REPAIR / REPLACEMENT / MAINT OF CEILING FAN / EXHAUST FAN / GEYSER / SUB MAIN WIRING OF VARIOUS SIZES / SHEET METAL BOXES / SPN MCB DBs / SERVIC CONNECTION / BUILDING SECURITY LIGHT AND CERTAIN E/M WORK AT 39 WING AIR FORCE STATION UDHAMPUR

Amount

Taking out burnt/damaged copper winding wire from 1200 mm Sweep ceiling fan motor of any make and M&L for rewinding of ceiling fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing capacitor, ball bearing, bush,locking pin and certain minor repair etc assembling and testing and refixing of same places complete all as specified.

Taking out burnt/damaged copper winding wire from 1400mm Sweep ceiling fan motor of any make and M&L for rewinding of ceiling fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing capacitor, ball bearing, bush,locking pin and certain minor repair etc assembling and testing and refixing of same places complete all as specified.

Taking out burnt/damaged copper winding from Wall mounted fan 400mm motor of any make and M&L for rewinding of wall mounted fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing, including painting capacitor ball bearing bush,locking pin and certain minor repair etc. each assembling and testingand refixing of same places complete all as specified.

Taking out burnt/damaged copper winding from Wall mounted fan 600mm motor of any make and M&L for rewinding of wall mounted fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing, capacitor ball bearing bush,locking pin and certain minor repair etc. each assembling and testing and refixing of same places complete all as specified.

Taking out burnt/damaged copper winding from pedistal fan any size motor of any make and M&L for rewinding of fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing, assembling and testing and refixing of same places complete all as specified.

Taking out burnt/damaged copper winding from exhaust fan 200 to300 mm motor of any make and M&L for rewinding of fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing, assembling and testing including taking down and refixing using etc of same places complete all as specified. all as specified.

Taking out burnt/damaged wire from exhaust fan motor of 400 to 450 and M&L for rewinding of with super enameled copper winding wire of same size, gauge & weight including packing insulating material, soldering, varnishing, including painting capacitor ball bearing bush and certain minor repair etc assembling and testing including taking down & refixing using fastner etc. complete all as specified varnishing & insulating complete and refixing of same places complete all as specified and directed.

Taking down dismaintilling UNSV/Rusted fatal/damaged Exhaust Fan MS / iron body of any size and any make and repairing the following items of existing sizes.

Exhaust Fan motor suitable for 400 to 450 mm

Exhaust fan frame with nut bolts etc size 400to 450 mm sweep

Exhaust fan Louver iron shutter for size 400 to 450mm sweep along with fixing arrangement

Exhaust Fan motor suitable for 250 to 300 mm

Exhaust fan frame with nut bolts etc size 200to 300 mm sweep

Exhaust fan Louver iron shutter for size 250 to 300mm sweep along with fixing arrangement

Taking down dismaintilling UNSV/Rusted fatal/damaged Ceiling Fan from of any size and any make and repairing the following items of existing sizes.

Ceiling Fan motor suitable for 1200 mm

Ceiling fan winds(sweep)1200mm set etc size

Ceiling fan conopy set of two suitable for existing fan.

Ceiling fan down rod suitable 1200mm ceiling fan.

Ceiling fan fixing arrangement/hook with nuts bolts /locking pin system

Supply and fix in repairs Standard ball bearing for 1200/1400 mm ceiling fan suitable for diffrent makes of fans of aproved quality including necessary

S&F in repairs down rod 30 cms long made out of heavy grade M.S pipe with necessary threading at both ends, holes as required matching with existing & painting for size of ceiling fan 1200mm/1400 mm as all directed by Engineer-in-Charge.

S&F in repairs down rod 60 cms long made out of heavy grade M.S pipe with necessary threading at both ends, holes as required matching with existing & painting for size of ceiling fan 1200mm/1400 mm as all directed by Engineer-in-Charge.

S&F in repair of rubber bushes and real synthetic rubber with 14.5 mm hole suitable for fan hooks for hanging of ceiling fans all directed by Engineer-in-Charge.

S&F of fasteners size of nut less than25 mm clamp with complete set of appropriate size for hanging of geyser/ E/fan / ceiling fan all directed by Engineer-in-Charge.

