REPAIR TO MARKING ON RUNWAY/ PTT/ SOUTH/ NORHT LOOP/ LINK WINDSOCKS BARRIERS HUTS, PAINTING ON BLAST PENS IN TECHNICAL AREA AT AIR FORCE STATION JAISALMER

M & L for preparation of old painted concrete / bituminous surface and painting lines, dashes,arrows, letters etc on runways,roads, pavements and the like exc. 10 cm wide with road marking paint white ,golden yellow or any other colour as required and the painted surfaces shall stand out boldly and solidly without showing signs of brush marks or surface underneath, if necessary the surfcae shall be repainted until the desired providing steel signal / barricading to Keep off traffic From net paint and. Incident mean. result is obtained with machine complete all as specified and as directed by Engineer-in-Charge.

All as per serial item No 1 above but not exc. 10 cm wide complete all as specified and as directed

M&L for removing old paints on concrete / bituminous surfaces etc by paint remover or burning off by blow lamps and cleaning with scrapers, any width or girth and, preparation of surfaces and painting lines, dashes,arrows, letters etc on runways,roads, pavements and the like exc. 10 cm width or girth and applying with road marking paint with machine white, golden yellow or any other colour as required and the painted surfaces shall stand out boldly and solidly without showing signs of brush marks or surface underneath, if necessary the surface shall be repainted until the desired result is obtained etc complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated bitumen/concrete surfaces etc and applying one coat of white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated wall surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint in different tints in chequerred pattern etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint in different tints in chequerred pattern etc complete all as specified and directed by Engr-in-Charge.

Supply and fix High density waterproof retro Consipicuity reflective tape Red/ yellow / white colour complete all as directed by engineer in charge

S&F in repair location Engineering plastic signage boards / link boardes, of size 786 mm x 600 mm, both side, with writings / signs / arrows with retro - reflective sheetings of approved type and colour, made of hard plastic or perplex sheet 4 to 5mm thiick of approved colour and type, duly framed in with aluminium strip of suitable sizes as required, mounted up on adequate number of legs of minimum height of 3'6" made out of specialised frangible material, weather proof, suitable to withstand extreme cold, extreme heat and high velocity wind pressure etc complete all as specified and as directed of the following sizes : Notes : (a) Quoted rate shall be inclusive of the following :- (i) Excavations for post holes (of min size 400 x 400 x 600 mm) in any type of soil as required filling in and removal of excess soil. (ii) Duly embedding legs of boards into PCC1:3:6 type C1 using 20mm graded stone aggregates upto GL. (b) Writings / alphabets / letters / dashes / arrows, etc shall be of different sizes, types, etc as per requirement of AF Authorities