8871/E8

Amount

Taking down existing roof membrane with concrete padding upto original roof and removing the debris from the site etc complete all as specified and directed

Demolition of cement concrete (Un-reinforced) in ground floor and paving nexc 15cm thick above or below GL complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed.

Dismantalling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and directed

Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed

Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc. complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed and directed

Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm complete all as specified and directed.

All as item No. 9.00 here-in-before but exc 1.5 Sqm and nexc 4.0 Sqm each.

Taking down of shutters of any description n. exc 1.0 Sqm each complete all as specified and directed

Taking down of shutters of any description exc 1.0 but n. exc 2.0 Sqm each complete all as specified and directed

Taking up or down steel tubing 15mm dia and connection complete all as specified and directed

All as per item No. 13.00 here-in-before but 20mm dia bore.

M&L for providing cement concrete type B-0 (Using 12.50mm graded stone aggregate) as in padding and benching & filleting all as specified and directed.

M&L Plain Cement Concrete type E2 (1:5:10) using 40 mm graded aggregate as in Mass Concrete of sunken floor complete all as specified and as directed.tone aggregate) as in padding and benching & filleting all as specified and directed.

M&L for 10mm thick screed bed or bedding over roof surfaces when concrete is still green with and including WPC in cement mortar 1:3 complete all as specified and directed

M&L for Preparation of plastered surfaces of roof and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified and directed.

M&L for Preparation of plastered surfaces of roof and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm. The membrane shall be laid using butane torch and sealing all joints etc all as specified and directed.

M&L Cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, with grey cement and no pigment, jointed in neat cemnt slurry in floor/roof filled with joints with sealent complete all as specified and as directed.

M&L half brick thick brick work with fly ash bricks pulverizes straigth or curved on plan exc 6m mean radius of class designation 75(kgf/cm2) built in CM (1:4) complete all as specified and directed

M&L for applying polymer modified cement mortar rendering 15mm thick in CM 1:3 on wall duly mixing polymer modifier "Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd" or "Hind Styrene BR of Hindcon Chemical Ltd" or equivalent make of M/s Pidilite Industries @ 7 Litre per bag of cement complete finished even and smooth without using extra cement complete all as specified and as per manufacturer's specification.

M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & smoth without using extra cement complete all as specified and directed

M&L rendering 15mm thick in CM (1:4) in two layers ( 10+5) on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement and using water proofing compound on top layer i.e. 5 mm thick as per manufacturer instruction complete all as specified and directed

M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smooth without using extra cement complete all as specified and directed

Supply only liquid water proffing compound as specified

M&L for Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good cutting not exc 10Cm girth complete all as specified and directed

S&F for 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F for 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F in repair for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed.

All as per item No. 30.00 here in before but double socketed complete all as specified and directed.

S&F in repair PVC (SWR) bend any radius 110mm bore complete all as specified and directed

S&F in repair PVC (SWR) junction single (single T) equal or unequal 110mm bore complete all as specified and directed.

M&L for diameter of outlet 75mm UPVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed

S&F in repairs 125mm size PTMT Grating Doom with waste hole(Min weight 40 grms) , complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing complete all as specified and directed.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs,floor,slabs,landings and similar work not exceeding 200mm thick for rough finished surfaces of concrete all as specified and directed

M&L 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in of floor,finish even and fair complete all as specified.

M&L Double Charged Light shade Vitrefied ceramic tiles 8-10mm thick (Square/Rectangular) polished, area of each tiles upto & including 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

All as item No. 39.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

All as item No. 41.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

All as item No. 43.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L glazed ceramic coloured tiles 450x300x6-7mm in vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed

M&L granite slab 20mm thick of any type work table rubbed and polished in kitchen platforms and like over and including cement screed bed 15mm thick in CM (1:6) bedded and jointed with grey cement slurry and pointed with white cement mortor (1:2) using marble dust with admixture to match with shade of granite including dismantling of old flooring complete all as specified and directed

M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete complete all as specified & directed.

M&L RCC (Nominal Mix) 1:1.5:3 type B-1 (Using 20mm graded stone aggreagate) as in slab, shelves supported on walls beam & coloumns in floor roof including balconies, conopies, deck slabs & shelves complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in bed blocks/hold fast complete all as specified and directed

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to cowkhats complete all as specified and directed

S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.

S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window exceeding 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity not less than 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality and including stainless steel wire cloth 0.45 mm nominal dia of wire and average width of apperture 1.4mm and fixed with steel wire staples and 4.8 mm thick tinted glass including necessary aluminium snap beading with all fitting and fixturre, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm each pane complete all as specified.

S&F 4mm thick frosted glass panes and glazing with oil putty in square nexc 0.5 Sqm each pane complete all as specified.

S&F 100mm Butt hinges, extruded brass, with brass hinge pin, bright polished, complete all as specified and directed

S&F Aluminium anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed

S&F Aluminium anodised, barrel tower bolts of extruded section, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed

S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm long complete all as specified and directed

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed.

M&L for 18/19 mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed.

S&F 30mm width of flaps Continous (Piano) hinges, brass, bright finish or electrogalvanised complete all as specified and as directed.

S&F for 40mm dia cupboard knobs fixed with nut screws and washer of wooden finish brass polished complete all as specified and directed.

S&F 20mm dia brass chromium plated tubular curtain rod with fixing brackets, stops, rollers etc complete all as specified and as directed. Note:-Bracket shall be measured and paid separately under relevent item

S&F Chromium plated Bracket for curtain rod in any size complete all as specified and as directed.

S & F in repair for chromium plated Bib taps for 15 mm bore pipe complete all as specified and directed.