Supply and fixing of Surface mounting clamps for PVC pipe clearince saddle clamps25/40/50 /60/75 mm complete all as specified and as directed.

Supply and fixing of 15 Amps switch socket combination including Box complete all as specifed and as directd

S&F in replacement condenser/capacitor suitable for 230 volts single phase for ceiling fan/exhaust fan/cabin fan/pedestal fan of capacity 2.5 mfd ISI mark including necessary connection complete all as specified.

S&F in replacement condenser/capacitor suitable for 230 volts single phase for ceiling fan/exhaust fan/cabin fan/pedestal fan of capacity 3.15 mfd ISI mark including necessary connection complete all as specified.

S&F in replacement condenser/capacitor suitable for 230 volts single phase for ceiling fan/exhaust fan/cabin fan/pedestal fan of capacity 4 mfd ISI mark including necessary connection complete all as specified.

Painting one coat of synthetic enameled paint by spraying to ceiling fans/E/fan of any type in MES store yard including preparation to old painted surfaces by filling cavities etc and overhauling by providing correct grade of lubricant oil/wheel bearing grease complete including taking down and refixing of same places making/writing of MES No all as directed by Engineer-in-charge.

Supply and replacement exhaust fan frame cover made out of M.S sheet of any make and size as per existing exhaust fan with suitable size of nuts, bolts & washers complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of PVC Exhaust Fan 150 mm sweep with lovour complete all as specified and as directed

M&L in repair of cutting of existing wall and fixing of Exaust fan total making good plaster and white wash and suitable size of 04 Number faishner and fixing of any type exhaust fan complete all as specified and as directed .

Supply and fixing in repair PVC Exhaust Fan 200 mm with lovour complete all as specified and as directed.

Supply and fixing in repair PVC Exhaust Fan 250 mm Rust free Body ,copper motor with lovour complete all as specified and as directed.

Supply and fixing in repair of PVC Fan 300 mm with lovour complete all as specified and as directed.

Taking down geysers of any type and any capacity due to rusting of bolts/seepage of wall and re-installation at any location including S&F in repairs of heavy duty pin type fastener 4” long and making necessary inlet/outlet electric & water supply connections from existing source to geyser complete all as specified and as directed.

S&F in repairs heating element, cup (round) type, 1.5 KW 230 volts, ISI marked suitable for 25/50 ltrs geysers of any make complete all as specified and as directed.

all as per above serial item No.27 but here-in-before but in tikona type

S&F in repairs heating element, cup (round) type, 2.00 KW 230 volts, ISI marked suitable for 25/50 ltrs geysers of any make complete all as specified and as directed.

all as per above serial item No.29 but here-in-before but in tikona type

S&F in repairs 7 " thermostat switch for geysers of 25/50 ltrs capacity (ISI marked) complete all as specified and as directed.

S&F in repairs 11" thermostat switch for geysers of 25/50 ltrs capacity (ISI marked) complete all as specified and as directed.

S&F in repairs inner stainless-steel inner tank of 20 gauge sheet rated pressure not less than 8kg/sqcm suitable for 25 ltrs capacity geysers complete all as specified and as directed.

S&F in repairs inner stainless-steel inner tank of 20 gauge sheet rated pressure not less than 8kg/sqcm suitable for 50 ltrs capacity geysers complete all as specified and as directed.

Taking down UNSV/ Rushed / fatal hot water geyser capacity 25 Ltrs / 50 Ltrs from OTM / Mess / Accn etc of any make and repairing / Installation at same location by replacement of following items-

Outer body of geyser Cap-50 Ltrs along with PV foam for heat retaining

Outer body of geyser Cap-25 Ltrs along with PV foam for heat retaining

Steel Inner tank of geyser cap-50 Ltrs, pressure ratintg 0.8 bar

Steel Inner tank of gyser cap-25 Ltrs, pressure ratintg 0.8 bar

Base plate with indicator suitable for cap-50 Ltrs

Base plate with indiactor suitable for Cap-25 Ltrs

Geyser assy suitable for Cap-50 Ltrs

Geyser assy suitable for Cap-25 Ltrs

Element suitable for Cap-50 Ltrs Geyser & 5 star rating

Element suitable for Cap-25 Ltrs Geyser & 5 star rating

Thrmostate suitable for 50 Ltrs Geyser

Thrmostate suitable for 25 Ltrs Geyser

S&F in repair base 09/06 Nuts assembly, compatible to existing geyser, with inlet and thermostat pipe with drain plug inclusive of clamps for holding the element with nuts, bolts and gasket complete all as specified and as directed.

