REPAIR TO CERTAIN BR WORKS IN THE AREA OF DET SIG CMP DET STN HQ CAMPUS AREA STN OFFRS MESS BSO YARD AGE EM YARD AGE BR II YARD FILTRATION PLANT AND GARRISON GROUND UNDER GE MAINT INF SCHOOL MHOW

Amount

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but n.exc 4.0 sqm each complete all as specified.

Taking down shutters of any description n.exc 1 sqm each complete all as specified

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified.

S & F second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.

S&F Mild steel band,straps and small articles such as hold fast , brackets, straps, cleats, etc made with MS flat iron for door/window chowkats conforming to Fe 290 Grade E-165 including applying two coats of red oxide primer complete all as specified

M&L for PCC 1:3:6 type C1 using 20mm graded aggregate as in bed blocks of hold fast etc complete all as specified

M&L fpr preparing surface of wood and such as backs of chowkats etc area exc 0.10 sqm but n.exc 0.50 sqm and treated with tar or coal tar black paint

S&F 35mm thick second class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F second class Hard wood 35 mm thick glazed and skeleton(doors) shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.24 (a) Supplied and fitted to chowkats complete all as specified

S&F 30mm thick factory made, second class hard wood,glazed and skeleton window/ventilator shutters, open repeated and prepared to receive glass,gauze etc (with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F in repairs steel window with side hung shutter including projecting type hinges with steel handle, peg stay complete with glazing bars dovetailed or welded complete all as specified

M&L for peparation of new wood and wood based surfaces of any description not other wise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S & F galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised wire staples,etc complete all as specified

S & F in repairs galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised wire staples,etc complete all as specified.

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm in each pane complete all as specified

S&F 3mm thick figured glass pin head type in square not exceeding 0.5 sqm in each as in pane of ventilator / window shutter complete all as specified

Hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or stone etc and S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified

S&F Mild steel butt hinge of size 100 mm medium weight cold rolled mild steel and fixed

S&F Mild steel butt hinge of size 75 mm medium weight cold rolled mild steel and fixed

S&F aluminum anodized barrel tower bolts of lenth 150 mm extructed section

S&F in repairs 150 mm long Aluminum anodized barrel tower bolts of extructed section

S&F 125 mm long Aluminum anodized barrel tower bolts of extructed section

S&F in repair 125 mm long Aluminum anodized barrel tower bolts of extructed section

S&F aluminum alloy handles fabricated anodised of 150 mm long

S&F in repairs aluminum alloy handles fabricated anodised of 150 mm long

S&F for aluminum alloy handles fabricated anodised of 125 mm long

S&F in repairs aluminum alloy handles fabricated anodised of 125 mm long

S&F 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt sliding bolts of extruded section complete all as specified

M&L for resecuring or easing & adjusting, without taking down, shutters of any description n.exc 1.00 sqm each in same opening complete all as specified

M&L for resecuring or easing & adjusting, without taking down, shutters of any description exc 1.00 sqm but n.exc 2 sqm each in same opening complete all as specified

Dismantling of unframed timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete all as specified

S & F Second class hard wood plain fillets , square rectangular or triangular in section exceeding 6sqcm but not exceeding 13 sqcm ,clean sawn secured with nails or breads complete all as specified

S&F in repair 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work completed all as specified.

S&F in repair 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work completed all as specified.

S&F in repairs 30 mm wide contineous piano hinges mild steel, bright finish or electro-galvanised complete all as specified

S&F in repair 300 mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified

S&F 100 mm hasp & staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified

S&F in repair 25 mm dia mild steel PVC coated drappery curtain rod with brass /nickel chrom polish bracket for each curtain complete all as specified

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions ,arches , pillars etc complete all as specified and as directed.

M & L for Brick work with sub class 'B' modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in any position complete all as specified and as directed.

All as per item No 45 above but except brick. Note : Serviceable bricks obtained from demolition shall be re-used.

M&L brick work with using sub class `B ` modular brick straight or curved on plan exceeding 6.0m mean radius in half brick thick wall built in CM 1:4 complete all as specified

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement complete all as specified

M&L for rendering 10 mm thick in CM 1:6 on fair faces of wall/ concrete surfaces finished even and smooth complete all as specified

M&L for rendering 15 mm thick in CM ( 1:4 ) mixed with WPC on wall / concrete surfaces finished even and smooth without using extra cement complete all as specified Note: WPC shall be measured and paid separately under relevant item.

M&L for 5 mm thick plaster on ceiling in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or other equivalent as approved.

M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of cement primer over a coat of JK/Birla wall care putty complete all as specified

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer complete all as specified

M&L for preparing new surfaces and applying three coats of white wash on ceiling and cornices complete all as specified

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .

M&L for cement concrete 1:2:4 type B1 using 20 mm graded aggregate as in coping, surface channel, bearing course, manhole / drain channel and other similar works etc in including necessary formwork complete all as specified

M&L for 40mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in flooring complete all as specified

M&L for 75 mm thick PCC1:4:8 type D2 using 40mm graded as in foundation, sub-base of floor, etc complete all as specified

M&L for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in floor/ plinth protection finished the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary formwork etc complete all as specified

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified

All as per item No 63 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 an wall complete all as specified

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified

M&L for scratch free vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified

All as per item No 66 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified

M&L for glazed ceramic coloured tiles of size 300x250x7 mm thick on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified

M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified

M&L for chequered cement concrete tiles with grey cement and pigment of size 20cm x 20cm x 25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified

