SPECIAL REPAIR TO BLDG NO T-38 (DINING HALL) OF FIELD WORKSHOP AT MORAR CANTT UNDER GE GWALIOR

Amount

Taking down chowkhat with shutter not exceeding 1.5 sqm each complete all as specified and directed.

All as per above but exc 1.5 sqm but not exceeding 4.0 sqm each complete all as specified and directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed.

S&F MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc complete as specified abd size of frame 125x60mm complete all as specified and directed. Note : Cost of filling of PCC (1:3:6) Type C-0 in hollow portion of frame is deemed included in these items.

S&F MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc complete as specified abd size of frame 105x60mm complete all as specified and directed. Note : cost of filling of PCC (1:3:6) Type C-0 in hollow portion of frame is deemed included in these items.

S &F for factory made solid panel PVC door shutter 30mm thick (style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F plain framed factory made panelled shutter 35mm thick 2nd class HW rail and style with lock raid and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kitn seasoned and chemically pressure treated including preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 35 mm thick factory made glazed and skelton shutters 2nd class HW open rebated and prepared to receive gauage (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred bead for security glass etc. Size of members of shutters as specified in IS 1003 supplied and fitted to chowkhats all as specified and directed into square including preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

Supply and fixing GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed.

M&L plain sheet glass figured quality and glazing with oil putty/Silicone in square but not exceeding 0.5 sqm in each pane 3 mm thick complete all as specified and directed.

M&L plain sheet glass ordinary quality and glazing with oil putty/Silicone in square but not exceeding 0.5 sqm in each pane 3 mm thick complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified and directed.

S&F Alluminium butt hinges of 100mm size type C-22 complete all as specified and directed.

S&F MS 150mm ordinary rat tail springs plate type including rollar plate etc complete all as specified and directed.

S&F extruded aluminium alloy handle of 125mm size fabricated type, anodised complete all as specified and directed.

S&F extruded aluminium alloy handle of 150mm size fabricated type, anodised complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of 200 mm of extruded section complete all as specified and directed.

S&F MS Sliding door bolts rod pattern stove enamelled black with bolts not less than 12mm dia with and including a minimum of 6 bolt and nuts four on bolt plate and two on staple plate of 300 mm size complete all as specified and directed.

Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as directed by Engr-in-charge.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm plain steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding (ridge) to wall fixed with self tapping screws complete all as specified and directed.

M&L hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc including all necessary drilling, bolting or rivetting etc and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description in any position not otherwise provided for complete all as specified and directed.

M&L rolled section as in Rafter purlins, strut etc using MS angle FI or hollow square section etc including cutting welding nut bolt etc complete all as specified and directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and counter shunk for screw, including bending and welding angle necessary gusset plate riveting etc not execeeding 10 kg each brackets confirming to Fe-290 Gde E-165 complete all as specified and directed.

Demolition of wall and ceiling boards fibre pulp insulation etc or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

S&F of false ceiling 4 mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic size 600mm x 600 mm / 595 mm x 595 mm) decorative finish fixed with clips and screw including aluminium snap grid frame work false ceiling of (Main Tee size 38 x 25 x 1.40 mm and Cross Tee 25 x 25 x 1.2 mm and wall angle 25 x 25 x 1.30mm) and with slot for fixing including suspended with 2mm dia. GI war hangers fixed with steel dash through fasteners from purline of the roof complete all as specified and as directed.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:4) on brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint complete all as specified and directed.

Material and labour for Preparing of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coat of cement base paint complete all as specified and directed.

Material and labour for old decorated surface of walls of plastered or unplastered surfaces applying two coat of cement base paint complete all as specified and directed.

M&L Complete removal of existing treatment (internal and external suraces) on walls by scrapping with steel wire brush or any other means including removing vegetables /plants root from wall/chajjas complete all as specified and as directed.

M & L for two coat of oil bound distemper over a coat of Birla wall care putty on plastered surfaces on wall including preparation of surfaces complete all as specified and directed. .