S&F in repairs indicator lamp for geyser of any type colour green & red complete all as specified and as directed. Make : Usha / Bajaj/ Crompton

S&F in repairs plug top 3 pin 15 Amp ISI marked complete all as specified and as directed. Make Anchor / Havells / Bajaj .

S&F in repairs bottom cover of MS sheet 20 gauge suitable for 25 /50 ltrs capacity geysers and providing a coat of red oxide to inner surface and applying one coat of synthetic enamel paint by spray painting to outer surface complete all as specified and as directed.

S&F in repairs brass non-return valve 15 mm bore ISI marked screwed both ends and connecting to iron pipe in repairs complete all as specified and as directed.

S&F in repairs pressure safety value confirming to relevant IS with washer suitable for 15 mm GI pipe suitable for 25/50 ltrs geysers complete all as specified and as directed.

Supply and fixing Plug socket board with metal socket and plug DP 20 Amp (I Phase ,1 Neutral and earth ) complete including taking down all as specified and as directed. (Make Legrand/ indoasian/ havells)

GI tubing medium grade of size 25mm bore ISI marked galvanized with all fittings such as bends, elbows, tees, check nuts, unions nipples etc for cold water pipe line complete all as specified and as directed including taking down old.

Description all as per item No 43 here-in-before but 20mm bore.

Description all as per item No 43 here-in-before but 15mm bore.

S&F in repairs of Heavy Stainless steel geyser connection pipe as per existing 304 Grade Graiding for extra connection including taking down complete all as specified and as directed. (size 18" mm)

S&F in repairs of Heavey duty PVC pipe( 36" inch for geyser connection pipe as per existing for extra connection inclluding taking down complete all as specified and as directed.

Supply and fixing in repair of Plug type bib taps, cast iron, screwed for iron pipe and fixed of size 15/20 mm bore dia

Supply and fix in repair of Stop valves/angle vale 15mm , cast copper alloy, screwed down, high pressure,with crutch or butterfly handle, screwed both ends for ironpipe or for unions and fixed

M&L in repair of single pole and earth encloser with three pin and earth plug plus neutral with socket 32/40 Amps 240Volts complete indrustial type with Tripple pole MCB complete all as specified and directed IP-30 protation

Taking down carefully aluminum/copper point wiring (light/ fan/socket or power) complete ,including fixture and fittings such as switches,ceiling roses,pendants ,reguators socket,light fitting etc removing materials to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions separtely) and making good disturbed surfaces of walls,floors etc.

M&L for point wiring complete with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring concealed in wall/false ceiling with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 1.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/Polycab ]

One light/Fan/Exhaust fan point controlled by one switch

One light point controlled by two way switches

One bell/buzzer point controlled by one push button on the same board with other switches or independent

One 5 pin 5 Amp switch socket out let point on the same board with other switches

One 5 pin 5 Amp switch socket out let point on an independent board

M&L for point wiring complete with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in existing conduit with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 1.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

One light/Fan/Exhaust fan point controlled by one switch

One light point controlled by two way switches

One bell/buzzer point controlled by one push button on the same board with other switches or independent

One 5 pin 5 Amp switch socket out let point on the same board with other switches

One 5 pin 5 Amp switch socket out let point on an independent board

M&L for point wiring complete with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in Surface conduit with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 1.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

One light/Fan/Exhaust fan point controlled by one switch

One light point controlled by two way switches

One bell/buzzer point controlled by one push button on the same board with other switches or independent

One 5 pin 5 Amp switch socket out let point on the same board with other switches

One 5 pin 5 Amp switch socket out let point on an independent board

M&L for point wiring complete with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring concealed in wall/false ceiling with pressed steel concealed Sunken boxes suitable for Modular Switch & Socket not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 1.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI ]

One light/Fan/Exhaust fan point controlled by one switch

One light point controlled by two way switches

One bell/buzzer point controlled by one push button on the same board with other switches or independent

One 5 pin 5 Amp switch socket out let point on the same board with other switches

One 5 pin 5 Amp switch socket out let point on an independent board

M&L for point wiring complete with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in existing conduit with pressed steel concealed Sunken boxes suitable for Modular Switch & Socket not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 1.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

One light/Fan/Exhaust fan point controlled by one switch

One light point controlled by two way switches

One bell/buzzer point controlled by one push button on the same board with other switches or independent

One 5 pin 5 Amp switch socket out let point on the same board with other switches

One 5 pin 5 Amp switch socket out let point on an independent board

M&L for point wiring complete with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in Surface conduit with pressed steel concealed Sunken boxes suitable for Modular Switch & Socket not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 1.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

One light/Fan/Exhaust fan point controlled by one switch

One light point controlled by two way switches

One bell/buzzer point controlled by one push button on the same board with other switches or independent

One 5 pin 5 Amp switch socket out let point on the same board with other switches

One 5 pin 5 Amp switch socket out let point on an independent board

M&L for point wiring complete with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in concealed in wall/false ceiling with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 2.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

M&L for point wiring complete with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in Existing Conduit with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 2.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

M&L for point wiring complete with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in Surface Conduit with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 2.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

M&L for point wiring complete with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring concealed in wall/false ceiling with pressed steel concealed Sunken boxes suitable for Modular Switch & Socket not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 2.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

M&L for point wiring complete with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in Existing Conduit with pressed steel concealed Sunken boxes suitable for Modular Switch & Socket not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 2.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

S&F Bell switch AC, 230 Volt single pole

S&F switch piano, flush type, 5 amps single pole, one way

S&F switch piano, flush type, 16 amps single pole, one way

S&F socket, flush type, 5 pin, 16 amp multi purpose.

S&F socket 2 in 1, 3 pin, 5 and 5 Amps flush type

S&F switch piano Two flush type, 05 amps single pole, one way

S&F modular switch , 6 Amp singe pole one way.

S&F modular socket 2/3 pin, 6 amp multipurpose.

S&F modular switch , 16 Amp, single pole one way.

S&F modular socket multipurpose 16 amps.

S&F modular switch , 6 Amp Bell Push singe pole one way.

S&F modular Two Way switch , 6 Amp singe pole one way.

Note;-( For Ser. Item No 99-104) The rate will be inclusuve of suitable cover,and module frame for group of switches,sockets etc all as required as per site requirement.

Supply and fix Modular fan regulator complete all as specified and as directed.

S&F in repair ceiling rose 3 phase /PVC/polycarbonate,isolated body .

M&L in repair Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface concealed PVC conduit, heavey duty and connected to main board and making good disturbed surface complete all as specified and as directed. Make of conductor : Havells/polycab/KEI Note: Two runs each of 4.00 sqmm main cable and one RM of 4.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

M&L in repair Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface existing conduit, heavey duty and connected to main board and making good disturbed surface complete all as specified and as directed. Make of conductor : Havells/polycab/KEI Note: Two runs each of 6.00 sqmm main cable and one RM of 6 .00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

M&L Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid SurfacePVC conduit ISI Marked , heavey duty and connected to main board and making good disturbed surface complete all as specified and as directed. Make of conductor : Havells/polycab/KEI Note: Two runs each of 10.00 sqmm cable and one RM of10.00sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

S&F in in repair Sheet metal enclosures for DBs SPN 2 way flush mounted including accessories therein and disposing off complete all as specified and directed. Make:Legrand/HAVELLS / indoasian

M&L in repair Sheet metal enclosures for DBs SPN 4 way flush mounted including accessories therein and disposing off complete all as specified and directed. Make:Legrand/HAVELLS / indoasian

M&L in repair of sheet metal enclosures double door for DBs SPN 12 way 240 Volt with 200 Amps rated Busbar including accessories therein and disposing off complete all as specified and directed.(Make: Indoasian or its equivalent/legrand /CG )

S&F in in repair Sheet metal enclosures for DBs SPN 8 way with 200Amps rated busbar including accessories therein and disposing off complete all as specified and directed. Make:Legrand/HAVELLS / indoasian

S&F in in repair of MCB SPN 63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. .(Make: Indoasian or its equivalent/legrand /CG )

S&F in in repair of MCB SPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. Make of Legrand or equavalent to HAVELLS / SIEMENS/indoasian

