PROVN OF STORE SHELTER IN E AND F DIV TO INCLUDE CGI SHEET ROOF AND WALLS WITH LOCKABLE DOOR AND LIGHTING AT JC WG AT AWC UNDER GE (AWC) MHOW

Amount

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out soft/loose soil all as specified and as directed.

Returning, filling in, trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cm Soft / loose soil all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc1.5m above the starting point Soils all as specified and as directed.

M & LTreating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area all as specified and as directed.

M & L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) all as specified and as directed.

M & L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface all as specified and as directed.

M & L Treating the soil under plinth protection at the rate 5 litres of emulsion per square metre of surface area all as specified and as directed.

M&L 18-20 mm thick Sand filling and spreading under floors (interlocking tiles) or in foundations or under & over cable including watering and consolidation with material and labour all as specified and as directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M & L for RCC 1:1.5:3 type A-1, using 20 mm graded stone aggregate as in column footing including raft footings, foundation, plinth beam, bases of columns etc. complete all as specified and directed.

M & L for RCC type A-1, 1:1.5:3 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves and the like complete all as specified and directed

Formwork to sides of concrete foundations footings bases of columns raft and raft beams sides and sofits (if any) of foundation and plinth beams, and similar work vertical or to batter rough finished sufraces of concrete complete all as specified and directed.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200 mm thick surface of concrete complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

Description same as per item No. 15.00 but 6 mm to 8 mm dia complete all as specified and directed.

Description same as per item No. 17.00 but 5 mm dia and over upto and including 10mm dia in stirrups spacers amd binders quality confirming to TMT bar complete all as specified and directed.

M&L brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete.

M & L Plastering 15 mm thick in two layers of 10 mm thick in bottom and 5 mm thick with WPC of top layer in Cement Mortar 1:4 on Fair Faces of Brick Wall, Cement block wall or on Concrete Surfaces, Surface Finished Even and Smooth without using Extra Cement complete all as specified and as directed. (NOTE-WPC will be measured and paid separately)

Suppl only integral water proof compound and mixed with required qty as specified and directed.

M & L Preparation of newly plastered surface and apply two coat of cement base paint over coat of wall primer complete all as specified and directed.

M & L Cement concrete 25 mm thick type B-1, 1:2:4 (20mm graded aggregate) as in level course.

M & L 25mm thick Damp proof course to horizontal or vertical surfaces in cement mortar 1:2:4 including necessary formwork complete all as specified and directed.

M & L applying evenly a coat of blow type bitumen at the rate of 1.50kg per square metre and blinding with clean dry sand @ 0.05 cu.m per sq. m complete all as specified and directed.

M & L 20 to 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

Description same as per item No. 25.00 but as in 20-25 mm thick skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E-250) quality-A

S & F 1.00 mm thick Mild steel plain sheet covering to door shutters; covering to door chowkats (frames) cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars , dovetailed or welded complete all as specified.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified.

S&F Steel ventilators with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as dircted and specified.

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

S & F Galvanised steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

S & F 3 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete . Note :- Fixing only rate is included in window/door shutter items considered therein

M & L for preparation of new steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer completed all as specified and directed.

M&L for Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed

M&L for 150 mm thick Hard core of broken stone/boulder , broken to gauge n exc 63 mm.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete.

M&L 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base to foot path etc.

M & L Precast cement concrete block Type B1 1:2:4 (20 mm graded aggregate) masonry with solid blocks exc 10 cm in width and grouting and setting in cement mortar 1:6 complete all as directed and specified.

S & F Machine pressed precast concrete intelocking paver block any shape & size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade set with grey cement and pigment including packing of side with PCC 1:2:4 complete all as specified and directed.

S & F Joist, channel, angle or tee , square or rectangular sections, beam , etc fixed indipendently including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting plates with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.(Fe-410-W(Gde-E-250) quality A).Note :- Fabrication like cutting , welding, bending , or any other nature of work shall be at site or shop including in above rate.

S & F Rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc confirming to Fe 410-W-(Gde-E-250)quality-A complete all as specified and directed. Note :- Fabrication of roof truss, purlins post , rafter etc cutting , welding, bending , or any other nature of work shall be at site or shop including in above rate.

S & F Plates (plain or chequered) channels , square or beams cut or notched (ordinary and counter sunk) forming holes, without any attachments or with rivited, bolted ot welded attachments, etc confirming to Fe 410-W(Gde-E-250)quality-A complete all as specified and directed. Note - cutting to require size and welding or boulting to Beam , post, rafter shall be at site, rate included in this item.

