Providing wall panelling, wooden flooring and furnitures to the SCADA room at the newly constructed Corporate office Gopanakoppa Hubballi

Providing wall panelling, wooden flooring and furnitures to the SCADA room at the newly constructed Corporate office Gopanakoppa Hubballi

code01 Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for F... 160.00 Sqm

code02 Providing and fixing partition frame work consisting of 50mm x 50mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the bottom and ceiling, the partition shall be sinked on both sides... 25.00 Sqm

code03 Providing and laying of Modular wooden polished flooring of 12mm thick, high destiny timber of approved colour and design with end trims, transition, profiles, beading, 15mm thick felt, and 20micron p... 100.00 Sqm

code04 Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over a... 25.00 Sqm

code05 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of appro... 300.00 Kgs

code06 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufac... 150.00 Sqm

code07 Supplying ......TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start ru... 2.00 Nos

code08 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. 2.00 Nos

code09 Extra for Fabrication supply and fixing of Stand fabricated using slotted angle L angle of size 6mmx 50mm for mounting out door/indoor AC unit/ Batteries 2.00 Nos

code10 Supplying and installation of insulated refrigerant copper tubing of 5/8 and 3/8 with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit ... 20.00 Mtr

code11 Supplying and fixing electro mechanical/Pneumatic time switches. 2.00 Nos

code12 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450 mm) 2.00 Nos