Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹46.9 LAdmitted-Finance | -27.06% | ₹46.9 L | L1 | Admitted-Finance |
| 2 | L2₹49.8 LAdmitted-Finance | -22.53% | ₹49.8 L | L2 | Admitted-Finance |
| 3 | L3₹52.3 LAdmitted-Finance | -18.69% | ₹52.3 L | L3 | Admitted-Finance |
| 4 | L4₹53.3 LAdmitted-Finance | -17.17% | ₹53.3 L | L4 | Admitted-Finance |
Tender Value
₹64.3 L
EMD Value
₹1.3 L
Closing Date
16 Jan 2026, 4:00 pmClosed
Executive Engineer CP
ROOM NO.1611, 16TH FLOOR, PALIKA KENDRA, NEW DELHI
Restoration of Footpath Cut by Agency IGL at Middle Circle Connaught Place under the Jurisdiction of Hanuman Road Service Center.
2026_NDMC_284449_1
34/EE(CP)/2025-26
Open Tender
Civil Works
90 days
PALIKA KENDRA
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹1.3 L
29 Jan 2026
8 Jan 2026
16 Jan 2026
8 Jan 2026
16 Jan 2026
8 Jan 2026
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
Dismantlin, CC/RCC slab/ DQ Stone flooring laid in cement mortar including removal of mortar, stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10 graded stone aggregate 20 mm nominal size Recycled Aggregate (RA) )
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).
Providing and laying DQ stone flooring of size 100x100 mm and 70 - 80 mm thick and laid over 20 mm (average) thick base of mix cement mortar 1:4 (1 cement : 4 coarse sand) laid finishing joints with 10 mm thick and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) with and admixture of pigment to match the shade of stone complete as per instruction and pattern approved by Engineer-In-Charge.
Laying of old DQ stone flooring of size 100x100 mm and 70 - 80 mm thick and laid over 20 mm (average) thick base of mix cement mortar 1:4 (1 cement : 4 coarse sand) laid finishing joints with 10 mm thick and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) with and admixture of pigment to match the shade of stone complete as per instruction and pattern approved by Engineer-In-Charge.
Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin-charge. (Old CC paver blocks shall be supplied by the department free of cost).
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1;3 ( 1 cement ; 3 coarse sand ) including making joints with or wihtout grooves ( thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment). (Precast C.C Kerb stone shall be approved by Engineer-in-charge).
Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost)
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading the same at any C&D waste management site within 25 Kms. Lead i.e. Shastri Park/ Burari/ Mundka including weighting at plant etc. complete as per direction of Engineer-In-Charge . Weighting and unloading at the plant shall be as per procedures / rules of the C&D Waste plant . The processing fee of C&D management at prescribed rats will be deposited by the agency and the same shall be reimbursed by the department on production of only original cash receipts and as per direction and entire satisfaction of engineer-in-charge
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. Red sand stone
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. White sand stone
Precasting and placing in position 150 mm dia Precast RCC Bollards 910 mm high of required shape without base plate including embedded 150mm in cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources), including necessary excavation of size 250x250x450mm deep for the same in bitumen/ concrete pavement at specified spacing.as per direction of Engineer-in-charge.
Providing and laying Hand cut Granite stone Cobbal flooring of pattern hexagon or required at site of size 80mm to 100mm from end to end and 30mm thick and laid over 20 mm (average) thick base of mix cement mortar 1:4 (1 cement : 4 coarse sand) laid finishing joints with 10 mm thick and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) with and admixture of pigment to match the shade of stone complete as per instruction and pattern approved by Engineer-In-Charge.
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 18mm thick Granite stone slab of colour black, Cherry/Ruby red.Area of slab upto 0.50 sqm.
Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineerin- Charge.With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.20 MB
tender.pdf
Tender Documents • 1.56 MB
BOQ_376216.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid