PROVN OF BATHING BLOCK OF SIZE 10 FEET X 25 FEET HAVING FIVE BATHING POINTS BEHIND BLDG NO T-282 AT FD HOSP UNDER AGE (I) BHALRA

Amount

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in any type soil, complete all as specified & directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth in any type of soil and getting out, complete all as specified and as directed.

Material and Labour for PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified & directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified.

Material and Labour for Sand filling under floors including watering, ramming and rolling, complete all as specified.

Material and Labour for Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified.

Material and Labour for Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1 :4 in half brick wall, complete all as specified.

Material and Labour for TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified& directed.

Material and labour for mild steel TMT bars 5mm dia and over upto 10mm cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and Labour for use & waste of form work to sides of concrete foundation, footings, bases of columns, rafts and raft beamsand similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified & directed.

Material and Labour for use & waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc alo splays between floors and beams for fair finished surfaces of concrete, complete all as specified & directed.

Material and Labour for use & waste of form work to sides of pillars, posts, structs, columns etc. for rough finished surfaces of concrete, complete all as specified & directed.

Material and Labour for RCC M-25, design mix, using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., complete all as specified & directed.

Material and Labour for RCC M-25, design mix, using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified.

Material and labour for RCC M-25, design mix, using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified & directed.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cementbut using integral water proofing compound as per manufacturer's instructions, complete all as specified.

Material and Labour for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour for preparation of new plastered surface of wall and applying two coats of white wash, complete all as specified and directed.

Material & Labour or preparing new surfaces (plastered or unplastered) of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified and as directed.

Material and labour for preparation of new or previously untreated steel and iron surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified.

Material and labour for 75 mm thick plain cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed.

Material and labour for rolled Mild steel framed work as in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to Fe-410(Gde E-250), complete all as specified & directed.

Material and labour for rolled mild steel work in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410(Gde E-250), complete all as specified & directed.

Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified.

Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified.

Material and labour for PCC 1:3:6, type C-2 using 40mm graded crushed stone aggregate as in foundations, filling, mass concrete and sub base of floor, complete all as specified & directed.

Material and labour for stone walling of random rubble with best quality locally available harder stone such as granite, trap or basalt, brought upto courses, well bonded, bedded, solidly hearted and built in cement mortar 1:6, complete all as specified & directed.

Material and labour for PCC 1:3:6, type C-1 using 20mm graded stone aggregate as in precast bond stones, set in cement mortar 1:6, including all necessary form work, complete all as specified & directed.

Extra over stone walling of granite, trap or basalt stone for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 40mm, complete all as specified & directed.

Material and labour for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4, complete all as specified.

Material and labour for PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Material and labour for Hand packing (any thickness) using broken stone or boulders at back of walls over arches etc., and raising (or lowering) to the required level, complete all as specified.

Material and labour for Hard core of gauge not exc 63mm using broken stone or boulders, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified.

Material & labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of floor, complete all as specified and directed.

Material and Labour for non skid ceramic coloured tiles 7 to 8mm thick (Square/Rectangular) area exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry over and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

Material and Labour for Glazed ceramic coloured tiles in skirting/dado 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in cement mortar 1:4 as backing coat rough finished surface complete all as specified and directed.

Material and Labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15mm screed layer in cement mortar 1:4 and rounding/bull nose to expose edge of granite, complete all as specified & directed.

Supply and fixing of Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.

Supply and fixing of 3 mm thick sheet glass, ordinary quality & glazing with oil putty/wooden beading/rubber packing around the glass in square n exc 0.5 sq.m in each pane, complete all as specified and as directed.

Supplying and fixing of factory made Solid PVC Door Frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S.Square tube, suppling & fixing in opening as per specification complete all as specified and as directed.

Supplying and fixing of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and as directed.

Supply and fixing of Butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, complete all as specified.

Supply and fixing of Aluminium anodised, barrel tower bolts of extruded section of size 150mm ISI marked and fixed, complete all as specified and directed.

Supply and fixing of Extruded aluminium alloy handles, fabricated type, anodised of size 150mm and fixed, complete all as specified and directed.

Supply and fixing of Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

Supply and fixing of Vitreous china Wash hand basin oval shape counter top, white, size 550x400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends, complete all as specified and directed.

Supply and fixing of centre hole CP brass basin mixer without popup waste system with 450mm long braided hoses cast copper alloy for iron pipe 15m bore, screwed for iron pipe and fixed, complete all as specified and directed.

Supply and fixing of PVC connection 15mm size with brass nuts on both ends of length 450mm, complete all as specified.

Supply and fixing of Towel rail aluminium anodised, 20mm dia, D type, 60cm long between flanges, complete all as specified.

Supply and fixing of 15mm bore Bib taps (ISI marked) of cast copper alloy chromium plated, fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fixing of Angle valve/Stop valve of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified and directed.

Supply and fixing of stop valves, 15mm bore, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specifed.

Supply and fixing of shower rose brass chromium plated 200x200mm size with flexible brass arm 450-550mm long, complete all as specified and directed.

Supply and fixing of soap dish cantabile-clea (material SS finish, glossy) fixed to plugs with chromium plated brass screws and wooden/plastic cleats, complete all as specified.

