REPAIRS TO SEEPAGE LEAKAGE FROM WALL CHAJJAS FALSE CEILING AND PETTY REPAIRS UNDER GE WELLINGTON

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed. Note: Rates shall be quoted inclusive of required scafolding for a height upto 10 meters buildings till plaster/ pointing and finishes.

Removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in cement mortar; not previously plastered; and scrubbing down with water etc, to receive plaster, complete all as specified and directed. Note :- Rates shall be quoted with required scafolding for a height upto 10 meter buildings till plaster/ pointing and finishes.

Rendering 5mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface, in ceiling of chajjs/ roof projection etc finished even and smooth without using extra cement all as specified and directed Note: Rates shall be quoted inclusive of required scafolding for a height upto 10 meters buildings inclusive of working of item No 1 hereinabefore.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth (without using extra cement) mixed with water proofing compound complete all as specified and as directed. Note: 1. Rates shall be quoted with required scafolding for a height upto 10 meter buildings inclusive of working of Item No. 01 hereinbefore. 2. WPC shall be measured and paid separately.

Rendering 15 mm thick in two layers on stone masonry surfaces or surface other than fair face of brickwork in cement mortar 1:4 finished even and smooth (without using extra cement), mixed with water profing compound complete all as specified and as directed. Note: 1. Rates shall be quoted with required scafolding for a height upto 10 meter buildings inclusive of working of Item No. 01& 02 hereinbefore. 2 WPC shall be measured and paid separately.

Supply only liquid water proofing compound all as specified and directed.

Providing cement concrete type B1 ( 1:2:4) ( 20mm graded aggregate) in roof kerbs or mud stops, over chajjas as padding, rounded or chamferd on edges all as specified and directed.

Applying of 03 coats of heavy duty Acrylic polymer based water proofing coating with integral micro fibre reinforced over one coat of prime coat of PRIME SEAL over roof slab/ chajjas/ wall application and surface preparation to be strictly followed as per the manufacturer instructions including cleaning surfaces covering the prepared substrate at junctions using polymer mortar to fill in the cracks opened up in V grooves complete all as specified and directed. Note: 1. Make: Dr Fixit or equivalent as approved by GE 2. Work shall be carried out through manufacturers applicators only. 3. Rates shall be quoted inclusive of required scafolding for a height upto 10 meters buildings inclusive/ exclusive of working of item No 1hereinabefore.

Preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion Paint (Anti Fungal) white or tinted over a coat of primer complete all as specified and as directed. Note: 1. Rates shall be quoted inclusive of required scafolding for a height upto 10 meters buildings inclusive of working of item No 1 hereinabefore.

Preparation of new plastered surfaces of ceiling and applying two coats of Exterior Emulsion Paint (Anti Fungal) white or tinted over a coat of primer complete all as specified and as directed. Note: 1. Rates shall be quoted inclusive of required scafolding for a height upto 10 meters buildings inclusive of working of item No 1 hereinabefore.

Preparation of old treated / untreated stone / brick wall surfaces and applying two coats of Exterior Emulsion Paint (Anti Fungal) white or tinted complete all as specified and as directed. Note: 1. Rates shall be quoted inclusive of required scafolding for a height upto 10 meters buildings inclusive of working of item No 1 hereinabefore.

Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work/ Stone or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distember over and including one coat of wall care putty including one coat of primer complete all as specified and directed.

Demolition OF RCC of any description and in any position complete all as specified and as directed. Note: Cutting the parapets of roof using RCC cutter only.

Taking down chowkhats or frame not exceeding 1.5 Sqm each with shutters (without taking off shutters from frame) all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm but n. exc 4 sqm each with shutters (without taking off shutters from frame) all as specified and as directed.

UPVC Ventilator frame shall be made of PVC material conforming to IS 10151. of the ventilator frame of extruded UPVC section having over all dimensions 100 x 62 x 50mm having wall thickness 2mm (+) or (-) 0.2mm, corners of wall frame shall be joined by MS galvanised bracket joints mitred and plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm (+) or (-) 0.1mm and the tie rod sahll be provide at the bottom of the frame.The ventilator system should be including glazed with 5.5mm thick glass of size as required in ventilator frame (louvered type) as per manufacturer instructions including all fittings and necessary locking arrangements, complete all as specified and as directed.

Providing and fixing factory made UPVC white colour Sliding window Three track, Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm ((+) or (-)0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+) or (-)0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening will be measured for payment purpose.

