, Installation , Testing , Commissioning of 24 Port, 4 GIGA fibre slots (SFP), power budget 250 W. 10 / 100 / 1000 Gigabit PoE switch with GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link.

Supply, Installation, Testing and Commissioning of unloaded 24 port patch panel with IO separate Makes : Digisol / TP Link / D link. / Legrand

Supply and installation of 9U wall 600 mm width x 500 mm depth UL certified wall mounting net work rack with sheet steel revited metal frame,top and bottom cover with brush cable entry,confirming to following standards IEC 60529,EN 60529 ( IP 20), IEC 62262 EN 62622 (IK08) , DIN 41494, EIA 310, IEC 60927 including all accessories like horizontal PDU, metal cable manager, hardware packet and the cantilever shelf etc.,complete. Makes : Vallrack (Legrand) / Netrack.

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labourcharges complete, as per IS specifications 732/1982 (Part II)

Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).

Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (1.18Kgs/1Mtr)

Supply and Run of 25mm x 6mm copper strip (Cuurrent Carrying Capacity 350A) including cost of all accessories and labour charges etc., complete. (1.34Kgs/1Mtr)

Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted MV panel of double door type made out of No.14 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) for Power load and Generator load separately, supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The panel shall be got manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials & labour charges.

Supply of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex

Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex

Earth work excavation of Trench in hard ground soil up to a depth of 0.9Mtr and laying of U.G cables 70 to 400Sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.

Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., comkplete (as directed by departmental official).

Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 120 Sqmm to 95.0 Sq.mm 3.5 core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete. Makes: SMI / Commet / Dowels.

Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for Up to 16.0 Sq.mm 4 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete. Makes: SMI / Commet / Dowels.

Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 95 Sq.mm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent make as approved by the department

Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 16 Sq.mm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent make as approved by the department

Supply and fixing of PVC synthetic elastomer electrically insulated mat with Class B insulation conforming to IS: 15652-2006 having 2.5mm thickness upto 11KV.

Providing & Fixing of Shock instrution chart in English / Hindi / Telugu duly framed with front glass.