Providing Street Light at existing EB Pole and New Pole with LED light fittings in Ward no.11, North zone

Pole Foundation Making PCC for leveling coarse of size 700mmx700mmx200mm, PCC for leveling coarse 1:4:8 and Making RCC foundation of grade M20 (1 cement : 1.5 sand : 3 stone/brick aggregate) 600mmx600mmx 900 shall be below F.G.L.(Finished Ground Level) and 450mmx450mmx300mm above ground level using steel reinforcement of grade RTS with 50mm clear cover to reinforcement and rings using 8mm dia steel reinforcement @ 190 C/C,using shuttering, along with supply & installation of 2 nos. of 40mm dia HDPE pipe for cable entry and cable exit. 4 no. 'J' type foundation bolts of 650mm Length shall be anchored in the foundation. It includes water curing as required and soil excavation & backfilling. It also includes supply of all material and labour including erection of foundation at Site.

Supply, Erection of OCTAGONAL POST 8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron

Supply and delivery of 70W LED Street Light fitting including cost and conveyance of all materials and all labour charges etc complete with Rate of life of lamps 50000 burning hours, warranty 1 above 5000K year, Lumens/Watt-120, Colour Temperature

Supply and delivery of 45W LED Street Light fitting including cost and conveyance of all materials and all labour charges etc complete with Rate of life of lamps 50000 burning hours, warranty 1 above 5000K year, Lumens/Watt-120, Colour Temperature

Supply and run of 3/20 Single strand copper wire as per the direction of departmental officer

Suuply and fixing of 32mm dia GI Pipe (class B), GI Bend with suitable MS clamp set etc complete as per the direction of departmental officer

Supply and fixing of SP-6A to 32A,10KA MCB 240V 50Hz AC Supply suitable for lighting circuit

Supply and laying of 4 x 10 sq.mm. PVC LTUG armoured cable as per the direction of departmental officer

Supply and Laying of 4x16 Sq.mm PVC armoured LTUG Cable and 40mm HDPE pipe in a trench to be excavated at a depth of 0.75 metre putting 0.15 Metre.Layer of sand and covering the cable completely with bricks and sand refilling the earth to make good

Supply,fixing and providing cable end termination of 4x16 Sq.mm PVC LTUG aluminium armoured Cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD 222)

Supply and fixing of Automatically ON/OFF Sensor Timer Switch as per the direction of departmental officer

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375 mm x 300 mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40Amp 30 MA Double Pole RCD / RCCB with suitable necessary connection

Add :- GST @ 18%