REPAIRS TO ALUMINUM AND WOODEN JOINERIES, PLASTERING, FLOOR AND STAIRCASE IN COMMON AREA AT CERTAIN BLDGS AT OLD RS COLABA UNDER AGE B/R-II OF GE (NW) NAVY NAGAR, COLABA, MUMBAI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge..

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed by Engineer-in-Charge..

Material & Labour for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed by Engineer-in-Charge..

Material & Labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge..

Material & Labour non-skid coloured Ceramic tiles 300x300x7-8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match including 20 mm thick screed bed in CM 1:6 all as specified.

Material & Labour Coloured glazed ceramic tiles 300 x 200 x 7-8mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment complete all as specified and directed

Material & Labour Coloured glazed ceramic tiles 450 x300 x7-8 mm thick on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment

Material & Labour for rendering 10mm thick in cement mortar 1:4 on backing coat of wall tiles etc complete all as specified and directed.

Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water in patches n.exc. 4 Sqm each complete all as specified and directed

Material & Labour for rendering 15mm thick in CM 1:6 on other than fair faces of bricks work or concrete finished even and smooth without using extra cement complete all as specified and directed

Material & Labour for 05 mm thick plastering in CM 1:3 on concrete surface on ceiling finished even and smooth all specified & as directed.

Preparing surfaces, plastered or unplastered new surfaces, priming plastered and other surfaces with alkali-resistant priming paint and applying two coats of distemper oil emulsion over a coat of wall care putty, white or tinted on walls complete all as specified and directed

Complete removal of existing treatment from wall surfaces by scrapping, washing & applying two coat of Oil bound distemper of approved make on wall over a coat of wall priming paint over a coat of Birla white putty on plastered surface and filling the surface inperfections such as holes, dirt, fine cracks all complete including preparation of surfaces all as specified and as directed.

Material & Labour for Preparation of surface plastered or unplastered old surfaces and applying two coats of white wash on on ceiling complete all as specified and directed

Material & Labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

Material & Labour for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and as directed.

Material & Labour for Preparation of old painted surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of antirush paint/red oxide primer, complete all as specified and as directed.

Dismantling of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, approns etc complete all as specified and directed

Material & Labour Granite (of any type) 20mm thick machine cut, over 15mm thick cement screed bed in CM 1:6 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding complete all as directed by Engr-in-Charge.

Material & Labour 20mm thick Granite (of any type) over 12mm thick backing coat in CM 1:4 machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as directed by Engr-in-Charge.

Material & Labour machine cut Kota stone (greenish colour, mirror polished) slab flooring 18 to 20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing, over & incl 20mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Material & Labour Plain aluminium sheeting 0.56 mm thick fixed as in crumple section complete all as specified and directed

Dismantling of MS grill of any description and position etc complete all as specified and directed

Material & Labour for fabrication of framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conform to Fe 290 Gde-E-165 & fixed in position as directed etc complete all as specified and directed

Material & Labour for Preparation of new surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of antirush paint/red oxide primer, complete all as specified and as directed by EIC.

Taking down chowkats with shutter (without taking shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws and locking arrangement etc complete all as specified and directed by Engineer-in-Charge..

Supply & Fixing aluminium alloy wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium wire staples alu shutters complete all as specified and directed by Engineer-in-Charge..

Supply & Fixing 4 mm thick figured glass pin headed type and glazing with aluminium and neoprene beads in square not exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge..

Supply & Fixing 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge..

Material & Labour aluminium anodised grill with suitable aluminium anodised frame section according to IS 1868 of approved design /pattern with apprived standard section fixing to window frame with CP brass /stainless steel screw including cutting the grill to proper opening size for fixing and operation of handles and fixing aapproved anodised aluminuim standard section aroung the opening all complete as specified and directed by Engineer-in-Charge..

Taking down shutters of any description exc 2 sqm each with all fittings complete all as specified and directed

Supply & Fixing 40 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed

Supply & Fixing 150 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed

Supply & Fixing 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed

Supply & Fixing 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

Supply & Fixing 100mm size stainless steel medium weight butt hinges complete all as specified and directed

Material & Labour for Preparation of new surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down CI gutters pipe and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store complete all as specified and directed

Supply & Fixing CI soil/waste/vent pipe in any length with ears 100mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed.

Supply & Fixing CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed.

Supply & Fixing CI bends (any radius) for soil/waste pipes 100mm bore diminishing pieces or tapers on walls complete all as specified and directed

Supply & Fixing CI bends (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers on walls complete all as specified.

Supply & Fixing CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 100mm bore pipe (Y or T) complete all as specified and directed

Supply & Fixing CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 75mm bore pipe (Y or T) complete all as specified and directed

Supply & Fixing PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

Supply & Fixing PVC (SWR) bends 160mm bore any radius complete all as specified and directed

Removal of debries outside of MD land exc. 5 Km but n.exc. 10km complete all as specified and directed

DHARICHHAN ENTERPRISE

satguruenterprises

satyanarayan conastruction

SHREE JAGDISH FURNITURE CO.

SHRI SAI ENTERPRISES

M/s. MAYUR ENTERPRISES