Special Repair to road at Military Land Prothrapur at AF Stn under GE Brichgunj, Sri Vijaya Puram

Amount

M&L scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exc. 400 Sqm and exc 50mm and n. exc 100mm deep complete all as specified and directed by Engr-in-Charge.

Rolling and consolidating formation surface in cutting using power roller of capacity exc 8 tonne and n exc 12 tonne complete all as specified and directed by Engr-in-Charge.

M&L for 7.5cm thick (compacted thickness) WBM with stone aggregate of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) spread rolled and consolidated to gradient and camber required complete all as specified and directed by Engr-in-Charge. Type of stone to be incorporated is lime stone, sand stone, flint or quartzite stone.

All as per item No 03 here-in-after but except stone aggregate.

Preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on new WBM surfaces and applying evenly a priming/tack coat with bituminious primer (VG-10) @ 10 Kg/10 Sqm with paving bitumen complete all as specified and directed by Engr-in-Charge.

M&L preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all lose dirt etc on black top surfaces and applying evenly a priming/tack coat with bituminous primer (VG -10) @ 5 Kg/10 Sqm with paving bitumen complete all as specified and directed by Engr-in-Charge.

M&L Bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with mechanical paver, mixed at hot mix plant transported to site in tipper,chipping mixed with 5.5% of paving binder (VG-30) viscosity grade incorporating waste @8% by weight of bitumen using dry process in accordence with IRC SP:98-2013, rolled to uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed by Engr-in-Charge.

M & L for premix bituminuos macadam (consolidated thickness not more than 75mm )with 4% binder content of paving bitumen of grade (VG -30) by weight of total mix laid and rolled with 8-12 tonne power roller to required gradient and camber up to the outer edges of roads on existing black top surfaces complete all as specified and directed by Engr-in-Charge.:- Note :- Cost of testing charges, materials and transportation etc for job Mix formulla shall be inclussive in the unit rate and no extra payment shall be admissible on this account. Mix shall be obtain from hot mix plant and spreading shall be done by using mechanical paver only.

M&L for preparation of road surfaces and applying termoplastic reflective paint in marking of minimunm 2.5mm thick as in centre line and edge line road marking in white/yellow (colour approved by AGE/GE) colour & shade of 150/100mm width using 'HOT MARK' termoplastic modern propelled road marking machine incl all ingredients such binder, glass beads, titanium dioxide, calcium carbonate inter fillers termoplastic requirement for glass beads shall be as per table No. 800.4 of MOST specification incl spraying glass beads etc all as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs poly corbonate convex Mirror Out door type 1000/1200 dia made out of fibre along with bracket, Pole mounted and fixed to MS pipe embaded in PCC including necessary earth work required for post holes complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed by Engr-in-Charge.

S & F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA striplens reflector of model No. DA 972.0 or equivalent fixed with and incl MS stud of suitable size as per manufactures instructions all as specified and directed by Engr-in-Charge.

S & F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engr-in-Charge.

K R PRAVEEN KUMAR (BID ID -3518771)

RADHA GOVIND CONSTRUCTION (BID ID -3517413)

M/s Gurunath Construction (BID ID -3517006)

SEVEN HILLS INDUSTRY (BID ID -3513123)

OPS Associates (BID ID -3518776)

Prasur Electricals & Engineering Co. (BID ID -3518731)

Island Agency (BID ID -3518342)

M/s Sriya Enterprises (BID ID -3518756)

A.G.Construction (BID ID -3518749)

Ravi Enterprises (BID ID -3518392)

Chandra Construction Enterprises (BID ID -3518738)

City Constructie Pvt Ltd (BID ID -3518828)