Supply and fixing of PVC(SWR) pipes 110mm dia bore, single socketd , in any length with rubber ring joints , in any length fixed to walls or laid in trenches or in floors having strength not less then 6kg/cm2 with and including clamps complete all as specified and directed.

Supply and fixing of PVC (SWR) bend any radius 110mm dia bore complete all as specified and directed.

Supply and fixing of PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement, complete all as specified.

Supply and fixing of PVC(SWR) pipes 75mm dia bore, single socketd , in any length with rubber ring joints , in any length fixed to walls or laid in trenches or in floors having strength not less then 6kg/cm2 with and including clamps complete all as specified and directed.

Supply and fixing of PVC (SWR) bend any radius 75mm dia bore complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.

Supply and fixing of Rolled mild steel work in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary length i.e. within 20mm of the length indicated), conforming to Fe-410-W (Gde E-250) quality A, complete all as specified & directed.

Supply and fixing of Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and PTMT ball valve 20mm (Minimum weight 210gms), high pressure with polyethelyne float and fly nuts, complete all as specified and directed.

Supply and fixing of 20mm dia GI steel water tubing, medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors, complete all as specified.

Supply and fixing of Stop valves, cast copper alloy, 20mm bore, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specifed.

Supply and fixing of 15mm dia GI steel water tubing, medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors, complete all as specified.

Materials and Labour point wiring with multistranded copper conductor of size 1.5 sqmm PVC insulated unsheathed FRLS cable in and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.5 mm thick with accessories etc, including 1.50 sqmm copper earth wire (green colour) FRLS cable as earth continuity conductor connected to main earthing and common earth terminal for one ligh point or fan point or bell point controlled by one No, one way switch using cable of different insulation coloour for colour coding including 16 gauge mild steel sunken box/PVC box, 3mm thick laminated sheet cover for mounting fittings such as switches, sockets, fan requlators etc including cutting chases and making good to distrubed surfaces of wall/ floor, complete all as specified and as directed.

All as per the description of Serial Item No 69 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and as directed.

All as per the description of Serial Item No 69 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.50 Sqm with 2.5 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.

Supply & fixing Switch piano flush type, single pole, 6 Amp, one way, AC 230 volts etc complete, all as specified and directed.

Supply & fixing Socket outlet, 2 in 1, 3 pin, 6 Amp, flush type, AC 230 volts etc complete all as specified and directed.

Supply & fixing Socket outlet 2 in 1, 5 pin, 5 & 15Amp, flush type, AC 230 volts etc complete, all as specified and directed.

Supply & fixing Switch piano flush type, single pole, 15 Amp, one way, AC 230 volts etc complete, all as specified and directed.

Supply and fixing of 20W surface/wall mounted box type batten LED luminaire, extruded polycarbonate housing with PC diffuser and integrated electronic driver with high efficiency long life, CRI=80(Minimum), PF>0.90, luminous efficacy > 120 lumens/Watt operating voltage 140V-240V, colour temperature (CCT) > 5700 + 300K, THD < 10% complete with all accessories internally prewired and including connection up with flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and as directed.

Supply and fixing Energy saving, surface mounted bulk head luminaire 10W made of pressure die cast aluminium housing & polycarbonate diffuser with IP 65 protection in house driver and luminous efficacy > 100 lumens/Watt, PF > 0.90 with colour temperature (CCT) > 5700 + 300K, complete including connecting up with suitable size flexible copper conductor cable complete all as specified and directed.

Supply and fixing of box type 10 Watt LED 2 feet length as mirror light, extruded polycarbonate housing with PC diffuser and integrated electronic driver with high efficiency long life, CRI=80(Minimum), PF>0.90, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, colour temperature (CCT) > 5700 + 300K, THD < 10% complete with all accessories internally prewired and including connection up with flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase, voltage 230V, 50 Hz, RPM 1400, Copper winding of size 300mm sweep with, blades, and frame and louvers, complete all as specified & directed.

Supply and fixing Ceiling rose, 3 phase/PVC/Polycarbonate, isolated body and all as specified and directed.

Supply and fixing of MCB DB 4 - way, single door, 240 volts for Sheet Steel, Phosphatised, Powder Painted MCB DBs with Bus Bar,Neutral Link, Earth Bar and Din Rail (In accordance with IS 13032, IS 8623, IEC/BSEN 60439-3), complete all specified and directed.

Supply and fixing of MCB SP 6-32 Amps 'C' series 240V 50Hz 10 KA suitable for lighting and other domestic loads complete all as specified and directed.

Supply and fixing of MCB SPN 40 to 63 Amps 'C' series 240V 50Hz 10 KA suitable for lighting and other domestic loads complete all as specified and directed.

Supply anf fixing of Storage water heater (Geyser), vertical type, of 25 ltr capacity of inner tank, outer tank, syphon assembly, thermostat heating element, safety valve etc complete all as per manufacturer design and specifications including making of all fixing arrangements complete having BEE Five Star Rating including grouting of nuts and bolts and PVC connection for connecting inlet and outlet connection, specified and directed.

Supply and fixing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminiuum stranded conductor served with an inner sheating of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm suspention wire one twin core 16 sqmm solid conductor all as specified and directed.

M S BANSI LAL CONSTRUCTION CO (BID ID -3264715)