REPAIR REPLACEMENT TO EXTERNAL INTERNAL PERIODICAL ROOF TREATMENT PLASTERING JOINERY SANITARY PLUMBING AND OTHER MISC BR ITEM IN OFFRS MD ACCN AT KIRBY PLACE UNDER AGE BR I OF GE NORTH DELHI CANTT10

Amount

Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition) of any description and in any position not otherwise specially provided complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) of any thickness of any description and in any position not specifically provided for complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors over 15mm thick screed bed or bedding layer in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing plaster, removing serviceable tiles to store and rubbish off the premises all as specified and directed.

All as per the description of srl item No 3 above but as in vertical surface as skirting, dado and risers to steps over and including 10mm thick rendering/backing coat in cement mortar 1:4 all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over 15mm thick screed bed or bedding layer in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing plaster, removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L glazed ceramic coloured tiles as in vertical surface area of each tile between 0.14 to 0.18 Sqm each set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in CM 1:4 and finished rough, complete including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing plaster, removing serviceable tiles to store and rubbish off the premises all as specified & directed.

M&L 3D exterior designer coloured matt finished wall tiles 300x600mm design as approved over 10mm thick rough finished rendering in cement mortar 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing, removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for double charged vitrified coloured tiles shade as approved 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.0 sqm, as in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over screed bed or bedding layers of mortars 15mm thick in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing plaster, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

All as per the description of srl item No 8 above but as in vertical surfaces such as skirting/ dado over and including 10mm thick rendering in CM 1:4.

M&L 20 to 25mm thick pre-polished machine cut Kota stone slab in repair as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including moulding the edge of slab complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.

M&L 20 to 25mm thick pre-polished machine cut Kota stone slab as in repair of riser or vertical surface over and including 10mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including moulding the edge complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.

M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in chajjas complete all as specified and directed. Note:- Reinforcement is to be measured and paid separately.

M&L reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note:- Reinforcement is to be measured and paid separately.

Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Formwork to sides and soffits of slabs n. exc. 200mm thick and similar works rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, throughs and similar items including edges complete all as specified and directed.

M&L brickwork with subclass 'B' Brick straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:6 complete including demolition of the the brick work at any position all as specified.

Taking down existing cement plaster or complete removal of existing pointing and finishes including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on faces of brick work or concrete external surfaces of wall mixed with liquid water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note:- The WPC shall be measured and paid separately.

M&L 15mm thick rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished even and smooth without using extra cement complete all as specified and directed.

M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smooth complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing old decorated plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 2mm thick wall care putty and chalk whiting on plastered surfaces preparatory to distempering complete all as specified and directed.

M&L for complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, with filling crack, making good uneven surface/broken corner of RCC members etc with water proof wall care putty or white cement and applying two coats of cement base paint over one coat of primer of approved shade complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided all as specified and directed

S&F steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections incluidng cleaning for refixing or removal to store complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections incluidng cleaning for refixing or removal to store complete all as specified and directed.

All as per the description of srl item No 29 above but except GI tubing.

All as per the description of srl item No 30 above but except GI tubing.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double alyered hoisted and fixed in position including connecting up pipes including dismantling of PVC water tanks complete all as specified and directed.

S&F in repairs 20mm gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20mm bore size (Minimum weight 210gms), complete all as specified and directed.

S&F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20mm bore size (Minimum weight 210gms), complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 75mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75mm bore, complete all as specified and directed.

S&F PVC (SWR) bends with access door any radius, 75mm bore, complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm bore, complete all as specified and directed.

S&F PVC (SWR) bends with access door any radius, 110mm bore, complete all as specified and directed.

S&F PVC (SWR) vent cowl, 75mm bore complete all as specified and directed.

S&F in repairs Stainless steel plate rack (utensil rack) of size (600mm x 750mm) and depth 300mm made with 0.55mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified and directed.

S&F in repair soap dish disc (oval) type, mild steel chromium plated of approximate size 100 x 50 x 10mm, complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair Viitreous china premium/1st quality wash down water closet wall hung EWC white/ivory/off white (closed pattern including seat cover and all necessary accessories like rag bolts/gel gasket etc, (excluding flushing cistern & flush pipe) complete in all respect all as specified.

S&F in repair vitreous china valveless, syphonic action type, flushing cistern, with dual flush bottons of capacity 10 ltrs low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

S&F in repairs sheet Glass shelf assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate mix with WPC complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board, made out of 1.00mm thick sheet with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs tubular towel rail of brass chromium plated, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed.

S&F in repairs bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F in repairs brass CP mixer/wall mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore including connection pipe and fittings complete all as specified and directed.

S&F in repairs wall mixer with provn for over head showers with 115mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed.