Material and labour for Preparing of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coat of white wash complete all as specified and directed by Engineer -in-Charge.

Material and labour for Preparing of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coat of distamper oil emulsion complete all as specified and directed by Engr-in-Charge.

Material and labour for old decorated surface of walls of plastered or unplastered surfaces applying two coat of distamper oil emulsion complete all as specified and directed by Engr-in-Charge.

Material and labour applying 1 mm thick wall care putty on walls to achive even and fair surfaces complete all as specified and directed by Engineer -in-Charge.

M&L two coat of synthetic enamel paint over coat of Red oxide primer over steel new surfaces nexc 10 cm width or girth complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M&L two coat of synthetic enamel paint over coat of Red oxide primer over steel old surfaces not exceeding 10 cm width or girth complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota stone etc) of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L for machine cut Kota stone slab 20mm to 25 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed.

M&L for machine cut kota stone slab 20mm to 25 mm thick , thick as in riser / steps, skirting, dado, cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L Coloured Glazed Ceramic coloured tiles of any shade type and pattern size 300 x 450 and 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L non skid ceramic Coloured tiles, 300 mm x 300 mm x 7 mm thick in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L white marble stone strip as of border etc in kota flooring machine cut bedded jointed and jointed and pointed with grey cement slurry including cutting and polishing to mirror finish complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) Type C2 using 40mm graded stone agg as in plinth protection/Path etc surface even and smooth without using extra cement complete all as specified and as diected by engineer in charge.

M&L for chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified and directed.

M&L moorum/red bajri filling in floors or pavings laid in layers nexc 15cm thick spread levelled and rammed including watering complete all as specified and directed.

Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed.

M& L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and as directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and directed.

S&F 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete with fittings complete all as pecied and directed.

S&F 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete with fittings complete all as pecied and directed.

S&F in repair PVC (SWR) floor trap 75 mm bore, plain with steel grating including jointing with solvent cement of outlet and fixing in CM type B-I 1:2:4 complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position including all fittings, heads, shoes, bends, swan necks etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with carefully prepare rubber ring joints (or solvent joints) fixed on walls/ ceiling or laid in floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with carefully prepare rubber ring joints (or solvent joints) fixed on walls/ ceiling or laid in floors complete all as specified and directed.

M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes bends any radious with acces door complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes junction, single (single T/Y ) equal or unequal any radious.with acces door complete all as specified and directed.

S&F PVC (SWR) bends, 110 mm bore any radius complete all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore any radius complete all as specified and directed.

S&F rotational moulded poly-ethylene three layered antibactrial film tanks (cylinderical vertical) 1000 litres capacity, white colour hoisted and fixed in position complete all as specified and directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm - 142gms / 20 mm - 210 gms / 25mm - 455gms/ 40mm - 690 gms).

S&F in repair gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed.

Supply only PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle handle including bracket complete of capacity 10 litres.

S&F 15mm angle cock chromium plated, cast copper alloy with capston heads, scewed down high pressure with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair complete all as specified and directed.

S&F Stop valve screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions and fixed in repair complete all as specified and directed.

S&F 15mm ,bib tap fancy type chromium plated, cast copper alloy with capston heads, scewed down high pressure with or without lettered 'Hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair complete all as specified and directed.

Supply only 15mm, pillar taps fancy type chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

S&F for shower rose brass chromium plated without swivel joints, 125 mm in size including fixing to steel pipe complete all as specified and directed.

M&L vitreous china squatting pan, orissa pattern sise 580 x 440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete lived in repairs and making good to floor complete all as specified and directed.

S&F in repairs vitreous china urinals, half stall type, white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F in repair Vitreous China, wash down water closet pan (Pedestal pattern) white colour shade with S&F seat cover including connection to drain and to flush pipe and anti syphonic pipe including all joints etc complete all as specified.

S&F of vitreous china wash basin, white, flat back, size 550 x 400mm Including waste coupling, waste pipe and labour for fixing pillar tap, pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connection will be measured paid as supply only.