S&F in in repair of MCB SP 6-32 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. Make: of Legrand or equavalent to HAVELLS / SIEMENS/indoasian

S&F in in repair of MCB TPN 40-63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed.(Make: Indoasian or its equivalent/legrand /CG )

S&F in repairs Recess mounting type LED indoor luminaire powder coated, CRCA or powder coated aluminium panel 2' x 2' (Appx) system wattage 36 watt to 42 watt (cool white), minimum system lumen efficacy not less than 100 lum, CRI not less than80, colour temperature not less than 6000 K, power factor not less than 0.95, LED driver IP protection IP 20, powder coated housing with ashthetic bottom frame, suitable for any type of ceiling system including connection with PVC insulated copper conductor complete all as specified. (Make Havells/Bajaj/CG or Equivalent.)

Supply and fixing in repars of steped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. As per existing make requied complete all as specified and as directed.

S&F in repairs indoor decorative 20 Watt LED Light fitting four feet PVC batten housing LED batten type luminaire high efficiency electronic driver, (lumen output not less than 2000 lumen), power factor more than 0.9 colour temperature not less than 6000K, LED driver with PVC insulated copper conductor complete all as specified..

M&L in repair of Lamp holder, insulated body, cord grip pattern SP 230 volt, including taking down complete all as specified and as directed.

Supply and fixing in repar of LED light fitting mirror type with high out put diffuser 09/10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge Make Havells/philips/bajaj/wipro

Supply and fix in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting complete all as specified and as directed.

Supply and fixing in repair of LED Building light of 35 watt, IP66 power coated pressure die cast aluminium compact high power LED buildimg light with heat resistant toughened glass complete with GI pipe bracket light grade 1.2m long of suitable bore fixed on wall with GI clamps, nuts and bolts of suitable size ,Luminan efficancy 100 lm/watt along with surge protator all as specified and as directed. .

Supply and fix in repair of Street light bracket made out of 32/40 mm dia GI light grade tubing not less than .75 Mtr long bend to shape including pole clamps/fastners clips nails made out flat iron and nuts, bolts and washers etc complete all as specified and directed.

Supply and fixing in repair of LED rod 20 watt NU Batten 2000 lumeen in a compact batten (61.8 cm) decorative LED Fixture with curved diffuser and extunded polycarbonate channel envernoment friendly energy efficent complete all as specified and directed by Engr-in-Charge Make : CG ,Havells/philips/bajaj/wipro/surya

Supply and fixing in repair of flourocent 4 pin rod 36 watt lumeen 29002G11 complete all as specified and directed by Engr-in-Charge Make : CG ,Havells/philips/bajaj/wipro

M&L in repair of VTPN Vertical three phase distribution board, VTPN, 4 way 440 volts having IP-54 isolated busbar assembly IK 09 Mechnical impact strength door earthing protection, double door with provision for fixing of MCCBs as incomer up to 125 Amps and MCBs as outgoing complete all as specified and as directed .(Make: Indoasian or its equivalent/legrand /CG )

Supply and fix in repairs of MCCB 4P 63 Amps /415Volts ,having breaking capacity with complete accessories as per existing suitable size complete all as specified and as directed

Supply and fix in repairs of MCCB 4P 100 Amps /415Volts ,having breaking capacity with Complete accessories as per existing suitable size complete all as specified and as directed

Supply laying, connecting and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 10 sqmm 4.0 core laind in trenches or passing through pips/ ducts complete all as specified and directed by Engineer in charge

Supply laying, connecting and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 25 sqmm 3.5 core laind in trenches or passing through pips/ ducts complete all as specified and directed by Engineer in charge

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cable and foundation of poles, stays and getting out in any type of soil, all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layer in any type of soil complete all as specified and as directed by Engineer-in-Charge.

Removing surplus excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and as directed by Engineer-in-Charge.

M & L for Sand cushioning to underground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. by Engineer-in-Charge. Note: Punned thickness of sand shall be measured.

M&LCommon burnt sub class ‘B’ brick laid flat in trenches over and across the length of cable with length of brick perpendicular to the direction of cable adjacent/abutting each other complete all as specified and directed for cable protection.

shivom builders

M/S M P Construction Co

PAWAN KUMAR GOVT. CONTRACTORS

ANIKET TRADERS

CITY TOP ELECTRICAL WORKS