M&L for 18 to 20mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including polishing by using mechanical grinder and moulding edges as in repair complete all as specified

M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 25mm thick sand cushion as in repair complete all as specified

S&F in repair precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerb and edging to road and footh path, etc including chamfered,weathering, throating etc and setting in CM (1:4) complete all as specified

Demolition of cement concrete in any description and in any position along with tarfelt treatment and cement mortar bedding from roof removal rubbish out side MD land complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in leveling course and other works as in roof, kerb, coping, padding etc complete all as specified

M&L for cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 litres but not exceeding 500 litres complete all as specified

All as per item No 76 above but exceeding 500 litres but not exceeding 1000 litres capacity complete all as specified

S&F in repair Rotational moulded Polyethylene water storage tank 500 litres capacity (cylidrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR part I including brass float valve 20mm dia and complete all as specified

All as per item No 78 above but 1000 liters capacity

Taking down and refixing 15mm bore old steel tubing and connection in new or old position complete all as specified

All as per item no 80 above but 20mm bore

S&F in repair steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed.

All as per item no 82 above but 20mm bore complete all as specified and as directed.

S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified

S&F in repair fancy type chromium plated15mm bore bib tap two way cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified

S&F in repair stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified

S&F in repair pillar tap (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified

S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified

S&F in repair fancy type chromium plated 15mm bore two way angle valve cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified

S&F in repair CP mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified

S&F in repairs concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes

S&F in repair 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes

S& F in repair CP toilet paper holder

S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified

M&L in repairs PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified

S&F in repair water jet spray CP 15 mm bore size along with PVC cord to EWC complete all as specified

S&F in repair health faucet with flexible pipe of one metre length including wall hook for EWC complete all as specified

S & F in repairs vitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified

S&F in repairs PVC (SWR) floor trap dia of outlet 75mm bore plain or multi with stainless steel grating including joining to waste pipe with solvent cement joint complete all as specified

S&F in repairs CP grating 100mm dia including fixing the trap with white cement complete all as specified

S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes couplin ,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified

S&F in repairs PVC waste pipe for urinal/wash basin/ sink pipe 32mm bore 65cm long complete all as specified

Dismantling of cast iron / PVC pipes jointed in cement mortar 110 / 75 mm bore all as specified

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid on wall / floor complete all as specified

All as per ser. Item No 107 but except pipe .Note:Serviceable pipe obtained from dismantling shall be used.

S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid on wall / floor complete all as specified

All as per ser. Item No 109 but except pipe .Note:Serviceable pipe obtained from dismantling shall be used.

S&F PVC ( SWR) bends any radius 110mm bore

S&F PVC ( SWR) bends any radius 75mm bore

S&F 110mm PVC ( SWR) junction single (single T/Y) equal or unequal

S&F 75mm PVC ( SWR) junction single (single T/Y) equal or unequal

S&F 75mm bore cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors including dismantling old pipe complete all as specified

All as per item No 116 above but for 100mm bore

S&F in repairs brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc complete all as specified

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction and dismandling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F in repair mild steel work as in tubular trusses, purlins, rafter, tubular column, where connected common rafter and running rails fixed with angle cleat or other connection plates including specially shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-1161-1979 grade ST-240 complete all as specified

S&F in repairs MS framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and fixing and similar work confirming to Fe 290 Gde E-165 complete all as specified

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth as in stone concrete block or slab wall complete all as specified

M&L for preparation of newly steel surface of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.

M&L for preparation of old decorated plastered surface or un plastered surface of wall including cornice and pillars of and applying one coat of white wash complete all as specified

M&L for complete removal of exisiting treatment on walls including preparation and applying two coats of white wash complete all as specified

M&L for complete removal of exisiting treatment of any description from ceiling including preparation and applying two coats of white wash on the ceiling complete all as specified

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed .

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying two coats of oil emulsion distemper complete all as specified

M&L for complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrapper or any other methoad as approved by Engineer-in-Charge and applying two coat of oil emulsion distemper over a coat of primer including applying one coat of JK / BIRLA white wall care putty 1-2 mm thick complete all as specified

M&L for preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified

M&L for preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified

M&L for complete removal of existing treatment from steel surface over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified

M&L for preparation of old decorated surfaces of wall including cornices and pillar surfaces and applying one coat of cement base paint on wall complete all as specified

M&L for complete removal of existing treatment (any number of layers) on walls scrapping with steel scrapper or any other method as approved by EIC including filling the cavity ,priming plaster and other old disturbed surface with alkali resistant priming paint and applying two coats of cement base paint all as specified

M&L for preparation of old decorated surfaces of wall including brooming , scraping down,smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured over a coat of oil base primer over a coat of white cement based putty (wherever required) complete all as specified

Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aqua flex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness including demolition of existing water proofing traetment complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufacturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3 mm thick APP polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @0.15 Kg/Sqm shall be applied over the APP membrane surface. NOTE:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min) (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min) (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min) (iv) 4 mm thick glass superior quality.(Min) (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos.(Min) (vii) Sliding rollers per shutter - 02 Nos.(Min) (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

S&F aluminium coloured power coated door shutters and frame , aluminium section weighing minimum 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition including necessary cutting / moulding and chamferring of edges including taking down of exiting almuminium shutter with frame of any description complete all as specified and directed. .

S&F in repair aluminium (extructed section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter and fixed complete all as specified

ss construction

m/s ajay chandil

M/s Narendra kumar Agrawal

PARIDHI CONSTRUCTION

J B CONSTRUCTION AND DEVLOPERS