S&F for sinks made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed fixed in repair.

Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.

S&F Peg set of six S.S fixed to wall with PVC plugs and screw complete all as specified and directed.

S&F in repair Curtain rail stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete all as specified and directed.

S&F soap dish of CP fixed with PVC rawal plugs and screw complete all as specified and directed.

Demolition of Reinforced Cement concrete of any description and in any position not otherwise specially provided including revomoving debris to a place exeeding 1.5 km and not execceding 5 km outside MD land complete all as specified and directed.

M&L RCC Precast (1:2:4) 20 mm graded stone aggregate as in cover slab lintel bend etc as in including all forms mould etc complete all as specified and directed.

M&L for reinforced cement concrete nominal mix type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) as in slab supported on walls, beams, coumnns in floor, roof, landing complete all as specified and directed.

M&L for reinforced cement concrete nominal mix type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams , base for coloumns and mass concrete etc complete all as specified and directed.

M&L for reinforced cement concrete nominal mix type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) as in beams , cantilevers bressummers , lintel over 1.5 m span etc. complete all as specified and directed.

M&L for use and waste formwork to sides of concrete foundation, footing, base of coulmn, raft, raft beam sides and soffits of foundation and plinth beam for rough finished surfaces of concrete complete all as specified and directed.

M&L for use and waste formwork to sides & soffits of floor or roof beam rough finished surfaces of concrete complete all as specified and directed.

M&L use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200 mm thick (horizontal or sloping) including slab edges for rough finished surfaces of concrete complete all as specified and directed.

S&F mild steel bars 10 mm dia and over (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S.

S&F TMT bars 6 to 8 mm dia cut to length bent to shape required including cracking, bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S.

M&L for mild steel TMT bars 5 mm and over upto and including 10 mm dia as in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L 25 mm thick cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) as in floors, finish rough to receive the floor finishes etc specified and directed.

M&L For Polished Granite slab with round edges (of any type ) 16 mm to 18 mm thick machine cut bedded and jointed wiyh white cement and pigment all as specified and directed.

M&L Providing precast cement concrete louvres and jallies, 25mm thick (measured solid) Type B0 (1:2:4 12.5mm graded aggregate set in CM 1:6, including all mould- ings but excluding frame complete all as specified and directed.

M&L Providing precast cement concrete Type C1 (1:3:6 20 mm graded aggregate) in win- dow or door cills, ntels,bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, Watherings, throating etc and setting in mortar with joints to match complete all as specified and directed.

M&L for Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring with 1.5 sqmm (Nominal Area) PVC insulated FRLS un sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC concealed conduit of heavy grade not less than 20 mm size with all fitings and accessories including factory made MS/ pressed steel terminal box with zinc coated duly concealed in wall including modular metal flush boxes reqd as per site reqmt for mounting switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified. Make of Wire : Finolex / Plaza / Polycab. Make of conduit : Anchor / Presfit.

For one light/fan point controlled by one switch

For one 5 pin socket out let 5 amps on same bd complete.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

Description all as per item No 110 here in before but point wiring with 2.5 sqmm FRLS multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 1.5 sqmm FRLS PVC insulated multi strand copper conductor cable as continous earth wire. Make of Wire : Finolex / Plaza / Polycab. Make of Conduit : Anchor / Presfit.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified. Make : Leader / Legrand / Havells

S&F modular white cover plate with frame of 12/8 module. Make : Leader / Legrand / Havells

S&F modular white cover plate with frame of 06 module. Make : Leader / Legrand / Havells

S&F modular white cover plate with frame of 03 module. Make : Leader / Legrand / Havells

S&F modular switch 1 way 06 amp single pole. Make : Leader / Legrand / Havells

S&F modular switch socket combination 16A, 6 Pin of 3 module. Make : Leader / Legrand / Havells

S&F of modular socket outlet 6A-5 pin combined of 02 module. Make : Leader / Legrand / Havells

S&F of modular fan step regulator 120 W-2 module. Make : Leader / Legrand / Havells

S&F Lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings incl LED Bulb 12W/14W complete. Make of Lamp Holder : Leader/Legrand/Havells. Make of LED Bulb : Philips / Wipro / Havells.

S&F energy saving 9W LED tube rod with batten suitable for surface and wall mounted with polycarbonate housing and integrated electric driver complete as specified and directed. Make : Havells/Philips/Wipro.

S&F ultra bright LED tubelight Batten for LED Tube alongwith LED tube light of 18 w including reqd length of 1.5 Sqmm PVC multistranded copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. Make : Philips / Wipro / Halonix.

S&F of 20W of LED security Light fixture with IP66 protected Die-Cast Aluminum housing and Heat resistive Toughened Glass. Driver shall be 3 stage Constant Current Constant Voltage with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60V DC. Make : Wipro/Philips/Havells.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

M&L sub main wiring with two single core PVC insulated unsheathed FRLS multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLS copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.

S&F Sheet metal enclosure MCB DB, double door , 4 way TPN, 415 volts with 200 Amps rated bus bar with blanking plates wherever required and I.P. 20 degree protection complete. Make of MCBs, MCB DBs & MCCBs : Havells /Seimens /Legrand.

Sheet metal enclosure MCB DB, double door , 08 way SPN, 240 volts with 200 Amps rated bus bar with blanking plates wherever required and I.P. 20 degree protection complete. Make of MCBs, MCB DBs & MCCBs : Havells, Seimens & Legrand.

S&F, MCB TPN 415 Volts 32 to 63 Amps 'B' series including connection with suitable size copper lugs in repair complete all as specified and directed. Make: Schneider /Seimens / Legrand. Make of MCBs, MCB DBs & MCCBs : Havells/Seimens/Legrand.

S&F MCB single pole and neutral 240 volts, 16 to 40 Amps 'B' Series complete. Make of MCBs, MCB DBs & MCCBs : Havells, Seimens & Legrand.

S&F MCB single pole 240 volts, 6 to 32 Amps 'B' Series complete. Make of MCBs, MCB DBs & MCCBs : Havells, Seimens & Legrand.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 4 Core. Make of Cable : Finolex, Polycab, Gloster.

M&L high density polyethylene pipes (HDPE) 50mm dia of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and directed.

S&F tube 'Light' grade galvanised with all fitting laid in trenches fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe etc complete all as specified and directed.

Excavation in trenches not execeeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type soil complete all as specified and directed.

Returning, filling of excavated soil including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50m and depositing where directed at a level not execeeding 1.5m above the starting point complete all as specified and directed.

S&F in repair GI medium grade tubing with all fittings laying in trenches all as specified and directed including taking down old u/s one of the following sizes :-

80 mm bore

50 mm bore

40 mm bore

20 mm bore

S&F in repairs gun metal gate valves/globe valve with iron wheeI head,screwed both ends for iron pipe of the following sizes incl taking down old u/s one of the following sizes :-

80 mm bore

50 mm bore

40 mm bore

20 mm bore

M&L for cutting of existing CI/DI/GI pipe line any size (upto 150 mm bore) including exceeding and earthwork, inserting CI/DI/GI special any size & shape all as specified and directed (CI/DI/GI special incl jointing will be included in quoted rate). Contractor to make arrangements to drain out / pump out accumulated water without any extra cost).

M&L for construction of valve chamber in brick work bought up to course built in cement mortar(1:6) with MS sheet cover in CM 1:4 with MS sheet cover 3.15mm thick and angle iron 50 x 50 x 6mm with locking arrangement including excavation and earth work in any type of soil, , PCC (1:4:8) type D2 for foundation, PCC(1:2:4) type B1 or bed/coping, plastering 15mm thick in CM 1:4 painting all steel surfaces with two coats of bituminous black paint over a coat of anti corrosive red-oxide primer complete all as specified and directed and as shown on drawings of size 900 x 900 x 900 mm.

FTH Traders

M/s Ratan Lal Jain and Co.

M/S MAHAVIR SINGH

M/s Himgiri construction

lodhi builders