Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
23 Jul 2025, 3:00 pmClosed
PR & CC
This Tender is for the job of supply, fabrication, erection, Installation,hook up,tying in, testing,
2500021614-HD-07750
5100021614
Open Tender
Bengaluru Urban, Karnataka
23 Jul 2025
2 Jul 2025
23 Jul 2025
23 Jul 2025
3 Jul 2025 - 14 Jul 2025
| Item No | Item Title | Description | Qty | Unit |
|---|---|---|---|---|
| 1 | 14” NB CS Pipe A 106 Gr. B, | 14” NB CS Pipe A 106 Gr. B, — "Supply (duly inspected by approved TPI), Fabrication and laying of above ground Product lines and placing on the pedestals, Rack, gantry structures, structural bridges/catwalks including welding of pipes, bends, reducers, pipeline fittings etc. radiography test of 10% joints, carrying out repairs if any and re-radiography, per-testing, hook up with the pipeline on either end, hydro-testing of entire section of pipes to a pressure of 16.6kg/cm2 including supply of all tools, tackles, machinery, equipment, instruments, manpower etc. for completion of the job. Job is to be completed in all respect as per standard welding specifications. The scope the job includes but not limited to the following: Receiving owner supplied materials, if any, including handling, hauling/loading, transportation to work site, unloading and stringing. cutting, beveling, grinding, edge preparation (including any additional cutting, beveling, grinding required for perfect fit up, between the edges of the pipes, bends, etc.), aligning, fit-up, welding of pipes as per approved technical specifications/procedures of this tender. Root run shall be with E-6010 electrode and intermediate and finished welding shall be with E-7018 electrodes of ESAB or approved equivalent. The job also includes fabrication of any Bends, Tees, Eccentric/Concentric Reducers other than the ones supplied. Note: All flanges, valves, bends, tees and other applicable are also to supplied by vendor as they are paid under separate line items. If leakage through the pipe seam joint is observed, contractor shall remove the defective portion of the pipeline and replace with a new pipe and retest it at no extra cost to HPCL. Length of the flange, valves shall not be measured as they are paid separately. Execution of the job shall be as per latest codal provisions and attached technical specifications." | - | Running Meter |
| 2 | 12” NB CS Pipe A 106 Gr. B, | 12” NB CS Pipe A 106 Gr. B, — "Supply (duly inspected by approved TPI), Fabrication and laying of above ground Product lines and placing on the pedestals, Rack, gantry structures, structural bridges/catwalks including welding of pipes, bends, reducers, pipeline fittings etc. radiography test of 10% joints, carrying out repairs if any and re-radiography, per-testing, hook up with the pipeline on either end, hydro-testing of entire section of pipes to a pressure of 16.6kg/cm2 including supply of all tools, tackles, machinery, equipment, instruments, manpower etc. for completion of the job. Job is to be completed in all respect as per standard welding specifications. The scope the job includes but not limited to the following: Receiving owner supplied materials, if any, including handling, hauling/loading, transportation to work site, unloading and stringing. cutting, beveling, grinding, edge preparation (including any additional cutting, beveling, grinding required for perfect fit up, between the edges of the pipes, bends, etc.), aligning, fit-up, welding of pipes as per approved technical specifications/procedures of this tender. Root run shall be with E-6010 electrode and intermediate and finished welding shall be with E-7018 electrodes of ESAB or approved equivalent. The job also includes fabrication of any Bends, Tees, Eccentric/Concentric Reducers other than the ones supplied. Note: All flanges, valves, bends, tees and other applicable are also to supplied by vendor as they are paid under separate line items. If leakage through the pipe seam joint is observed, contractor shall remove the defective portion of the pipeline and replace with a new pipe and retest it at no extra cost to HPCL. Length of the flange, valves shall not be measured as they are paid separately. Execution of the job shall be as per latest codal provisions and attached technical specifications." | - | Running Meter |
