Providing and installing DG set paralleling synchronisation control system comprising digital genset controller PLC and HMI display for 2 Nos. 1010 KVA DG at AIMSS Chamiana Shimla.

Supply installation testing and commissioning of Engine Control & Paralleling Digital Genset Controller (Paralleling Type) Microprocessor-based; 3-Phase sensing for Gen & Bus; Built-in Auto-Sync, kW/kVAr Load Sharing; PID Control for Governor/AVR; CANbus J1939, RS-485 Modbus; LCD Display; IP65 Front.make DEIF (AGC 150) / ComAp (InteliGen) / Deep Sea (DSE 8610) or any other make approved by engineer in charge

Supply installation testing and commissioning of Supervisory Control Programmable Logic Controller for 1010 KVA Dg set (PLC) CPU 24 Digital Inputs (24V DC), 16 Digital Outputs (Relay 2A); Integrated Ethernet (Profinet) & RS-485; 40KB User Memory; Supply: 85-264V AC; Expandable I/O architecture. Siemens (S7-200 SMART) / Schneider (M221) / Mitsubishi (FX5U) or any other make approved by engineer incharge

supply installation testing and comissioning of display unit HMI & Interface Human Machine Interface\ (HMI) - 4.3" TFT Resistive Touch; 65k Colors; 480x272 Resolution; Ethernet, Serial (RS232/485) & USB Host/Device; Protocol support for Modbus, Profinet, and OPC UA. Schneider (ST6000) / Siemens (KTP400) / Weintek (MT8071)

supplying and drawing of Shielded Communication Cable 2-Core Twisted Pair; 0.5 sq.mm; Tinned Copper Conductor; Al-Mylar Tape Shielding with ATC Drain Wire; Low Capacitance for High-Speed RS-485/CAN transmission. Belden (9841) / Lapp (Unitronic) / Polycab

supply installation testing and comissioning of Switchgear Interface Panel Interfacing Hardware Kit Control Terminal Blocks (Spring/Screw Type); UVResistant Nylon Ties; Insulated Copper Lugs (Pin/Ring/ Fork); Ferrule markers for wire identification; Din-rail mounting clips. Phoenix Contact / WAGO / Connectwell

providing Engineering, PLC & HMI Programming Services Custom Ladder/FBD development for DG load management, manual/auto interlocking, sequence of events, and HMI SCADA mimic development. Certified Systems IntegratorOEM / Certified Service Partner and ensuring all the components from sr no 1 to 6 shall work in tendum in order to make synchorinisation pf 2 no 1010 KVA DG set by ststic or dyanamic way.

Commissioning Controller Configuration & Tuning Genset AVR/Governor PID tuning; Voltage/Frequency window setup; Synchronization check verification; Load sharing (kW/kVAr) validation. OEM / Certified Service Partner and ensuring all the components from sr no 1 to 6 shall work in tendum in order to make synchorinisation pf 2 no 1010 KVA DG set by ststic or dyanamic way.