REPAIR/REPLACEMENT TO VARIOUS TYPES OF ELECTRIC MOTOR AND PUMPING SETS, SUBMERSIBLE PUMPS AT WATER SUPPLY INSTALLATIONS WITH CONNECTED AND MISCELLANIOUS WORKS UNDER GE UTILITY BATHINDA AT BATHINDA MIL STN

Amount

All as per srl item No. 1.00 here-in-before but electric induction motor of capacity 15 HP to 50 HP complete all as specified and as directed by Engineer-in-charge.

All as per srl item No. 1.00 here-in-before but electric induction motor of capacity upto 12.5 HP complete all as specified and as directed by Engineer-in-charge

All as per srl item No. 4.00 here-in-before but centrifugal pumping set of capacity 15 HP to 50 HP complete all as specified and as directed by Engineer-in-charge.

All as per srl item No. 4.00 here-in-before but centrifugal pumping set of capacity 1 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge.

All as per srl item No. 8.00 here-in-before but bore well submersible pumping set of capacity 15 HP to 30 HP complete all as specified and as directed by Engineer-in-Charge.

Supply only ball bearing No. 6205 Make :- SKF/NBC.

Supply only ball bearing No. 6206 Make :- SKF/NBC.

Supply only ball bearing No. 6306 Make :- SKF/NBC.

Supply only ball bearing No. 6307 Make :- SKF/NBC.

Supply only ball bearing No. 6308 Make :- SKF/NBC.

Supply only ball bearing No. 6309 Make :- SKF/NBC.

Supply only ball bearing No. 6313 Make :- SKF/NBC.

Supply only ball bearing No. 6314 Make :- SKF/NBC.

Supply only ball bearing No. 6316 Make :- SKF/NBC.

Supply only ball bearing No. 7316 Make :- SKF/NBC.

Supply only steel distance piece suitable for centrifugal pumping set capacity of 60HP to 125HP. Make :- As per sample approved by Engineer-in-charge.

Supply only steel distance piece suitable for centrifugal pumping set capacity of 15HP to 50HP. Make :- As per sample approved by Engineer-in-charge.

Supply only steel distance piece suitable for centrifugal pumping set capacity of 1HP upto 12.5HP. Make :- As per sample approved by Engineer-in-charge.

Supply only gland plates with studs / eye bolt suitable for centrifugal pumping set capacity of 60HP to 125HP. Make :- As per sample approved by Engineer-in-charge.

Supply only gland plates with studs / eye bolt suitable for centrifugal pumping set capacity of 15HP to 50 HP. Make :- As per sample approved by Engineer-in-charge.

Supply only gland plates with studs / eye bolt suitable for centrifugal pumping set capacity 1HP upto 12.5HP. Make :- As per sample approved by Engineer-in-charge.

Supply only carbon steel shaft high tensile strength with key suitable for centrifugal pumping set capacity of 60HP to 125HP. Make :- As per sample approved by Engineer-in-charge.

Supply only carbon steel shaft high tensile strength with key suitable for centrifugal pumping set capacity of 15 HP to 50 HP. Make :- As per sample approved by Engineer-in-charge.

Supply only carbon steel shaft high tensile strength with key suitable for centrifugal pumping set capacity of 1HP upto 12.5HP. Make :- As per sample approved by Engineer-in-charge.

Supply only cast iron impeller suitable for centrifugal pumping set capacity of 60HP to 125HP. Make :- As per sample approved by Engineer-in-charge.

Supply only cast iron impeller suitable for centrifugal pumping set capacity of 15 HP to 50HP. Make :- As per sample approved by Engineer-in-charge.

Supply only cast iron impeller suitable for centrifugal pumping set capacity of 1HP upto 12.5HP. Make :- As per sample approved by Engineer-in-charge.

Supply only brass / gun metal bush DE & NDE suitable for centrifugal pumping set capacity of 60HP to 125HP. Make :- As per sample approved by Engineer-in-charge.

Supply only brass / gun metal bush DE & NDE suitable for centrifugal pumping set capacity of 15HP to 50HP . Make :- As per sample approved by Engineer-in-charge.

Supply only brass / gun metal bush DE & NDE suitable for centrifugal pumping set capacity of 1HP upto 12.5HP . Make :- As per sample approved by Engineer-in-charge.

Supply only bushes for open well type submersible pumping set of capacity upto 12.5 HP Make :- As per sample approved by Engineer-in-charge.

Supply only bushes for bore well submersible pumping set of capacity upto 12.5 HP Make :- As per sample approved by Engineer-in-charge.

Supply only bushes for bore well submersible pumping set of capacity above 15 HP to 30 HP Make :- As per sample approved by Engineer-in-charge.

Supply only super enameled copper winding wire . Make :- As per sample approved by Engineer-in-charge.

Supply and fixing in replacement power contactor 415 volt, 50 cycles, 3 phase, Type ML-6 complete all as specified and as directed by Engineer-in-charge.Make L&T or equivalent make Siemens / ABB/BCH/Crompton Greaves

Supply and fixing in replacement power contactor 415 volt, 50 cycles, 3 phase, Type ML-4 complete all as specified and as directed by Engineer-in-charge. Make L&T or equivalent make Siemens / ABB/BCH/Crompton Greaves

Supply and fixing in replacement power contactor 415 volt, 50 cycles, 3 phase, Type ML-2 complete all as specified and as directed by Engineer-in-charge. Make L&T or equivalent make Siemens / ABB/BCH/Crompton Greaves

Supply and fixing in replacement power contactor 415 volt, 50 cycles, 3 phase, Type ML-3 complete all as specified and as directed by Engineer-in-charge. Make L&T or equivalent make Siemens / ABB/BCH/Crompton Greaves

Supply and fixing in replacement power contactor 415 volt, 50 cycles, 3 phase, Type MNX 70 complete all as specified and as directed by Engineer-in-charge. Make L&T or equivalent make Siemens / ABB/BCH/Crompton Greaves

Supply and fixing in replacement power contactor 415 volt, 50 cycles, 3 phase, Type MNX 80 complete all as specified and as directed by Engineer-in-charge. Make L&T or equivalent make Siemens / ABB/BCH/Crompton Greaves

Supply and fixing in replacement power contactor 415 volt, 50 cycles, 3 phase, Type MNX 110 complete all as specified and as directed by Engineer-in-charge Make L&T or equivalent make Siemens / ABB/BCH/Crompton Greaves

Supply and fixing in replacement power contactor 415 volt, 50 cycles, 3 phase,Type LCI 80 Amp complete all as specified and as directed by Engineer-in-charge.Make L&T or equivalent make Siemens / ABB/BCH/Crompton Greaves

Supply and fixing in replacement power contactor 415 volt, 50 cycles, 3 phase, Type LCI 60 Amp complete all as specified and as directed by Engineer-in-charge. Make L&T or equivalent make Siemens / ABB/BCH/Crompton Greaves

Supply and fixing in replacement bimetal over load relay single phase protection directly mounted 28 to 42 Amps, range ML2/ML3 complete all as specified and as directed by Engineer-in-charge. Make : Siemens /Crompton Greaves/Larson & tubro

Supply and fixing in replacement bimetal over load relay single phase protection directly mounted 66 to 110 Amps, range MN5 complete all as specified and as directed by Engineer-in-charge. Make : Siemens /Crompton Greaves/Larson & tubro

Supply and fixing in replacement bimetal over load relay single phase protection directly mounted 45 to 75 Amps, range MN5 complete all as specified and as directed by Engineer-in-charge. Make : Siemens /Crompton Greaves/Larson & tubro

Supply and fixing in replacement bimetal over load relay single phase protection directly mounted 57 to 66 Amps, range LRID complete all as specified and as directed by Engineer-in-charge. Make : Siemens /Crompton Greaves/Larson & tubro

Supply and fixing in replacement bimetal over load relay single phase protection directly mounted 48 to 57 Amps, range LRID complete all as specified and as directed by Engineer-in-charge. Make : Siemens /Crompton Greaves/Larson & tubro

Supply and fixing in replacement electronic timer (time delay relay) of range 12-120 sec, input voltage 220 to 240 volts AC complete all as specified and as directed by Engineer-in-charge. Make L&T/ABB/CG/Siemens

Supply and fixing in replacement single phase preventor suitable to protect the electric motor of capacity 20HP to 120HP, 3 phase, 415 Volts, 50 cycle complete all as specified and as directed by Engineer-in-charge . Make : ABB/ GE/BCH/Havells/Siemens/L&T

Supply and fixing in replacement MCCB, 400 Amp, 4 pole ,415 Volts, 50 cycle, breaking capacity 36KA thermal setting 80-100%, Ics-100% Icu confirming to IEC-947, IS-13947 , including thimbles, nuts, bolts, washers etc complete all as specified and as directed by Engineer-in-charge .Make : LARSEN & TUBRO/ SIEMENS/LEGRAND/SCHNEIDER/HAVELLS INDIA LTD/C & S ELECTRIC LIMITED (C & S) / ABB

Supply and fixing in replacement MCCB, 250 Amp, 4 pole ,415 Volts, 50 cycle, breaking capacity 36KA thermal setting 80-100%, Ics-100% Icu confirming to IEC-947, IS-13947 , including thimbles, nuts, bolts, washers etc complete all as specified and as directed by Engineer-in-charge .Make : LARSEN & TUBRO/ SIEMENS/LEGRAND/SCHNEIDER/HAVELLS INDIA LTD/C & S ELECTRIC LIMITED (C & S) / ABB

Supply and fixing in replacement MCCB, 200 Amp, 4 pole ,415 Volts, 50 cycle, breaking capacity 36KA thermal setting 80-100%, Ics-100% Icu confirming to IEC-947, IS-13947 , including thimbles, nuts, bolts, washers etc complete all as specified and as directed by Engineer-in-charge .Make : LARSEN & TUBRO/ SIEMENS/LEGRAND/SCHNEIDER/HAVELLS INDIA LTD/C & S ELECTRIC LIMITED (C & S) / ABB

Supply and fixing in replacement MCCB, 250Amp, 3 pole ,415 Volts, TPN, 50 cycle, breaking capacity 36KA thermal setting 80-100%, Ics-100% Icu confirming to IEC-947, IS-13947 , including thimbles, nuts, bolts, washers etc complete all as specified and as directed by Engineer-in-charge .Make : LARSEN & TUBRO/ SIEMENS/LEGRAND/SCHNEIDER/HAVELLS INDIA LTD/C & S ELECTRIC LIMITED (C & S) / ABB

Supply and fixing in replacement MCCB, 200 Amp, 3 pole ,415 Volts, TPN, 50 cycle, breaking capacity 36KA thermal setting 80-100%, Ics-100% Icu confirming to IEC-947, IS-13947 , including thimbles, nuts, bolts, washers etc complete all as specified and as directed by Engineer-in-charge .Make : LARSEN & TUBRO/ SIEMENS/LEGRAND/SCHNEIDER/HAVELLS INDIA LTD/C & S ELECTRIC LIMITED (C & S) / ABB

Supply and fixing in replacement MCCB, 160 Amp, 3 pole ,415 Volts, TPN, 50 cycle, breaking capacity 25KA thermal setting 80-100%, Ics-100% Icu confirming to IEC-947, IS-13947 , including thimbles, nuts, bolts, washers etc complete all as specified and as directed by Engineer-in-charge .Make : LARSEN & TUBRO/ SIEMENS/LEGRAND/SCHNEIDER/HAVELLS INDIA LTD/C & S ELECTRIC LIMITED (C & S) / ABB