All as per item 18 hereinbefore but area exceeding 2.00 sqm each all as specified and as directed.

Mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works all as directed and specified.

Dismantling wall and ceiling board fibre pulp insulation etc or insulation boards/ slabs blankets any thickness, including cover fillets all as directed and specified.

GI frame work for grid of size 605mm x 605mm seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55 thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

12 mm thick Gypsum Board in ceiling fixed with screws as per manufacturers instructions all as specified and as directed.

Applying two coats of distemper oil emulsion on ceilings over priming surfaces with alkali resistant priming paint over a coat of putty including preparation of surfaces complete all as specified and as directed.

Flush pointing in cement mortar 1:3 on wall of bldg including racking out old pointing including removing vegetation grass from wall surface all as specified and directed.

Demolition of Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base floor and finished even and fair complete all as specified and directed.

Chequered cement concrete colour tiles 30 cm x 30 cm x 20-22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, steps etc over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

40mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in floor complete all as specified and directed.

Sand cushion 50mm thick and well ramming including watering as required complete all as specified and directed.

Machine Pressed precast concrete interlocking paver block rubberised any shape and size conforming to IS- 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement and no pigment complete all as specified and directed.

Door closer hydraulically regulated, aluminium extruded section body designation No.1 universal type sutable for door shutters up to 700mm in width and of weight not more than 35Kg and fixed in repairs all as specified and directed.

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 40mm including fixed in repairs complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long fixed in repairs all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 200 mm long fixed in repairs all as specified and directed.

Butt hinges 100mm long medium weight cold rolled mild steel and fixed with screws / welded to frame complete fixed in repairs all as specified and directed.

Butt hinges 75mm long medium weight cold rolled mild steel and fixed with screws / welded to frame complete fixed in repairs all as specified and directed.

40mm dia powder coated cupboard knobs fixed with nut, screw and washer of mild steel, bright finished fixed in repairs all as specified and directed.

Fancy type decorative drapray rod 20 mm dia powder coated including side caps and necessary brackets, as in repairs complete all as specified and directed.

Stainless steel pipe curtain rod 15mm dia fixed with end brackets at pelmet boxes complete fixed in repairs all as specified and directed.

Curtain brackets suitable for 19/25mm bore curtain rod etc complete including fixed in repairs all as specified and directed.

50mm wide 3mm to 6mm thick tappered rubber beading fixed to door shutter with nail as in repair all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring of 140mm overall complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads and supply and fix sheet glass 3mm thick ordinary quality and glazing with oil putty and beads in square not exceeding 0.5 sqm in each pane all as specified and as directed

All as per item No 46 hereinbefore but 4mm thick figured glass pin headed type complete all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple and fixed in repairs all as specified and directed.

Petty repairs to plaster, floor, plinth etc and like in cement mortar 1:4 including preparation roughing and cleaning the surface, making good, finishing even and smooth without using extra cement in patches area not exceeding 0.50 sqm each patch complete all as specified and directed.

Resecuring or easying and adjusting without taking down shutter of any description not exceeding 1 sqm each all as specified and directed.

Resecuring or easying and adjusting without taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm each all as specified and directed.

Petty repairs to PVC door shutter by making minor adjustment to hinges etc easening of shutter including taking down of shutter if required complete all as specified and directed.

Tightening the loose wooden pelment boxes made out of plywood / block board with two new 2nd class hard wood plugs (gutties) of size 30mm x 40mm long embedded in cement mortar 1:3 and two providing new side MS clips and fixed with MS screw complete the length of pelmet not exceeding 1.5M complete all as specified and directed.

Petty repairs to cup board (kitchen) including easing of cup board shutters including taking down and refixing in position of shutters drawers tightening of piano type hinges fixing of handles etc with drawers adjustment of ball catches etc (one unit shall comprises one cup board irrespectives in numbers of shutters and drawers) complete all as specified and directed.

All as per item No 54 hereinbefore but cupboard (bedroom) excluding drawers complete all as specified and directed.

Petty repairs to leaking bib cock, pillar cocks, Stop cock, angle valve of any description by changing the jumper valve, washers etc and making functional, ensuring proper water supply complete all as specified and directed.

Petty rapairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC syphons leaking PVC bends / GI pipes etc complete all as specified and directed.

