Providing Temporary shed to veterinary office at Kadmat

Amount

Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge. In Cement mortar

Felling trees of girth (measured at a hight of 1 mtr above ground level ) including cutting of trunks and branches removing the roots and stacking of servicable materials and disposable opf unservicable materials . Byond 60 cms and upto 120 cm in girth

Surface dressing of the ground including removing vegitation and in equalities not exceeding 15cm deep and disposal of rubbish lead up to 50 metres and lift up to 1.5 metres

Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, ncluding the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Cold twisted steel reinforcement for R.C.C. work including bending, binding and placing in position complete

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mAll kinds of soil.

Providing and laying cement concrete 1: 5:10 ( 1 cement: 5 M.Sand:10 granite chips ) foundation and plinth.Stone aggregate 40mmnomonal size

Brick work with modular bricks of class designation in foundation and plinth in C.M.1:6 (1Cement: 6 Metal sand)

Filling with Quarry waste/debris ( Dismantled materials issued by department) in trenches, plinth, sides of foundations etc layers not exeeding 20cm plinth, side od foundations etc layers not exceeding 20cm and watering lead up to 5KM and lift up to 1.50mtr including loading , transportation and unloading at site

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer G.I. pipes

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. (a) Sal wood

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Providing and fixing anodised Aluminium sliding door bolt anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. 300x16mm

12mm cement plaster 1:3 (1cement :3 metal sand) finished with floating coat of neat cement

Providing non-asbestos high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (As per IS: 14871) roofing upto any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete excluding the cost of purlins, rafters and trusses corrugated sheets and including cutting to size and shape wherever required

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (a)White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing CP brass angle cock of approved quality and manufacture complete.15 mm

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work 25/20 mm nominal bore

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work.including srapping&sand peparing

muflehudheen

BARKATHULLA BS

MUJEEB RAHMAN SK