S & F Pre-painted galvalum aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength as in roof covering/clading to wall , it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

S & F Pre-painted galvalum aluminium zinc coating GI based plain steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws all as specified and directed.

S & F 2 mm thick Fibre glass reinforcement translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as direted and specfied.

S & F 100 mm dia Mild steel eaves gutters or rain water gutters 1 mm thick , glavanised class half round with rounded edges including fixing to iron work with half round clamps by screwing bolting etc., complete all as specified and directed.

S & F 100 dia Mild steel stop ends 1 mm thick (for spigot or socket ends) complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps by bolting, screwing. Drilling etc complete all as specified and directed .

S & F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed.

S & F Stainless Steel Roof Ventilator Wind Turbine Air Vent Attic Ventilator Material: Stainless Steel, Aluminum of Dia: 380 mm, Net Weight: 4 kgs (approx), Nos. of Fins : 38 Nos, Thickness: 0.50 mm including cutting, bending , of existing sheet and glueing for gaps complete all as specified and directed .

S & F Mild steel bolts of exc 20 and not exc 25 mm dia , purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed / surface conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly complete all as specified and directed for one light / fan/ bell controlled by one ,one way switch 5/6 Amps. Make :- V Marc, Polycab, Havell's, RR Kabel

Description same all as per item No 54.00 here in before but One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch

M&L for Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed / surface conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board complete complete all as specified and directed . Make :- V Marc, Polycab, Havell's, RR Kabel

Supply and fixing modular metal flush box 3 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular metal flush box 6 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular metal flush box 8 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 3 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 6 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 8 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V . Make:- Anchor , Legrand,Crabtree (Havell's)

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S & F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S&F switch socket combination modular type multipurposes 6/16 A, 1 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S&F switch socket combination modular type multipurposes 6/16 A, 2 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S & F wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 W LED fitting 4 feet long complete all as specified and directed. Make:-Havells cat part No- cat No :-LUMILINEPLUSBS 20WLED865SPCSS / WIPRO cat part No :- D532065 /Bajaj Cat part No:-112785

S & F LED street light fitting 30 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete all as specified and directed. Make:- Havells Cat No. ENDURACITYLITEPLATPLUSSL 30WLED757SASYBOPC / WIPRO cat part No :-LR02-291-XXX-57-XX / Bajaj Cat part No:-169887

Supply and fixing MCB DB, SPN, double door 8 ways, 240 volts capacity complete all as specified. Make : L&T Cat No :-DBSPN008DD HPL Cat pt No- DBECOTDD08 / Indo Asian Cat No-811806

Supply and fixing MCB DP 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T Cat No :-BB20400C HPL Cat pt No- TSPNC40 / Indo Asian Cat No-811152

Supply only MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T Cat No :-BB10320C HPL Cat pt No- TSPC6-32 / Indo Asian Cat No-811129

S&F exhaust fan AC single phase 230 volt 300 mm sweep, 900 RPM with louver complete all as specified and directed. Make:- Bajaj Model Supreme Plus Cat No.-70069 / Havells model Turbo Force SP / Usha Model Turbo Heavy Duty

Supply and fixing ceiling fan complete with electronic type regulators and accessories 230 volt, 1200 mm sweep, 5 star rated complete all as specified Make:- Bajaj model speed star Cat No:- 250917, Havells model Velocity HS, Crompton model Aura Prime.

Sub main wiring with 2 x 6 Sqmm, PVC insulated PVC unsheathed stranded FRLS copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 4 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and directed. Make:- RR Kable, Havells India, Polycab

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to 32 x 6mm GI earth strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

S & laying reinforced precast concrete cable cover class LV, type 1 flat, size 250x150mmx40mm.

Supply, laying or fixing, jointing and testing LT under ground electric power cable of size 10 sqmm, 2 core. Crossed linked polyethylene (XLPE Cable ) insulated, galvanised steel strip or wire armoured, ISI -7098 Marked. With aluminium conductor multi stranded , heavy duty 1100 Volts grade complete all as specified laid in tenches / laid under floor or fixed with walls/ on poles/ in ducts/ in GI pipes etc including taking down existing complete all as directed at site. Make:- Finolex,RPG(Asian),RR Kable, Universal

KAILASH CHANDRA KHANDELWAL

Chitragupta Construction

ram prashad chotelal batham

M/S UnitedConstruction