S & F work in repair for ABS body chrome plated shower rose 125mm size with shower arm 240mm long round shape with flange including fixing to steel pipe or union and including fixing to steel pipe or union complete all as specified and directed

S & F in repair for 15mm bore brass chromium plated Angular valve with Wall Flange complete all as specified and directed.

S & F in repair for 15mm bore brass chromium plated 2 Way Angular Valve with Wall Flange complete all as specified and directed.

S & F in repair for chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed.

S & F in repair for Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and colour as directed.

S & F in repair for 15mm bore brass chromium plated Sink Cock Wall Mounted with Flange complete all as specified and directed.

S & F in repair for brass chromium plated Centre Hole Mixer for WHB screwed for 15 mm bore pipe complete all as specified and directed

S & F in repair for 15mm bore brass chromium plated Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and directed.

S & F in repair for 15mm bore brass chromium plated Sink Mixer, Connecting Legs & Wall Flanges complete all as specified and directed.

S&F Stainless steel kitchen sink without drainage board of overall size 460mm x 405mm of bowl size 405mm x 354mm x203mm, made of 1mm thick stainless steel sheet with 32 mm CP waste coupling with brass cap rubber plug, connecting union 32mm bore PVC waste pipe (heavy duty) 90 Cm long, and bedded in cement mortar and fixed on brackets, as in repair complete all specified and directed.

Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white (excluding flushing cistern and flush pipe) including plastic water closet seat, black colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white of size 550 x 400mm excluding taps but including 32mm PTMT waste coupling (excluding 32mm waste pipe) complete all as specified and directed.

S&F in repair vitreous china squatting pan orrissa pattern size 580x440mm white with intregal foot rest including connection to trap, and flusing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified.

S&F in repair PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed.

S&F in repair PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed

S&F triple layer PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet including dismental of old water tank and removing from site. complete all as specified & directed.

S&F triple layer PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet including dismental of old water tank and removing from site. complete all as specified & directed.

S&F Towel ring of size 300mm dia decorative type fixed with walls including necessary fittings etc as in repair complete all as specified and as directed.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60,cm long between flanges as in repair complete all as specified and directed.

S&F in repair stainless steel utencil plate rack (size 24'' x 30'' x 10'') using 0.8mm thick sheet with all fittings accessories complete as directed.

S&F PVC bathroom cabinet (white) of size 500 x 400 x 100 mm (approx) with one single shutter and built in mirror in front of shutter, fixed on walls with wooden plugs and and chromium plated brass screw and cup washe as in repair complete all as specified & directed.

S&F Glass corner shelf of single set with chromium plated brackets and railing including necessary fittings and fixture as in repair complete all as specified and directed.

M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of old surfaces of wood or wood based materials of any descriptionand applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified.

M&L for preparation of new surfaces of Steel and Steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide on steel surfaces complete all as specified.

M&L for preparation of old surfaces of steel or steel based materials of any descriptionand applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified.

M&L one coat of white wash to old plastered surfaces of wall including preparation surface, complete all as specified & directed.

M&L preparing newly plastered wall surfaces and applying 2 coat of oil bound distemper over a coat of primer and applied over avg 1.5mm thick water proof wall care putty including rubbing with emmery paper to make surface even and smooth complete all as specified and directed.

M&L preparing newly plastered ceiling surfaces and applying 2 coat of oil bound distemper over a coat of primer and applied over avg 1.5mm thick water proof wall care putty including rubbing with emmery paper to make surface even and smooth complete all as specified and directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over and including avg 1.5mm thick water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L preparing old decorated surfaces and applying one coat of oil bound distemper complete all as specified and directed.

M&L preparing old decorated ceiling surfaces and applying one coat of oil bound distemper complete all as specified and directed.

M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed.

M&L preparing old decorated surfaces and Finishing walls with one coat of Acrylic Smooth exterior paint of required shade complete all as specified & directed.

S&F Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

Supply and Laying Steel Water Tubing 40mm Bore (dia), Galvanised, ‘Medium Grade’ into the junction between floor and wall as a spout and sealent the joint of pipe and wall, complete as all specified and as directed.

Cleaning of RCC to remove dust and loosely adhering particles complete and any cracks should be cut in V shape and repaired it with polymer modified mortar, Supply and application of Shalicem EWP 200 of STP or equivalent as per list of makes on the prepared surface in ac continuous film on the floor of the sunken area talking the coating over the vertical surface on the floor and covering and on vertical brick surface of wall upto shower level above the final finished floor levels. The coating shall also be continued on the inner surface of the pipe penitration holes and also the vertical upto shower point. Sand sprinkling to be done after application of second coat. Second coat shall be applied @ 1.6Kg/Sqm with an interval of min 8 hrs complete as all specified and as directed. (Note : Elongation after 7 days- 200 10%, Tensile strength after 7 days - 1.2 0.1 MPa, Adhension to concrete .0.7, Mixed density - 1.80 0.3gm/cc)

Supply and applicaction of 1:3 cement:sand mortar, mixed with shaliCrete diluated with water @1:3 and mixed with cement @4% by weight of cement, the polymer modified high quality emlusion, as a covingat the conrners of the floor and the vertical surfaces in the sunken area and between floor and walls in the remaining area complete as all specified and as directed.

Supply and application of all pipe penitration should be sealed with ShaliBond 41, a two part epoxy adhensive and also bore packing should be done with ShaliGrout HS complete as all specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

NUPUR CONSTRUCTION (BID ID -3490851)

RADHA ENTERPRISE (BID ID -3491691)

SEN ELECTRIC WORKS (BID ID -3490769)

ARATI TRADING CO (BID ID -3492588)

BHASKAR SUPPLY AGENCY (BID ID -3490113)

R T BUILDERS (BID ID -3491326)

P N GUPTA AND SONS (BID ID -3490709)