| 3 | 10” NB CS Pipe A 106 Gr. B, | 10” NB CS Pipe A 106 Gr. B, — "Supply (duly inspected by approved TPI), Fabrication and laying of above ground Product lines and placing on the pedestals, Rack, gantry structures, structural bridges/catwalks including welding of pipes, bends, reducers, pipeline fittings etc. radiography test of 10% joints, carrying out repairs if any and re-radiography, per-testing, hook up with the pipeline on either end, hydro-testing of entire section of pipes to a pressure of 16.6kg/cm2 including supply of all tools, tackles, machinery, equipment, instruments, manpower etc. for completion of the job. Job is to be completed in all respect as per standard welding specifications. The scope the job includes but not limited to the following: Receiving owner supplied materials, if any, including handling, hauling/loading, transportation to work site, unloading and stringing. cutting, beveling, grinding, edge preparation (including any additional cutting, beveling, grinding required for perfect fit up, between the edges of the pipes, bends, etc.), aligning, fit-up, welding of pipes as per approved technical specifications/procedures of this tender. Root run shall be with E-6010 electrode and intermediate and finished welding shall be with E-7018 electrodes of ESAB or approved equivalent. The job also includes fabrication of any Bends, Tees, Eccentric/Concentric Reducers other than the ones supplied. Note: All flanges, valves, bends, tees and other applicable are also to supplied by vendor as they are paid under separate line items. If leakage through the pipe seam joint is observed, contractor shall remove the defective portion of the pipeline and replace with a new pipe and retest it at no extra cost to HPCL. Length of the flange, valves shall not be measured as they are paid separately. Execution of the job shall be as per latest codal provisions and attached technical specifications." | - | Running Meter |
| 4 | 8” NB CS Pipe A 106 Gr. B, STD | 8” NB CS Pipe A 106 Gr. B, STD — "Supply (duly inspected by approved TPI), Fabrication and laying of above ground Product lines and placing on the pedestals, Rack, gantry structures, structural bridges/catwalks including welding of pipes, bends, reducers, pipeline fittings etc. radiography test of 10% joints, carrying out repairs if any and re-radiography, per-testing, hook up with the pipeline on either end, hydro-testing of entire section of pipes to a pressure of 16.6kg/cm2 including supply of all tools, tackles, machinery, equipment, instruments, manpower etc. for completion of the job. Job is to be completed in all respect as per standard welding specifications. The scope the job includes but not limited to the following: Receiving owner supplied materials, if any, including handling, hauling/loading, transportation to work site, unloading and stringing. cutting, beveling, grinding, edge preparation (including any additional cutting, beveling, grinding required for perfect fit up, between the edges of the pipes, bends, etc.), aligning, fit-up, welding of pipes as per approved technical specifications/procedures of this tender. Root run shall be with E-6010 electrode and intermediate and finished welding shall be with E-7018 electrodes of ESAB or approved equivalent. The job also includes fabrication of any Bends, Tees, Eccentric/Concentric Reducers other than the ones supplied. Note: All flanges, valves, bends, tees and other applicable are also to supplied by vendor as they are paid under separate line items. If leakage through the pipe seam joint is observed, contractor shall remove the defective portion of the pipeline and replace with a new pipe and retest it at no extra cost to HPCL. Length of the flange, valves shall not be measured as they are paid separately. Execution of the job shall be as per latest codal provisions and attached technical specifications." | - | Running Meter |