S&F in repairs sink wall mixer for sink including legs and wall flanges and all necessary fittings make it functional complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 65 to 90mm size with swivel joints, wall flange complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600mm long complete all as specified and directed.

S&F in repairs PVC connection 600mm long and 15mm dia with brass fly nut at both ends complete all as specified and directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, of size 580mm x 440mm white with integral foot rest, P or S trap complete including cement concrete bedding, outgoing flushing pipe, anti syphonage pipe etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) including trap, white including fixing bolts, flushing cistern and flush pipe connection to trap and to flushing pipe in bend cluding provn of cement concrete beading complete all as specified and directed.

S&F EWC seat cover white colour as approved of PVC closed pattern with flat bottom and mild steel lchromium plated or aluminised hinging device complete all as specified and directed.

S&F vitreous china wash hand basin white, flat back of size 550mm x 400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.

S&F 32mm dia bore low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to walls,ceilings or in floors etc for WHB and sink complete all as specified and directed.

S&F in repair chromium plated brass angle valve concelled type for 15mm bore pipe, fixed in repairs complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified and directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified and directed.

Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling & fixing in oening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for tip & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together wit solvent cement, supplilng & fixing in the frame at site as per specification & drawing.

S&F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebeated sash bars, any numbers, beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per the description of srl item No 75 above but without glazing bars

S&F sheet glass ordinary quality, 4mm thick and glazing with oil putty or wooden beading in square n.exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs solar reflective glass green in colours, 6mm thick and glazing with glazing clip ruber beading area n.exc. 1.0 Sqm in each pane complete including scaffolding or jhoola all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel wire staples, wooden beads, tinned tacks to steel windows and wooden doors shutters complete.

S&F in repairs stainless steel, wire cloth 0.56mm nominal dia of wire, and average width of aperture 1.18mm and fixed to steel or wooden window or doors with oil putty or wooden beading and necessary fixing arrangement complete all as specified.

S&F flush shutters 35mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides with leaping and beading complete.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

S&F powder coated of any colour aluminium door shutters, aluminium section weighing 0.55 kg/m incuding necessary joining cleats, glazing clips, ruber neoprene packing handles 2 Nos, tower bolt in each door shutter, hinges powder coated aluminum snap beading screws etc, complete all as specified.

S&F powder coated of any colour aluminium window and ventilator shuttrs, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading screws etc complete all as specified

Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, door frame etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete.

S&F mild steel, plain, black sheet of 1.60mm thick in wall cladding steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as required

Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified.

M&L for 15 to 18mm thick PVC sheet for kitchen cabinet and cubboard shutter consisting of carcass one side decorative lamination and other side balancing white fixed with approved adhesive and self tapping screws for kitchen cup board or wardrobe all as specified and directed

M&L for 18mm thick PVC sheet for kitchen cabinet and cubboard consisting of carcass one side decorative lamination and other side balancing white fixed with approved adhesive and self tapping screws for kitchen cup board or wardrobe complete all as specified and directed.

S&F for 20mm wide & 1mm thick PVC edge beading pasted to edges of PVC furniture with suitable adhesive for kitchen cup board or wardrobe complete all as specified and directed.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed.

S&F continuous (piano) hinges of width 30mm when open flap) , mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140mm complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 4 levers brass cupboard locks grade-I, size 65mm complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F butt hinges, 100mm size medium weight, cold rolled mild steel complete all as specified and directed.

S&F aluminium handles 150mm size cast type, anodised complete all as specified and directed.

S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.

S&F stainless steel chromium plated tubing of 25mm dia curtain rod fancy type including fancy type CP brabs brackets (wall to wall or flush to wall) with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repair complete.

M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed.

M&L for two coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed.

M&L for 40mm thick plain cement concrete 1:2:4 type B-1, (20mm graded crushed stone aggregate) as in floors and finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed.

M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

Removing of existing water proofing membrane, damage plaster, vegitation/plants, PCC, mud fuska, brick tile,Tar-felt, loose particles and all foreign materials over the roof and removal of debris from site to out-side area complete all as specified and directed.

Cleaning the surface & removing of dust, existing paints from wall & roof surface, finding visible crack Making V - groove by machine on crack area, providing & applying polymer bonding agent 1:2 & filling those grooves by modified cement & sand mortar 1:4 with WPM liquid (5% by wt. of cement). Waterproofing coating-Providing & applying 1st coat WPM with brush/roller after mixing with cement at 1:1.5 (1 part of WPM and 1.5 part of cement & 2nd coat with an interval of 10 to 12 hrs by brush or roller to get average thickness of 1.5mm. The system will be allowed to air cure for 7 days covering including parapet both side wall.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in string courses, copings or as in floors complete all as specified and directed.

M&L for preparation of new or old plastered surfaces of wall with filling crack, making good uneven surface/broken corner of RCC members etc with water proof wall care putty or white cement and applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface complete all as specified and directed.

S&F in repairs for gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick or 600 x 600 x 4mm to 6mm thick E-board of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24mm for main, 25x24mm for cross tee and 20mm x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200mm on main runners including making niches for fans/light at complete all as specified and directed.

Taking down brick tiles, terracing tiles or single layer APP from roof laid, bedded and pointed in any mortar all as specified & directed.

Demolition of mud phuska/cement concrete in roof any thickness, including plaster and leaping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L roughening surfaces of old concrete surfaces by picking sweeping, cleaning old surface and washing down with water to remove dust etc complete all as specified and directed.

M&L 40mm thick cement concrete type C -1, 1:3:6 (20mm graded crushed stone aggregate as in padding over roof complete all as specified and directed.

M&L 15mm thick screed in CM 1:3 finished even and smooth mixed with water proofing compound complete all as specified and directed. Note:- WPC shall be measured and paid separately

M&L for water proofing treatment on roof slab consisting with following operations:- (i) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wire brush & dusting, Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 lit/Sqm on the surface. Laying 3mm thick APP membrane having non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm side overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners over a coat of hot itumen 85/25 @ 1.2 Kg per Sqm over primer. The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor (Note- The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability, < 0.5% when tested as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufacturers' (ii) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane. (iii) Dusting dry sand @ 0.75 Kg per Sqm and applying two coat of silver paint over the membrane. (iv) Prepration of surfaces and applying two coat of aluminium solar reflective paint of complete surfaces.

M&L for clean the wall, roof, chajja and beam surfaces by removal of grown plant and injecting with chemical glyphosphate solution (4% concentration) @ 20ml or till refuse by cutting or injection in stem of plants and roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate (4% concentration) diluted with 1ltr of water.The size of block considered as whole bldg. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base paint or acrylic paint with necessary scaffolding all as specified and directed.

Disconnecting existing overhead tanks, setting aside or lowered if required for repairing ,cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 250 litres and not exc 500 litres complete all as specified & directed.

Disconnecting existing overhead tanks,setting aside or lowered if required for repairing ,cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 500 litres and not exc 1000 litres complete all as specified & directed.

M&L for cleaning and removing all scale and dirt, etc from PVC tanks of capacity exc 250 & n exc 500 ltrs and from mouths of circulating pipes etc.

M&L for cleaning and removing all scale and dirt, etc from PVC tanks of capacity exc 500 & n exc 1000 ltrs and from mouths of circulating pipes etc.

Cleaning and removing all scales and dirt etc from RCC tank and from mouths of circulating pipe etc for 35000 ltrs capacity of RCC tanks, complete all as specified and directed. (Up to G +8 Storey)

S&F in repairs 15mm bore bib cock brass CP alloywith long thread, with long body, wall flange screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified.

S&F in repairs snow white vitreous china EWC single peice type 700 x 370 x 645mm including seat cover and flush fittings complete fixed in floor with brass screw complete all as specified and directed.

Dismantling of plain or corrugated steel/ fibre sheeting of any guage as in roof covering including ridges/gutters etc of any description straight or curved at height upto 15mtr complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at height upto 15m complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground , complete all as specified and directed.

Excavation in post hole or similar holes each n. exc 0.50cum in hard/dense soil and getting out returning filling in ramming earth or broken rubble mixed earth around a layer of n.exc. 25cm all as specified and directed

S&F steel work in tubular trusses Fe 410-W (Gde-E-250) quality A including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240

M&L granite 18-20mm thick colour as approved ( of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over 15mm thick screed bed in cement mortar 1:6) including moulding and polishing the edges all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in subase of floor, complete all as specified and directed.

M&L for sand filing under floors or in foundations including watering and consoldation complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block of colour Red/Yellow glossy type any shape and size, as approved by Engr-in-Charge confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed.

S&F aluminium powder coated three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass and wire guage with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below:- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50mm. (Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50mm. (Section No 21446) (c) Top & side members of shutter section shall be of size 18.00 x 40.00 x 1.50mm. (Section No 21455) (d) Interlock Section of Shutter shall be of size 18.00 x 40.00 x 1.50mm. (Section No 21454) (e) Bottom Members of shutter section shall be of size 18.00 x 40.00 x 1.50mm. (Section No 20844)

M&L for 15mm thick cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) mixed with WPC @ 200 ml @ 50 Kg of cement complete all as specified and dierected. Note:- The WPC shall be measured and paid separately

Supply only liquid water proofing compound

DEEP ASSOCIATES

P.H. CONSTRUCTION CO.

M/S AADI ENTERPRISES

The new hut furnitures

Paradise Interior

Keshav Brothers

M/S SIMRAN CONSTRUCTION CO