REPAIR TO WALL PLASTER FLOORING TILLING TOILET JOINERY AND OTHER ALLIED WORKS IN MD OFFICERS QTRS UNDER AGE BR I OF GE NORTH MEERUT CANTT

Amount

S&F Glazed, gauzed and skeleton shutters 35 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick flush shutters, conforming to IS 2202 (Part-I) - 1999 solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down shutters of any description exc 1 but n exc 2 sqm each, including builders hard ware fittings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing as SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown on page 160 of SSR Part-II complete all as specified and directed.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt having shoot / dia of bolt not less than 10mm complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F 300 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and directed.

S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised,width of flap (when open ) 40 mm. complete all as specified and directed.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate . complete all as specified and directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F hasp and staple, aluminium anodised, safety type, including bolt to hinge plate and fixed with screws, Size of hasp and staple 125mm complete all as specified and directed.

S&F in repairs stainless steel fancy type tubular curtain rod 20mm dia, complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F factory made steel windows with side hung shutter including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F factory made steel windows with side hung shutter including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

M&L for 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard sheleves kitchen cuboard etc including taking down existing material complete all as specified and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed".

M & L for light shade vitrified tiles 10mm thick (minimum), (square / rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed".

M&L for Glazed ceramic coloured tiles of size 350mmx 250mmx7 mm / 450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) complete all as specified and and directed

M&L for 18 to 20 mm thick machine cut Granite stone slab PERFECT BLACK table rubbed polished as in cooking plateform, steps and window cills and like laid over and including 10mm thick screed bed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigmen to match with shade of graniteomplete all as specified and directed.

M&L for rounding to edges of stone slabs two edge full round such as in steps, cooking platform and other similar situation complete all as specified and directed

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick work or one side of lathing on stone masonary surfaces concrete surface, finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:4 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound (I.S.I marked on packing)complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M&L for rendering 15mm thick cement plaster with cement mortar (1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement with using water proofing compound Note :- Water proofing compound will be measured and paid seperately.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing of old decorated surfaces of ceiling ( plastered or un plastered ) including cornics etc and applying one coat of white wash complete all as specified and directed

M&L for preparing the new plastered surfaces and applying two coats of oil bound distemper over a coat of primer on walls completeall as specified and direcrted.

M&L for preparing the newly plastered surfaces and applying two coats of cement base paint on walls / vertical surfaces complete all as specified and direcrted.

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of cement base paint complete all as specified and directed

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat distemper oil emulsion paint complete all as specified and directed

M&L for preparing the old plastered surfaces and applying one coat of white wash on walls complete all as specified and direcrted

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from metal frames including punching or drilling out old glazed pins / spring clip and rubbish off the premises complete all as specified and directed.

Supplied, hoisted and fixed in repairs in position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms complete all as specified and directed.

S&F in repairs bib tap, C P cast copper alloy fancy type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repairs pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supplied and fixed CP WHB mixer single lever without Popup waste system with 450 mm long braided hoses and brass nut suitable to 15mm bore pipe ( Make Jaquar - cat part No QQP-7167BPM) or equivalent in PARKO / Gem complete all as specified and directed.

Supply and fixed in repairs stop valves, 15mm bore dia, cast copper alloy, CP fancy type screwd down,high pressure with crutch or butter fly handle,screwed down both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs angular valve, 15mm bore dia, cast copper alloy, CP fancy type screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs towel ring 200mm dia chromum plated fancy type conforming to the sample kept in the office of Engineer-in-Charge.

Supplied and fixed in repairs CP toilet paper holder conforming to the sample kept in the office of Engineer-in-Charge.

Supplied and fixed brass CP soap dish as per sample kept in the office of Engineer-in-Charge

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supplied and fixed in repairs vitreous china WHB, white, flat back size 580x450mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

Supply and fixing in repairs vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

S&F vitreous china wash down water closet pan (padestal pattern), white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc and S/F Plastic water closet seat cover of any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Supply and fixing in repairs PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

Supplied and fixed in repairs 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified and directed

S&F in repairs sinks with drainage board made of stainless steel 1mm thick sheet for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs plate rack of stainless steel, sheet 1mm thick for kitchen overall size 750x900x250 mm ,fixed with plugs and washers on wall complete all as specified and directed.

S&F glass shelf assembly 60 cm long , 5.5 mm thick glas & 12cm wide CP guard and railing fixed to wooden plug with CP screws and cup washer as specified complete all as specified and directed.

S&F in repairs 8mm dia, brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed Make - Jaquar Cat No ALD-573 or equivalent in Parko, Gem

S&F in repairs plastic seat cover black / white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed

Supplied and fixed in repairs Stainless steel grating doom 100 mm dia and waste hole (minimum weight 40 gms) complete all as specified and directed.

vibha associates

AEGIS INTERNATIONAL

M/S AMAR ELEKTRO CENTRE

Manglam Engineers and Construction Co

veer enterprises

H.B. Traders

B.K.construction