Cleaning of air lock in GI pipe and making the water supply available upto water taps including attending the complaints of no water supply and rectifying defects in water supply lines complete all as specified and directed.

Bib tap fancy type chromium plated fixed to 15mm bore in repairs complete including fixed in reapirs all as specified and directed.

Stop valves fancy type chromium plated cast copper alloy screwed both ends 15mm bore for iron pipe or for unions and fixed in repairs

Health Faucet with 8mm dia, 1 m long flexible tube and wall hook with back flow preventer and fixed in repair all as specified and as directed

Palstic water closet seat, coloured, closed pattern with flat bottom and cover with mild steel chromium plated or aluminized hinging device and fixed in repairs all as specified and directed.

Angle valve fancy type chromium plated fixed to 15mm dia complete and fixed in repairs all as specified and directed.

20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe and fixed in repairs (Minimum weight 210 gms.) all as specified and directed.

Lid for polyethylele water storage tank for 500 litres including fixing PTMT nut/ binding wire and fixed in repairs all as specified and directed.

Lid for polyethylele water storage tank for 1000 litres including fixing PTMT nut/ binding wire and fixed in repairs all as specified and directed.

PVC internal fittings for low level flushing cistern complete including fixed in repairs all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 20mm dia fixed in repairs all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 15mm dia fixed in repairs all as specified and directed.

Chroumium plated fancy type long body 2 in 1 bib tap fixed with existing pipe and fixed in repairs all as specified and as directed.

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

PVC flush pipe 32mm bore high density for low level flushing cistern including all joints, washers suitable for pedestal type WC complete all as specified and directed.

Brass Chromium plated over head shower rose 125mm size square/ round shape with shower arm complete all as specified and directed.

Pillar taps, 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs all as specified and directed.

Stainless steel plate rack of size 0.9m X 1.2m complete all as specified and as directed.

Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified and directed.

Grating 125mm dia with waste hole, fixed in repairs all as specified and as directed.

CP toilet paper roll holder fixed in repairs complete all as specified and as directed.

PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets including fixed in repairs complete all as specified and directed.

Vitreous china wash basin, white, flat back, size 550x400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32 mm bore and of suitable length, 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm and fixed in repairs complete all as specified and directed.

PVC waste pipe 32mm dia fixed to WHB / sinks in repairs all as specified and directed.

Brass Chromium plated 40mm bore size waste coupling fitting for kitchen sink/ WHB any type fixed in repairs complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore and connections all as specified and directed

Taking up or down steel tubing and connections for 20mm bore and connections all as specified and directed

15mm bore steel tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed.

20mm bore steel tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed.

Fixing only GI tubes 15mm bore medium grade with all fittings and laid in floor/ wall/ ceiling etc complete all as specified and directed. Note: GI pipe obtained from item No 84 shall be resused including cleaning of pipe and new fittings etc.

Fixing only GI tubes 20mm bore medium grade with all fittings and laid in floor/ wall/ ceiling etc complete all as specified and directed. Note: GI pipe obtained from item No 85 shall be resused including cleaning of pipe and new fittings etc.

Dismantling PVC water tank exceeding 250 ltrs and not exceeding 500 Ltr capacity from existing position all as specified and as directed.

Rotational moulded polyethylene water storage tank 3 layered of capacity 500 Ltr (cylindrical vertical with closed top) hoisted and fixed in position with proper inlet and outlet connections all as specified and as directed

Dismantling PVC water tank 1000 ltrs capacity from existing position all as specified and as directed.

Rotational moulded polyethylene water storage tank 3 layered of capacity 1000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position with proper inlet and outlet connections all as specified and as directed

GI fittings like socket, elbow, tee, nipple, plug etc suitable for 15mm bore pipe complete all as specified and as directed

GI fittings like socket, elbow, tee, nipple, plug etc suitable for 20mm bore pipe complete all as specified and as directed

12mmthick preforated particle board/ tiles for insulation and acoustic purpose, 60 x 60 cm size fixed with staples on snap grid as in ceiling complete all as specified and as directed

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor all as specified and directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster as backing coat in cement mortar 1:4 on fair face of brick or concrete surface

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling of Wrought Iron or Mild steel work of any description not otherwise provided for complete all as specified and directed.

Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle) including distance pieces, cleats etc.of grade Fe-410-W (Gde-E-250) quality-A all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.

GUNASEKARAN AND CO

VVM CONSTRUCTIONS