| 5 | 6” NB CS Pipe A 106 Gr. B, STD | 6” NB CS Pipe A 106 Gr. B, STD — "Supply (duly inspected by approved TPI), Fabrication and laying of above ground Product lines and placing on the pedestals, Rack, gantry structures, structural bridges/catwalks including welding of pipes, bends, reducers, pipeline fittings etc. radiography test of 10% joints, carrying out repairs if any and re-radiography, per-testing, hook up with the pipeline on either end, hydro-testing of entire section of pipes to a pressure of 16.6kg/cm2 including supply of all tools, tackles, machinery, equipment, instruments, manpower etc. for completion of the job. Job is to be completed in all respect as per standard welding specifications. The scope the job includes but not limited to the following: Receiving owner supplied materials, if any, including handling, hauling/loading, transportation to work site, unloading and stringing. cutting, beveling, grinding, edge preparation (including any additional cutting, beveling, grinding required for perfect fit up, between the edges of the pipes, bends, etc.), aligning, fit-up, welding of pipes as per approved technical specifications/procedures of this tender. Root run shall be with E-6010 electrode and intermediate and finished welding shall be with E-7018 electrodes of ESAB or approved equivalent. The job also includes fabrication of any Bends, Tees, Eccentric/Concentric Reducers other than the ones supplied. Note: All flanges, valves, bends, tees and other applicable are also to supplied by vendor as they are paid under separate line items. If leakage through the pipe seam joint is observed, contractor shall remove the defective portion of the pipeline and replace with a new pipe and retest it at no extra cost to HPCL. Length of the flange, valves shall not be measured as they are paid separately. Execution of the job shall be as per latest codal provisions and attached technical specifications." | - | Running Meter |
| 6 | 14” NB CS Pipe A 106 Gr. B, | 14” NB CS Pipe A 106 Gr. B, — Underground Pipeline works : Supply (duly inspected by approved TPI), fabrication, welding, testing, etc.) of work as mentioned above but as applicable for Under Ground Piping work mainly for Road Crossing or wherever required. Job also includes excavation as per requirement, double wrapping and double quoting, lowering and back filling. | - | Running Meter |
| 7 | 12” NB CS Pipe A 106 Gr. B, | 12” NB CS Pipe A 106 Gr. B, — Underground Pipeline works : Supply (duly inspected by approved TPI), fabrication, welding, testing, etc.) of work as mentioned above but as applicable for Under Ground Piping work mainly for Road Crossing or wherever required. Job also includes excavation as per requirement, double wrapping and double quoting, lowering and back filling. | - | Running Meter |
| 8 | 6” NB CS Pipe A 106 Gr. B, STD | 6” NB CS Pipe A 106 Gr. B, STD — Underground Pipeline works : Supply (duly inspected by approved TPI), fabrication, welding, testing, etc.) of work as mentioned above but as applicable for Under Ground Piping work mainly for Road Crossing or wherever required. Job also includes excavation as per requirement, double wrapping and double quoting, lowering and back filling. | - | Running Meter |
| 9 | 20" RCC NP3 Hume pipe | 20" RCC NP3 Hume pipe — Supply & laying of RCC Hume Pipe : Supply/laying/erection of Hume pipes at road crossings. Hume pipes shall be laid such a that, top of pipe must be laid below finished ground level. Job to include collars/joints jointed with stiff mixture of cm 1:2 proportion, curing, aligning and joining & testing etc. to correct line, level, slope and gradient complete. job also include laying of Hume pipe and back filling the trench compacting a using surface vibrator including back filling at all depths and job to be executed as per technical specification and direction of EIC complete. Cost of excavation, PCC bedding, encasing, etc. are not included in the scope of the item and shall be measured and paid separately. | - | Running Meter |
| 10 | 16” RCC NP3 Hume pipe | 16” RCC NP3 Hume pipe — Supply & laying of RCC Hume Pipe : Supply/laying/erection of Hume pipes at road crossings. Hume pipes shall be laid such a that, top of pipe must be laid below finished ground level. Job to include collars/joints jointed with stiff mixture of cm 1:2 proportion, curing, aligning and joining & testing etc. to correct line, level, slope and gradient complete. job also include laying of Hume pipe and back filling the trench compacting a using surface vibrator including back filling at all depths and job to be executed as per technical specification and direction of EIC complete. Cost of excavation, PCC bedding, encasing, etc. are not included in the scope of the item and shall be measured and paid separately. | - | Running Meter |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
2500021614-HD-07750.pdf
TENDER_DOCUMENT • 37.14 MB
Download all tender documents and submit your bid