Conversion of 11 KV OH line RE 2 Fdr to underground cable to clear hindrance posed to ongoing railway construction work at Dera to Rakas road in Jagannath OCP MCL in favor of Project Engineer EM JOCP, MCL under Hatatota Electrical Section.

Supply of WPB (GI) Pole 160× 152 (11 Mtr.Long, 30.44KG/Mtr)

Supply of 11kV, 3Core, 400sqmm, XLPE insulation armoured UG cable (SC rating of cable in kA- 37.7kA and SC rating of Armour in kA- 15kA)

Erection, Loading, Unloading of WPB pole 11 mtr height, in cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required and Muffing with Concrete ratio 1:1.5:3 with dimension 500mmX500mmX450mm

Supplying and erection of two lengths of G.I. channel iron 100 mm X 50 mm X 6 mm (9.56 kg per metre)each of 3 mtr length double pole cross arm for three wire 11 KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm G.I. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts, washers etc as required for DP without Isolator

Supply & Erection of GOAB Switch Double Break type 11kV, 400A, 3 Pole, 50Hz with AB switch mounting channel,isolator support channel, isolator operating down pipe support, down pipe diagonal support, down pipe base support, isolator side support channel with nut & bolt and other accesories as required.

Supplying and erection of 2 set of cross bracing frame work for 11 KV over head line double pole structure (1- One cross bracing consists of 2 nos 3 mtr long,75 mm X 40 mm X 6 mm GI belting channel and 2nos 3.512 mtr long, 50mmX 50mmX 6mm GI bracing angle) complete with 50 mm X 6mm G.I. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts, washers etc as required for DP structure with Isolator

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.