Supply and fixing in replacement MCCB, 125Amp, 3 pole ,415 Volts, TPN, 50 cycle, breaking capacity 36 KA thermal setting 80-100%, Ics-100% Icu confirming to IEC-947, IS-13947 , including thimbles, nuts, bolts, washers etc complete all as specified and as directed by Engineer-in-charge .Make : LARSEN & TUBRO/ SIEMENS/LEGRAND/SCHNEIDER/HAVELLS INDIA LTD/C & S ELECTRIC LIMITED (C & S) / ABB

Supply and fixing in replacement MCCB, 100 Amp, 3 pole ,415 Volts, TPN, 50 cycle, breaking capacity 25KA thermal setting 80-100%, Ics-100% Icu confirming to IEC-947, IS-13947 , including thimbles, nuts, bolts, washers etc complete all as specified and as directed by Engineer-in-charge .Make : LARSEN & TUBRO/ SIEMENS/LEGRAND/SCHNEIDER/HAVELLS INDIA LTD/C & S ELECTRIC LIMITED (C & S) / ABB

Supply and fixing in replacement flexible spare tyre coupling TC -015 Make - Unitech

Supply and fixing in replacement flexible spare tyre coupling TC -016 Make - Unitech

Supply and fixing in replacement flexible spare tyre coupling TC -017 Make - Unitech

Supply and fixing in replacement flexible spare tyre coupling TC -018 Make - Unitech

Supply and fixing in replacement fully automatic star delta starter 415 volts 3 phase with single phase protection feature with relay range 66 to 110 Amp and contractors suitable for 125 HP electric motor complete disconnecting/removing the defective from existing LT panel and refixing the new in same poisition and making electric connections all as specified and directed Make - LARSEN & TUBRO / SIEMENS / HAVELLS INDIA LTD / LEGRAND / SCHNEIDER

Supply and fixing in replacement fully automatic star delta starter 415 volts 3 phase with single phase protection feature with relay range 45 to 75 Amp and contractors suitable for 75 HP electric motor complete disconnecting/removing the defective from existing LT panel and refixing the new in same poisition and making electric connections all as specified and directed Make - LARSEN & TUBRO / SIEMENS / HAVELLS INDIA LTD / LEGRAND / SCHNEIDER

Supply and fixing in replacement fully automatic star delta starter 415 volts 3 phase with single phase protection feature with relay range 30 to 50 Amp and contractors suitable for 50 HP electric motor complete disconnecting/removing the defective from existing LT panel and refixing the new in same poisition and making electric connections all as specified and directed Make - LARSEN & TUBRO / SIEMENS / HAVELLS INDIA LTD / LEGRAND / SCHNEIDER

Suply and fixing in replacement fully automatic star delta starter 415 volts 3 phase with single phase protection feature with relay range 48 to 57 Amp and contractors suitable for 60 HP electric motor complete disconnecting/removing the defective from existing LT panel and refixing the new in same poisition and making electric connections all as specified and directed Make - LARSEN & TUBRO / SIEMENS / HAVELLS INDIA LTD / LEGRAND / SCHNEIDER

Suply and fixing in replacement fully automatic star delta starter 415 volts 3 phase with single phase protection feature with relay range 20 to 32 Amp and contractors suitable for 30 HP electric motor complete disconnecting/removing the defective from existing LT panel and refixing the new in same poisition and making electric connections all as specified and directed Make - LARSEN & TUBRO / SIEMENS / HAVELLS INDIA LTD / LEGRAND / SCHNEIDER

Supply and fixing in replacement direct on line (DOL) starter in sheet metal enclosure type, 415 Volt, MK-1 suitable for and upto 6HP electric motor complete all as specified and as directed by Engineer-in-charge.Make - LARSEN & TUBRO / SIEMENS / HAVELLS INDIA LTD / LEGRAND / SCHNEIDER

Material and labour for painting on brick , stone, concrete, asbestos cement or plastered surfaces of any description over 10cm girth or width and painting with two coats of synthetic enamel paint complete including prepering old surface all as specified and directed.

L H ENTERPRISES

SS CONSTRUCTION

M/s RAMESH KUMAR VERMA CONTRACTORS